Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 247Adhesion, Friction, and Surface InteractionsRobotic Locomotion and ControlPower Line Inspection Robots

The DOI matches its Crossref record; 68 of the 69 references it cites were found in a registry or an index.

Waalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives

Murphy, Michael P., Kute, Casey, Mengüç, Yiğit, Sitti, Metin·2011·The International Journal of Robotics Research

Abstract

This paper presents the design and optimization of a wall-climbing robot along with the incorporation of autonomous adhesion recovery and a motion planning implementation. The result is Waalbot II, an untethered 85 g robot able to climb on smooth vertical surfaces with up to a 100 g payload (117% body mass) or, when unburdened, on planar surfaces of any orientation at speeds up to 5 cm/s. Bio-inspired climbing mechanisms, such as Waalbot II’s gecko-like fibrillar adhesives, passive peeling, and force sensing, improve the overall climbing capabilities compared with initial versions, resulting in the ability to climb on non-smooth surfaces as well as on inverted smooth surfaces. Robot length scale optimization reveals and quantifies trends in the theoretical factor of safety and payload carrying capabilities. Autonomous adhesion recovery behavior provides additional climbing robustness without additional mechanical complexity to mitigate degradation and contamination. An implementation of a motion planner, designed to take into account Waalbot II’s kinematic constraints, results in the ability to navigate to a goal in complex three-dimensional environments while properly planning plane-to-plane transitions and avoiding obstacles. Experiments verified the improved climbing capabilities of Waalbot II as well as its novel semi-autonomous adhesion recovery behavior and motion planning.

Overview

Integrity signals

Registry

Crossref · 10.1177/0278364910382862

Cites

68 of 68 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 69 references

Research works printed but not linked: 26

  1. Asbeck, A., International Conference on Robotics and Automation
  2. Berengueres, J., IEEE International Conference on Robotics and Automation
  3. Bretl, T., Workshop on Algorithmic Foundations of Robotics (WAFR’04)
  4. Bretl, T., International Conference on Robotics and Automation
  5. Cacopardo, G., 6th International Conference on Climbing and Walking Robot
  6. Fei, Y., The Sixth World Congress on Intelligent Control and Automation, 2006 (WCICA 2006)
  7. Halaas, D., Proceedings 2009 AIAA Infotech@Aerospace Conference
  8. Hirose, S., Fifth International Conference on Advanced Robotics, 1991. ’Robots in Unstructured Environments’, 91 ICAR
  9. 10.1111/j.1095-8312.1996.tb01451.x · DOI · Paper page
  10. Kalra, L.P., IEEE International Conference on Robotics and Biomimetics, 2006 (ROBIO ’06)
  11. Kim, H., International Conference on Climbing and Walking Robots (CLAWAR)
  12. Kim, S., Proceedings of the 12th International Conference on Advanced Robotics (ICAR) 18-20 July 2005
  13. Lee, J., 2008, Applied Physics Letters, 93, 19191
  14. Miyake, T., Proceedings of IEEE/IASME International Conference on Advanced Intelligent Mechatronics
  15. Morisset, B., IEEE International Conference on Robotics and Automation
  16. Saad, E., Proceedings 2009 AIAA Infotech@Aerospace Conference 6-9 April 2009
  17. Saboori, P., IEEE International Conference on Robotics and Biomimetics (ROBIO)
  18. Santos, D., IEEE International Conference on Robotics and Automation, 2008 (ICRA 2008)
  19. Shen, W., 2005, IEEE International Conferenceon Mechatronics and Automation, 4, 2072
  20. Unver, O., 2005, Infotech@Aerospoace, 1
  21. Unver, O., International Conference on Robotics and Automation
  22. Unver, O., IEEE International Conference on Robotics and Automation
  23. Wu, S., Proceedings of the 2006 IEEE International Conference on Mechatronics and Automation
  24. Yan, W., IEEE International Conference on Robotics and Automation
  25. Yuan Qian, Z., 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems
  26. Zhu, T., IEEE International Conference on Robotics and Biomimetics, 2006 (ROBIO ’06)

Cited by

See all 247

Metadata

Authors
Murphy, M. P., Kute, C., Mengüç, Y., & Sitti, M.
Affiliations
Carnegie Mellon University (US)
Corresponding author
Sitti, Metin
Venue
The International Journal of Robotics Research
Published
2010-10-13
Volume
30
Issue
1
Pages
118-133
ISSN
  • 0278-3649 (ISSN-L)
  • 1741-3176
OpenAlex
W1974667452
Cited by
247
References
69
Citations by year
2026: 14 · 2025: 13 · 2024: 14 · 2023: 19 · 2022: 19 · 2021: 19 · 2020: 12 · 2019: 18 · 2018: 19 · 2017: 10 · 2016: 13 · 2015: 15 · 2014: 20 · 2013: 17 · 2012: 15
FWCI
21.36
Type
journal article
Language
en
Open access
closed
Licence
journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
Locations
The International Journal of Robotics Research (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
  • Physical Sciences › Engineering › Control and Systems Engineering › Robotic Locomotion and Control
  • Physical Sciences › Engineering › Mechanical Engineering › Power Line Inspection Robots
Keywords
wall-climbing robot, fibrillar adhesives, gecko-inspired adhesion, force sensing, motion planning, untethered robots, safety factor, non-smooth surfaces, obstacle avoidance

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Waalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives. https://app.cochat.ai/papers/10.1177/0278364910382862
The paper
Murphy, M. P., Kute, C., Mengüç, Y., & Sitti, M. (2011). Waalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives. The International Journal of Robotics Research. https://doi.org/10.1177/0278364910382862

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.