CoChat

Harvesting Energy From a Rotating Gear Using an AFM-Like MEMS Piezoelectric Frequency Up-Converting Energy Harvester

Open access
Janphuang, Pattanaphong, Lockhart, Robert A., Isarakorn, Don, Henein, Simon, Briand, Danick, de Rooij, Nico F. · 2015 · Journal of Microelectromechanical Systems
Cited by 72

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

This paper presents an analytical and experimental study of a compact configuration to harvest energy from a rotating gear using piezoelectric microelectromechanical system harvesters. The reported configuration realizes a contact-type frequency up-conversion mechanism in order to generate useful electrical energy. The up-conversion mechanism was achieved using an atomic force microscope (AFM)-like piezoelectric cantilever plucked by the teeth of the rotating gear that could be eventually driven by an oscillating mass. This paper describes relevant design guidelines for harvesting energy from the low-frequency mechanical movement of a rotating gear through analytical modeling and finite element method (FEM) simulation followed by experimental validation. Different harvester configurations are investigated to identify the optimal configuration in terms of the output energy and energy conversion efficiency. The latter results are reported for the first time because of the implementation of an original concept based on the coupling of the harvester with a rotational flywheel. The experimental results reveal that free vibrations of the harvester after plucking contribute significantly to the output energy and efficiency. By adding a proof mass, the efficiency of the system can be greatly improved. For plucking speeds between 3 and 19 r/s, average output powers in the order of tens of microwatts were obtained for continuous plucking. By combining interaction energy, friction, and energy absorption, between the harvester and inertial mass, the maximum efficiency of the impact piezoelectric harvesters was found to be 1.4%. The efficiency results obtained were compared with the noncontact magnetic plucking approach further demonstrating the potential of our concept. Finally, different tip-gear materials combinations were evaluated showing the importance of their nature on the reliability of the presented configuration.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/jmems.2014.2349794

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 72

Metadata

Authors
Janphuang, P., Lockhart, R. A., Isarakorn, D., Henein, S., Briand, D., & de Rooij, N. F.
Venue
Journal of Microelectromechanical Systems
Published
2015-06
Volume
24
Issue
3
Pages
742-754
ISSN
  • 1057-7157 (ISSN-L)
  • 1941-0158
OpenAlex
W2105501723
Cited by
72
References
2
FWCI
1.95
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.