The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal interface materials for power electronics applications
Open accessAbstract
In a typical power electronics package, a grease layer forms the interface between the direct bond copper (DBC) layer or a baseplate and the heat sink. This grease layer has the highest thermal resistance of any layer in the package. Reducing the thermal resistance of this thermal interface material (TIM) can help achieve the FreedomCAR program goals of using a glycol water mixture at 105degC or even air cooling. It is desirable to keep the maximum temperature of the conventional silicon die below 125degC, trench insulated gate bipolar transistors (IGBTs) below 150degC, and silicon carbide-based devices below 200degC. Using improved thermal interface materials enables the realization of these goals and the dissipation of high heat fluxes. The ability to dissipate high heat fluxes in turn enables a reduction in die size, cost, weight, and volume. This paper describes our progress in characterizing the thermal performance of some conventional and novel thermal interface materials. We acquired, modified, and improved an apparatus based on the ASTM D5470 test method and measured the thermal resistance of various conventional greases. We also measured the performance of select phase-change materials and thermoplastics through the ASTM steady-state and the transient laser flash approaches, and compared the two methodologies. These experimental results for thermal resistance are cast in the context of automotive power electronics cooling. Results from numerical finite element modeling indicate that the thermal resistance of the TIM layer has a dramatic effect on the maximum temperature in the IGBT package.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Interface Materials: Historical Perspective, Status, and Future Directions
Prasher, R. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.879796 · Cited by 927 · cited 9×
“The environment in automotive power electronics is harsher than it is in computer microelectronics [5].”
Influential
Cited by
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
Novel nanostructured thermal interface materials: a review
Hansson, J., Nilsson, T. M. J., Ye, L., & Liu, J. (2018) · International Materials Reviews · doi:10.1080/09506608.2017.1301014 · Cited by 441
Metadata
- Authors
- Narumanchi, S., Mihalic, M., Kelly, K., & Eesley, G.
- Venue
- 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
- Publisher
- IEEE
- Published
- 2008-05
- Pages
- 395-404
- ISSN
- 1087-9870 (ISSN-L)
- OpenAlex
- W2118672835
- Cited by
- 184
- References
- 1
- FWCI
- 16.56
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal interface materials for power electronics applications. https://app.cochat.ai/papers/10.1109/itherm.2008.4544297
- The paper
- Narumanchi, S., Mihalic, M., Kelly, K., & Eesley, G. (2008). Thermal interface materials for power electronics applications. 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems. https://doi.org/10.1109/itherm.2008.4544297
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.