Scaling walls: Applying dry adhesives to the real world
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
We present two foot mechanisms that allow relatively large patches of synthetic fibrillar dry adhesives applied inexactly by a climbing robot to perform at levels previously obtained only for small samples in precisely aligned and controlled bench-top tests. The mechanisms are inspired by the structures found in the toes of the gecko. The first mechanism uses ankles with roll and yaw flexures and a compliant structure behind the adhesive material to achieve approximately uniform pressures under nominal loading conditions on flat and curved surfaces. The second design uses a tendon-supported structure to achieve uniform loading and prevent premature peeling failures despite significant misalignment with a flat wall surface. The two designs are demonstrated on Stickybot III, an approximately 1 kg climbing robot, and can be scaled to larger areas and loads by tiling the basic structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Smooth Vertical Surface Climbing With Directional Adhesion
Kim, S., Spenko, M., Trujillo, S., Heyneman, B., Santos, D., & Cutkosky, M. R. (2008) · IEEE Transactions on Robotics · doi:10.1109/tro.2007.909786 · Cited by 661
Self-citationParness, A., Soto, D., Esparza, N., Gravish, N., Wilkinson, M., Autumn, K., & Cutkosky, M. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0048 · Cited by 277
Self-citationWaalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives
Murphy, M. P., Kute, C., Mengüç, Y., & Sitti, M. (2011) · The International Journal of Robotics Research · doi:10.1177/0278364910382862 · Cited by 247
Directional adhesion of gecko-inspired angled microfiber arrays
Lee, J., Fearing, R. S., & Komvopoulos, K. (2008) · Applied Physics Letters · doi:10.1063/1.3006334 · Cited by 172
Mini-Whegs TM Climbs Steep Surfaces Using Insect-inspired Attachment Mechanisms
Daltorio, K. A., Wei, T. E., Horchler, A. D., Southard, L., Wile, G. D., Quinn, R. D., Gorb, S. N., & Ritzmann, R. E. (2009) · The International Journal of Robotics Research · doi:10.1177/0278364908095334 · Cited by 108
Descriptive and functional anatomy of the digital vascular system of the tokay, Gekko gecko
Russell, A. P. (1981) · Journal of Morphology · doi:10.1002/jmor.1051690305 · Cited by 70
Cited by
The Gecko’s Toe: Scaling Directional Adhesives for Climbing Applications
Hawkes, E. W., Eason, E. V., Asbeck, A. T., & Cutkosky, M. R. (2013) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2012.2209672 · Cited by 112
Self-citationMicrowedge Machining for the Manufacture of Directional Dry Adhesives
Day, P., Eason, E. V., Esparza, N., Christensen, D., & Cutkosky, M. (2013) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4023161 · Cited by 112
“In particular, the 0.8 kg StickybotIII robot climbs using approximately 7 cm 2 of adhesive per foot, and the 4 kg RiSE robot climbs using approximately 20 cm 2 per foot (both robots have four feet and lift two at a time) [25].”
MethodInfluentialSelf-citationControllable ON-OFF adhesion for Earth orbit grappling applications
Parness, A., Hilgendorf, T., Daniel, P., Frost, M., White, V., & Kennedy, B. (2013) · 2013 IEEE Aerospace Conference · doi:10.1109/aero.2013.6497364 · Cited by 39
“through the center of pressure, a mechanism similar to that employed on the RiSE robot at Stanford University was used [38] (A similar mechanism was also used on the Stickybot III platform [39]).”
Method
Metadata
- Authors
- Hawkes, E. W., Ulmen, J., Esparza, N., & Cutkosky, M. R.
- Venue
- 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems
- Publisher
- IEEE
- Published
- 2011-09
- Pages
- 5100-5106
- OpenAlex
- W2147090047
- Cited by
- 39
- References
- 6
- FWCI
- 11.62
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.