Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 36 of the 37 references it cites were found in a registry or an index.

Power-Loss Analysis and Efficiency Maximization of a Silicon-Carbide MOSFET-Based Three-Phase 10-kW Bidirectional EV Charger Using Variable-DC-Bus Control

Wang, Xuntuo, Jiang, Chenguang, Lei, Bo, Teng, Hui, Bai, Hua Kevin, Kirtley, James L. · 2016 · IEEE Journal of Emerging and Selected Topics in Power Electronics

Abstract

It is expected that wide-bandgap devices like silicon-carbide MOSFETs and gallium-nitride HEMTs could replace Si devices in power electronics converters to reach higher system efficiency. This paper adopts the conventional half-bridge LLC topology to realize a 10-kW all-SiC bidirectional charger used in electric vehicles. Though it is a well-known topology for the unidirectional charger, it has not been comprehensively explored for the bidirectional energy flow yet. A double-pulse-test (DPT) platform is utilized to provide accurate power losses. A state-space model is built to obtain accurate switching current waveforms, which is eventually combined with the DPT results to accurately predict the system efficiency. Based on this model, to further enhance the system efficiency, the dc-bus voltage is varied with LLC dc/dc converter running at the resonant frequency through the whole power range. Experimental results validated that the proposed approach could realize the bidirectional power flow. By varying the dc-bus voltage, the V2G and G2V modes reach ~96 % wall-to-battery efficiency.

Overview

Integrity signals

Registry

Crossref · 10.1109/jestpe.2016.2575921

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 1

  1. kim, 2014, Multifunctional onboard battery charger for plug-in electric vehicles, IEEE Trans Ind Electron, 62, 3460

Cited by

See all 108

Metadata

Authors
Wang, X., Jiang, C., Lei, B., Teng, H., Bai, H. K., & Kirtley, J. L.
Affiliations
  • Massachusetts Institute of Technology (US)
  • Kettering University (US)
Venue
IEEE Journal of Emerging and Selected Topics in Power Electronics
Published
2016-09
Volume
4
Issue
3
Pages
880-892
ISSN
  • 2168-6777 (ISSN-L)
  • 2168-6785
OpenAlex
W2413137474
Cited by
107
References
37
Citations by year
2026: 2 · 2025: 7 · 2024: 8 · 2023: 17 · 2022: 9 · 2021: 12 · 2020: 12 · 2019: 15 · 2018: 16 · 2017: 8 · 2016: 1
FWCI
6.15
Type
journal article
Language
en
Open access
closed
Locations
  • IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
  • Cambridge University Engineering Department Publications Database (submittedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
Keywords
SiC MOSFET, three-phase inverter, power loss analysis, double pulse test, state-space model, efficiency optimization, vehicle-to-grid, grid-to-vehicle, wide bandgap power devices

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.