Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 339

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

An Untethered, Electrostatic, Globally Controllable MEMS Micro-Robot

Donald, B.R., Levey, C.G., McGray, C.D., Paprotny, I., Rus, D.·2006·Journal of Microelectromechanical Systems

Abstract

We present an untethered, electrostatic, MEMS micro-robot, with dimensions of 60 /spl mu/m by 250 /spl mu/m by 10 /spl mu/m. The device consists of a curved, cantilevered steering arm, mounted on an untethered scratch drive actuator (USDA). These two components are fabricated monolithically from the same sheet of conductive polysilicon, and receive a common power and control signal through a capacitive coupling with an underlying electrical grid. All locations on the grid receive the same power and control signal, so that the devices can be operated without knowledge of their position on the substrate. Individual control of the component actuators provides two distinct motion gaits (forward motion and turning), which together allow full coverage of a planar workspace. These MEMS micro-robots demonstrate turning error of less than 3.7/spl deg//mm during forward motion, turn with radii as small as 176 /spl mu/m, and achieve speeds of over 200 /spl mu/m/sec with an average step size as small as 12 nm. They have been shown to operate open-loop for distances exceeding 35 cm without failure, and can be controlled through teleoperation to navigate complex paths. The devices were fabricated through a multiuser surface micromachining process, and were postprocessed to add a patterned layer of tensile chromium, which curls the steering arms upward. After sacrificial release, the devices were transferred with a vacuum microprobe to the electrical grid for testing. This grid consists of a silicon substrate coated with 13-/spl mu/m microfabricated electrodes, arranged in an interdigitated fashion with 2-/spl mu/m spaces. The electrodes are insulated by a layer of electron-beam-evaporated zirconium dioxide, so that devices placed on top of the electrodes will experience an electrostatic force in response to an applied voltage. Control waveforms are broadcast to the device through the capacitive power coupling, and are decoded by the electromechanical response of the device body. Hysteresis in the system allows on-board storage of n=2 bits of state information in response to these electrical signals. The presence of on-board state information within the device itself allows each of the two device subsystems (USDA and steering arm) to be individually addressed and controlled. We describe this communication and control strategy and show necessary and sufficient conditions for voltage-selective actuation of all 2/sup n/ system states, both for our devices (n=2), and for the more general case (where n is larger.).

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/jmems.2005.863697

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 7 references

Cited by

See all 339

Metadata

Authors
Donald, B. R., Levey, C. G., McGray, C. D., Paprotny, I., & Rus, D.
Venue
Journal of Microelectromechanical Systems
Published
2006-02
Volume
15
Issue
1
Pages
1-15
ISSN
1057-7157 (ISSN-L)
OpenAlex
W2047706052
Cited by
339
References
7
FWCI
18.89
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: An Untethered, Electrostatic, Globally Controllable MEMS Micro-Robot. https://app.cochat.ai/papers/10.1109/jmems.2005.863697
The paper
Donald, B. R., Levey, C. G., McGray, C. D., Paprotny, I., & Rus, D. (2006). An Untethered, Electrostatic, Globally Controllable MEMS Micro-Robot. Journal of Microelectromechanical Systems. https://doi.org/10.1109/jmems.2005.863697

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.