Evaluation of control and modulation methods for modular multilevel converters
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The modular multilevel converter is a promising converter technology for various high-voltage high-power applications. Despite the apparent simplicity of the circuit, the inherent dynamics of the converter and the balancing of the sub-module capacitor voltages impose high requirements on the control system, which can be implemented in quite different ways. To illustrate this, and to provide a guidance for future research on the subject, this paper presents an evaluation of four different control and modulation methods. The investigation is based on experiments on a down-scaled 10 kVA converter having 10 submodules per phase leg. The main items to be investigated are dynamics within the sub-modules, arm voltages and circulating currents. It is found that the suggested open-loop control method provides the fastest arm-voltage response and that the balancing approach based on a sorting algorithm is substantially faster and less complicated to implement than the method using a dedicated voltage controller for each sub-module.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New AC/AC Multilevel Converter Family
Glinka, M., & Marquardt, R. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.843973 · Cited by 772 · cited 2×
“Publications, describing the operation of the converter and discussing both simulations and experimental results, are mainly aiming for HVDC transmission [2], [3] and for traction and motor-drive applications [4]–[6].”
BackgroundMethod
Cited by
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210
Ilves, K., Antonopoulos, A., Norrga, S., & Nee, H.-P. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2159809 · Cited by 578
Self-citationDekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
“Hence, the carrier PWM modulator should be redesigned by the converter configuration, which further affects the flexibility in extending the existing MMC system to the higher voltage levels [105].”
Predictive Control of a Modular Multilevel Converter for a Back-to-Back HVDC System
Qin, J., & Saeedifard, M. (2012) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2012.2191577 · Cited by 428
Open-Loop Control of Modular Multilevel Converters Using Estimation of Stored Energy
Angquist, L., Antonopoulos, A., Siemaszko, D., Ilves, K., Vasiladiotis, M., & Nee, H.-P. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2168593 · Cited by 346
Self-citationModular Multilevel Converter AC Motor Drives With Constant Torque From Zero to Nominal Speed
Antonopoulos, A., Angquist, L., Norrga, S., Ilves, K., Harnefors, L., & Nee, H.-P. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2286217 · Cited by 297
Self-citationSolas, E., Abad, G., Barrena, J. A., Aurtenetxea, S., Carcar, A., & Zajac, L. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2210378 · Cited by 291
Bergna, G., Berne, E., Egrot, P., Lefranc, P., Arzande, A., Vannier, J.-C., & Molinas, M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2225397 · Cited by 267
Catalán, P., Wang, Y., Arza, J., & Chen, Z. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3234221 · Cited by 197
“5 shows the diagram of MMC comprising an even number of submodules (SMs) connected in series per phase.”
BackgroundInfluentialActive Redundant Submodule Configuration in Modular Multilevel Converters
Konstantinou, G., Pou, J., Ceballos, S., & Agelidis, V. G. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2264950 · Cited by 152
“verter and balancing of the SM capacitor voltages [6]–[9], [15].”
BackgroundIlves, K., Antonopoulos, A., Harnefors, L., Norrga, S., Angquist, L., & Nee, H.-P. (2011) · IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2011.6120033 · Cited by 112
Self-citationA modulation reconfiguration based fault-tolerant control scheme for modular multilevel converters
Shen, K., Xiao, B., Mei, J., Tolbert, L. M., Wang, J., Cai, X., & Ji, Y. (2013) · 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2013.6520766 · Cited by 58
“5, 1], if the modulation wave, based on the direct modulation method [15], is limited in the range [-1, 0.”
BackgroundGeneralized modeling and simulation of a modular multilevel converter
Perez, M. A., & Rodriguez, J. (2011) · 2011 IEEE International Symposium on Industrial Electronics · doi:10.1109/isie.2011.5984441 · Cited by 53
Analysis and Reduction of the Output Voltage Error of PWM for Modular Multilevel Converters
Fuchs, S., Beck, S., & Biela, J. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844821 · Cited by 25
Metadata
- Authors
- Siemaszko, D., Antonopoulos, A., Ilves, K., Vasiladiotis, M., Angquist, L., & Nee, H.-P.
- Venue
- The 2010 International Power Electronics Conference - ECCE ASIA -
- Publisher
- IEEE
- Published
- 2010-06
- Pages
- 746-753
- OpenAlex
- W2089063085
- Cited by
- 147
- References
- 1
- FWCI
- 20.09
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.