The DOI matches its Crossref record.
SiC and GaN transistors - is there one winner for microwave power applications?
Abstract
Wide bandgap semiconductors show promise for high-power microwave electronic devices. Primarily due to low breakdown voltage, it has not been possible to design and fabricate solid-state transistors that can yield radio-frequency (RF) output power on the order of hundreds to thousands of watts. This has severely limited their use in power applications. Recent improvements in the growth of wide bandgap semiconductor materials, such as SiC and the GaN-based alloys, provide the opportunity to now design and fabricate microwave transistors that demonstrate performance previously available only from microwave tubes. The most promising electronic devices for fabrication in wide bandgap semiconductors for these applications are metal-semiconductor field-effect transistors (MESFETs) fabricated from the 4H-SiC polytype and heterojunction field-effect transistors (HFETs) fabricated using the AlGaN/GaN heterojunction. These devices can provide RF output power on the order of 5-6 W/mm and 10-12 W/mm of gate periphery, respectively. 4H-SiC MESFETs should produce useful performance at least through X band and AlGaN/GaN HFETs should produce useful performance well into the millimeter-wave region, and potentially as high as 100 GHz.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wide-bandgap semiconductor materials: For their full bloom
Fujita, S. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.030101 · Cited by 383
Silicon carbide and diamond for high temperature device applications
Willander, M., Friesel, M., Wahab, Q.-U., & Straumal, B. (2006) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-005-5137-4 · Cited by 292
Thermal boundary conductance across metal-gallium nitride interfaces from 80 to 450 K
Donovan, B. F., Szwejkowski, C. J., Duda, J. C., Cheaito, R., Gaskins, J. T., Peter Yang, C.-Y., Constantin, C., Jones, R. E., & Hopkins, P. E. (2014) · Applied Physics Letters · doi:10.1063/1.4902233 · Cited by 72
Dynamic performances of GaN-HEMT on Si in cascode configuration
Hirose, T., Imai, M., Joshin, K., Watanabe, K., Ogino, T., Miyazaki, Y., Shono, K., Hosoda, T., & Asai, Y. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803306 · Cited by 38
Metadata
- Authors
- Trew, R. J.
- Venue
- Proceedings of the IEEE
- Published
- 2002-06
- Volume
- 90
- Issue
- 6
- Pages
- 1032-1047
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2114895010
- Cited by
- 216
- References
- 0
- FWCI
- 8.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.