The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles
Abstract
This paper reviews the relative merits of induction, switched reluctance, and permanent-magnet (PM) brushless machines and drives for application in electric, hybrid, and fuel cell vehicles, with particular emphasis on PM brushless machines. The basic operational characteristics and design requirements, viz. a high torque/power density, high efficiency over a wide operating range, and a high maximum speed capability, as well as the latest developments, are described. Permanent-magnet brushless dc and ac machines and drives are compared in terms of their constant torque and constant power capabilities, and various PM machine topologies and their performance are reviewed. Finally, methods for enhancing the PM excitation torque and reluctance torque components and, thereby, improving the torque and power capability, are described
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vector Control and Dynamics of AC Drives
Novotny, D. W., & Lipo, T. A. (1996) · doi:10.1093/oso/9780198564393.001.0001 · Cited by 1,841
Switched Reluctance Motors and Their Control
Miller, T. J. E. (1993) · Medical Entomology and Zoology · Cited by 1,300
The state of the art of electric and hybrid vehicles
Chan, C. C. (2002) · Proceedings of the IEEE · doi:10.1109/5.989873 · Cited by 1,100
Synthesis of high performance PM motors with concentrated windings
Cros, J., & Viarouge, P. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2002.1009476 · Cited by 667
Propulsion system design of electric and hybrid vehicles
Ehsani, M., Rahman, K. M., & Toliyat, H. A. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.557495 · Cited by 443
Optimal Flux Weakening in Surface PM Machines Using Fractional-Slot Concentrated Windings
EL-Refaie, A. M., & Jahns, T. M. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.847312 · Cited by 400
Halbach permanent magnet machines andapplications: a review
Zhu, Z. Q., & Howe, D. (2001) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20010479 · Cited by 383
Self-citationSynchronous Reluctance Machines-A Viable Alternative for AC Drives?
Lipo, T. A. (1991) · Electric Machines & Power Systems · doi:10.1080/07313569108909556 · Cited by 333
Rotor loss in permanent-magnet brushless AC machines
Stone, D. A., Mellor, P. H., Howe, D., & Atallah, K. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.887213 · Cited by 326
Self-citationSchiferl, R. F., & Lipo, T. A. (1990) · IEEE Transactions on Industry Applications · doi:10.1109/28.52682 · Cited by 318
Schiferl, R., & Lipo, T. A. (2003) · Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1988.25037 · Cited by 311
Rotor loss in permanent magnet brushless AC machines
Atallah, K., Howe, D., Mellor, P. H., & Stone, D. A. (2003) · IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272) · doi:10.1109/iemdc.1999.769027 · Cited by 308
Self-citationA high-performance inverter-fed drive system of an interior permanent magnet synchronous machine
Bose, B. K. (1988) · IEEE Transactions on Industry Applications · doi:10.1109/28.17470 · Cited by 293
Making the case for applications of switched reluctance motor technology in automotive products
Krishnamurthy, M., Edrington, C. S., Emadi, A., Asadi, P., Ehsani, M., & Fahimi, B. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872371 · Cited by 242
Comparison of PM brushless motors, having either all teeth or alternate teeth wound
Ishak, D., Zhu, Z. Q., & Howe, D. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.853765 · Cited by 231
Self-citationPermanent-Magnet Brushless Machines With Unequal Tooth Widths and Similar Slot and Pole Numbers
Ishak, D., Zhu, Z. Q., & Howe, D. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.844380 · Cited by 195
Self-citationPerformance of interior permanent magnet motor drive over wide speed range
Uddin, M. N., Radwan, T. S., & Rahman, M. A. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/60.986441 · Cited by 185
Jahns, T. M., & Caliskan, V. A. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.806049 · Cited by 147
Performance of Interior Permanent Magnet Motor Drive over Wide Speed Range
Uddin, M. N., Radwan, T. S., & Rahman, M. A. (2002) · IEEE Power Engineering Review · doi:10.1109/mper.2002.4311984 · Cited by 117
Honda, Y., Nakamura, T., Higaki, T., & Takeda, Y. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1997.643011 · Cited by 92
Uncontrolled Generation in Interior Permanent-Magnet Machines
Liaw, C.-Z., Soong, W. L., Welchko, B. A., et al. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.851557 · Cited by 49
Performance of halbach magnetized brushless ac motors
Zhu, Z. Q., Xia, Z. P., Shi, Y. F., Howe, D., Pride, A., & Chen, X. J. (2003) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2003.816717 · Cited by 44
Self-citationAcoustic noise radiated from directtorque controlled induction motor drives
Xu, L., Zhu, Z. Q., & Howe, D. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000582 · Cited by 30
Self-citation
Cited by
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
Chau, K. T., Chan, C. C., & Liu, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918403 · Cited by 1,496
Liu, C., Chau, K. T., Wu, D., & Gao, S. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2271951 · Cited by 917
The rise of electric vehicles—2020 status and future expectations
Muratori, M., Alexander, M., Arent, D., Bazilian, M., Cazzola, P., Dede, E. M., Farrell, J., Gearhart, C., Greene, D., Jenn, A., et al. (2021) · Progress in Energy · doi:10.1088/2516-1083/abe0ad · Cited by 456
Bostanci, E., Moallem, M., Parsapour, A., & Fahimi, B. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2649883 · Cited by 430
A comprehensive review on hybrid electric vehicles: architectures and components
Singh, K. V., Bansal, H. O., & Singh, D. (2019) · Journal of Modern Transportation · doi:10.1007/s40534-019-0184-3 · Cited by 357
Metadata
- Authors
- Zhu, Z. Q., & Howe, D.
- Venue
- Proceedings of the IEEE
- Published
- 2007-04
- Volume
- 95
- Issue
- 4
- Pages
- 746-765
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2037600830
- Cited by
- 1,547
- References
- 23
- FWCI
- 25.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.