Wearable Inertial Sensors for Human Motion Analysis: A Review
The DOI matches its Crossref record; 82 of the 83 references it cites were found in a registry or an index.
Abstract
This paper reviews the research literature on human motion analysis using inertial sensors with the aim to find out: which configuration of sensors have been used to measure human motion; which algorithms have been implemented to estimate position and orientation of segments and joints of human body; how the performance of the proposed systems has been evaluated; and what is the target population with which the proposed systems have been assessed. These questions were used to revise the current state-of-the-art and suggest future directions in the development of systems to estimate human motion. A search of literature was conducted on eight Internet databases and includes medical literature: PubMed and ScienceDirect; technical literature: IEEE Xplore and ACM Digital Library; and all-science literature: Scopus, Web of Science, Taylor and Francis Online, and Wiley Online Library. A total of 880 studies were reviewed based on the criteria for inclusion/exclusion. After the screening and full review stages, 37 papers were selected for the review analysis. According to the review analysis, most studies focus on calculating the orientation or position of certain joints of the human body, such as elbow or knee. There are only three works that estimate position or orientation of both, upper and lower limbs simultaneously. Regarding the configuration of the experiments, the mean age of the test subjects is 26.2 years (± 3.7), indicating a clear trend to test the systems and methods using mainly young people. Other population groups, such as people with mobility problems, have not been considered in tests so far. Human motion analysis is relevant for obtaining a quantitative assessment of motion parameters of people. This assessment is crucial for, among others, healthcare applications, monitoring of neuromuscular impairments, and activity recognition. There is a growing interest for developing technologies and methods for enabling human motion analysis, ranging from specialized in situ systems to low-cost wearable systems.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Assessment of Older People: Self-Maintaining and Instrumental Activities of Daily Living
Lawton, M. P., & Brody, E. M. (1969) · The Gerontologist · doi:10.1093/geront/9.3_part_1.179 · Cited by 18,540
Wu, G., van der Helm, F. C. T., (DirkJan) Veeger, H. E. J., Makhsous, M., Van Roy, P., Anglin, C., Nagels, J., Karduna, A. R., McQuade, K., Wang, X., et al. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.05.042 · Cited by 4,558
Wu, G., Siegler, S., Allard, P., Kirtley, C., Leardini, A., Rosenbaum, D., Whittle, M., D’Lima, D. D., Cristofolini, L., Witte, H., et al. (2002) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00222-6 · Cited by 3,242
Measurement of lower extremity kinematics during level walking
Kadaba, M. P., Ramakrishnan, H. K., & Wootten, M. E. (1990) · Journal of Orthopaedic Research · doi:10.1002/jor.1100080310 · Cited by 3,216 · cited 1×
“The second dimension refers to the motion description of body segments, that are modelled as rigid bodies, such as forearm or upper arm [71], or motion description of body joints”
BackgroundA review of wearable sensors and systems with application in rehabilitation
Patel, S., Park, H., Bonato, P., Chan, L., & Rodgers, M. (2012) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/1743-0003-9-21 · Cited by 2,396
A Survey on Wearable Sensor-Based Systems for Health Monitoring and Prognosis
Pantelopoulos, A., & Bourbakis, N. G. (2010) · IEEE Transactions on Systems Man and Cybernetics Part C (Applications and Reviews) · doi:10.1109/tsmcc.2009.2032660 · Cited by 2,296
Mitra, S., & Acharya, T. (2007) · IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2007.893280 · Cited by 1,981
Wireless sensor networks for healthcare: A survey
Alemdar, H., & Ersoy, C. (2010) · Computer Networks · doi:10.1016/j.comnet.2010.05.003 · Cited by 1,427
Wearable Sensors for Human Activity Monitoring: A Review
Mukhopadhyay, S. C. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2370945 · Cited by 1,401
Human motion tracking for rehabilitation-A survey
Zhou, H., & Hu, H. (2008) · Biomedical Signal Processing and Control · doi:10.1016/j.bspc.2007.09.001 · Cited by 813
Research works printed but not linked: 4
- simon, 2001, Kalman filtering, Embedded Syst Program, 14, 72
- inman, 1981, Human Walking
- davis, 2002, Clinical Gait Analysis and Its Role in Treatment Decision-Making, 1
- lópez-nava, 2015, Automatic measurement of pronation/supination, flexion/extension and abduction/adduction motion of human limbs using wearable inertial and magnetic sensors, in Proceedings of the 4th Int'l Conf on Global Health Challenges IARIA, 55
Cited by
Items 201–263 of 263
Ukasi, S., Hajra, S., Kim, H. J., Sriphan, S., Pongampai, S., Charoonsuk, T., & Vittayakorn, N. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.71380 · Cited by 1
“IMU was utilized for upper body mobility assessment, daily-life activity monitoring, and tremor assessment [69].”
Kumpán, P. (2017) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-65960-2_62 · Cited by 1
Lateral differences of the forearm range of motion
Sánchez-Arce, I. J., Walmsley, A., Fahad, M., & Durazo-Romero, E. S. (2020) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411920904597 · Cited by 1
Martínez-Hernández, U., & Rubio-Solis, A. (2021) · IEEE RO-MAN · doi:10.1109/ro-man50785.2021.9515395 · Cited by 1
“In recent years, wearable assistive robots have shown rapid improvements in the materials and sensors employed in their design and development [6], [7], [8], [9].”
BackgroundHuman Activity Recognition based on Smartphone Sensors- A Comparative Study
Dhammi, L., & Tewari, P. (2021) · International Conference on Reliability, Infocom Technologies and Optimization (Trends and Future Directions) (ICRITO) · doi:10.1109/icrito51393.2021.9596305 · Cited by 1
Unsupervised 3D Keypoint Discovery with Multi-View Geometry
Honari, S., Zhao, C., Salzmann, M., & Fua, P. (2024) · International Conference on 3D Vision (3DV) · doi:10.1109/3dv62453.2024.00157 · Cited by 2
“The 3D labels are obtained either through marker-based motion capturing [17, 39], wearable inertial-based tracking [29, 31], or marker-less capturing systems [8, 24, 33].”
Development of Intelligent Workout Environment for VR Devices
Aslanyan, M. (2024) · IEEE Global Engineering Education Conference (EDUCON) · doi:10.1109/educon60312.2024.10578849 · Cited by 1
“This type of solution is portable, low-cost and easy to implement as it consists of small components [4, 5].”
BackgroundMethodWearable Technologies in Rehabilitation
Mustafaoğlu, R. (2024) · doi:10.69860/nobel.9786053359418.17 · Cited by 1
Future directions in clinical application of gait, balance and mobility analysis
Mason, R., Tait, P., Morris, R., & Stuart, S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-21484-4.00017-x · Cited by 1
Equimetrics - Applying HAR Principles to Equestrian Activities
Pöhler, J., & Laerhoven, K. V. (2025) · Lecture notes in computer science · doi:10.1007/978-3-031-80856-2_5 · Cited by 1
“Humanactivity recognition research has explored the potential of wearable inertial sensors to track and analyze complex movements, with applications in healthcare, sports, and other domains [13] [12] [5] [15].”
BackgroundA Multi-Featured Analysis for Body Sensor Networks-based Affective Actions Recognition
Wang, Z., Yang, N., Zhao, H., Shi, X., Qiu, S., & Wang, Z. (2019) · International Conference on Computer Supported Cooperative Work in Design (CSCWD) · doi:10.1109/cscwd.2019.8791920 · Cited by 1
“are principally intended for indoor use [8], and may cause partial occlusion of body parts [9] [10].”
BackgroundMeyer, J., Klitzke, L., & von Cölln, G. (2019) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin41052.2019.8972227 · Cited by 1
“combination of gyroscope, accelerometer and geomagnetic sensor (sensor fusion) [5].”
BackgroundMagnetometer-Free IMU-Based Joint Axis Calibration and Estimation
Ju, L., Shi, D., Mo, L., Shi, Y., & Zhang, W. (2021) · IEEE International Conference on Robotics and Biomimetics (ROBIO) · doi:10.1109/robio54168.2021.9739334 · Cited by 1
Andreoni, G., Cassiolas, G., Standoli, C. E., Lenzi, S. E., Perego, P., & Lopomo, N. F. (2022) · Lecture notes in computer science · doi:10.1007/978-3-031-06018-2_10 · Cited by 2
Monitoring in Football and Field Hockey: The Potential of IMUs in Human Motion Analysis
Wilmes, E. (2023) · doi:10.5463/thesis.215 · Cited by 2
Intelligent Single IMU Sensor Module for Gait Temporal Parameter EstimationPreprint
Bhongade, A., Gupta, R., Gandhi, T. K., & Prathosh, A. P. (2024) · doi:10.36227/techrxiv.171328709.99181383/v1 · Cited by 1
Human motion data expansion from arbitrary sparse sensors with shallow recurrent decodersPreprint
Ebers, M. R., Pitts, M. N., Kutz, J. N., & Steele, K. M. (2024) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2024.06.01.596487 · Cited by 3
“For example, IMUs are widely used in wearable devices and have immense promise for motion sensing [15]–[19].”
BackgroundUpper limb prostheses control based on user's body compensations
Legrand, M. L. (2021) · theses.fr (ABES) · doi:10.70675/ed6006b7zd285z46deza981zccb011324956 · Cited by 6
Experimental evaluation of SAPC-R: an adaptive power control protocol for mobile sensors
Basu, D., Gupta, G. S., Zhang, Y., Nag, A., & Doyle, L. (2018) · International Symposium on Networks, Computers and Communications (ISNCC) · doi:10.1109/isncc.2018.8531046
“There are a few examples in [3], [4] that show the tremendous growth potentials of the use of wearable sensors that will address the growing cost of in-house”
BackgroundVelásquez, W. (2019) · UPM Digital Archive (Technical University of Madrid) · doi:10.20868/upm.thesis.56279 · Cited by 1
Quantitative Analysis of Engineer’s Skill Using Wearable Sensor Data while Inspecting Highway Bridge
Suzuki, G., Maeda, K., Ogawa, T., & Haseyama, M. (2020) · IEEE Global Conference on Life Sciences and Technologies (LifeTech) · doi:10.1109/lifetech48969.2020.1570619234
“Recently, human behavior has been quantified by using various wearable sensors [3], [4].”
BackgroundHodgins, A. (2020) · QSpace (Queen's University Library)
Customized UHF RFID Sensor Tags to Feed Biomechanical Models
Colella, R., Tumolo, M. R., Sabina, S., Leo, C. G., Mincarone, P., Guarino, R., & Catarinucci, L. (2021) · International Conference on Smart and Sustainable Technologies (SpliTech) · doi:10.23919/splitech52315.2021.9566343
Multisensor Wearable Device for Monitoring Vital Signs and Physical Activity 1
Tocco, J. D., Raiano, L., Presti, D. L., Massaroni, C., Formica, D., & Schena, E. (2023) · Wiley eBooks · doi:10.1002/9781119863663.ch30
Effects of bandaging techniques and shot types on wrist motion in boxing
Gatt, I. T. (2023) · Sheffield Hallam University · doi:10.7190/shu-thesis-00559 · Cited by 3
Adjel, M., Dumas, R., Mohammed, S., & Bonnet, V. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4668095
ICGNN Model for Fall Detection Using Inertial Sensors
Cao, Y., Guo, M., Sun, X., Chen, X., Qiu, J., & Sun, J. (2023) · International Conference on New Trends in Computational Intelligence (NTCI) · doi:10.1109/ntci60157.2023.10403720
“For each action sample, the collected raw data will inevitably be interfered with by noise, including external interference from within the sensor device and during transmission [17].”
BackgroundLow-cost IMU-based motion capture system and pneumatic exoskeleton design for assistive applications
Chen, Y. (2024) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/179556
Human Activity Recognition with Dual-Stream Residual Network based on Wearable Devices
Zhang, Q., Hu, D., Jiang, T., & Gao, F. (2024) · International Conference on Pattern Recognition and Artificial Intelligence (PRAI) · doi:10.1109/prai62207.2024.10827529
Elnaggar, O., Paoletti, P., Hopkinson, A., & Coenen, F. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-22206-1.00004-8 · Cited by 1
Personalised healthcare and exercise rehabilitation based on upper-limb metrics
Wang, H., Wang, Y., He, Z., Li, X., & Yao, Y. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.110673 · Cited by 2
Yoshida, T., Uehara, S., Hirano, A., Itoh, S., & Otaka, Y. (2025) · medRxiv · doi:10.1101/2025.04.24.25326137
“This may be due to the lack of user-friendly applications for analysis in rehabilitation settings and/or the limited availability of devices that can measure the upper and lower limb joint angles using a single measurement system (21).”
Human Activity Recognition Model Based on the Fusion of Capsule-Transformer
王, 星. (2025) · Modeling and Simulation · doi:10.12677/mos.2025.145466
Smart Vest for Physical Education (SV4PE): Physical Assessment Metrics via IMU and ECG
Argueta, L. R., Aguiar, R. C., Oliveira, S., Sousa, M. V., Carvalho, D., & Correia, M. V. (2025) · IEEE International Symposium on Medical Measurements and Applications (MeMeA) · doi:10.1109/memea65319.2025.11066295 · Cited by 1
“Wearable systems, using Inertial Measurement Units (IMUs), combine accelerometers, gyroscopes, and occasionally mag-netometers, offering a practical ”middle ground” for motion analysis, capturing sufficiently detailed movement data in a portable, affordable and unobtrusive manner [3].”
Development of a Low-Cost and Wearable Accelerometer-Based System for Motion Monitoring
Stella, C. S., Bertotti, F. L., & da Silveira, A. L. F. (2025) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-031-93646-3_84
A Resistive Lower-Limb Exoskeleton for Fitness - Enhancing Metabolic Expenditure
Wang, G., Yu, S., Guo, Y., & Fu, C. (2025) · IEEE International Conference on Mechatronics and Automation (ICMA) · doi:10.1109/icma65362.2025.11120637
“Incorporating a gait recognition system using devices such as inertial measurement units (IMUs) could capture gait information[13], enabling dynamic force adjustments tailored to the partic-ipant’s movements and attributes, enhancing group muscle engagement and metabolic expenditure[14].”
Characterization of Multiple Sensors to Operate a Bionic Joint for Rehabilitation Applications
Swaminathan, S., Santhosh, P., & Zaidi, S. (2025) · IEEE Integrated STEM Education Conference (ISEC) · doi:10.1109/isec64801.2025.11147335
“To narrow the number of useful sensors down, numerous sources were referenced to grasp the number of adequate sensors for experimental purposes, which resulted in the usage of three sensors [6] on the muscles Biceps femoris , the Gastrocnemius lateralis , and the Tibialis anterior .”
Real-Time Motion Tracking and Analysis of Kendo Based on High-Speed Cameras
Xu, G., Wang, L., Huang, S., Yang, G., Wang, Q., & Zhou, C. (2025) · International Conference on Intelligent Robotics and Control Engineering (IRCE) · doi:10.1109/irce66030.2025.11203113
“Traditional motion tracking methods often use wearable sensors, which may interfere with the natural movements of athletes, while manual video analysis is inefficient and fails to meet Kendo’s demands for high-speed and high-precision feedback [1] [2].”
A Real-Time Error-Compensated Multisensor Acquisition System for Marine Geotechnical Investigation
Ku, S.-B., Jung, H., Cho, H., Oh, J., Kim, J.-U., Lee, J., Cho, S., Won, J., Park, J., Choo, H., et al. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3628740
“In addition, the platform acquires three-axis accelerometers ( a x , a y , and a z ) [22], [23], [24], three-axis gyroscopes ( g x , g y , and g z ) [25], [26], penetration angles ( θ pitch and θ roll ) [27], [28], and thermocouple ( t c ) [29] and barometer ( b p ) [30], [31], [32].”
Feng, Y., Sang, C., Tian, L. F., Wang, Z., Dong, F., Wang, F., & Wang, H. (2025) · Healthcare Technology Letters · doi:10.1049/htl2.70029
Using deep networks for knee range of motion monitoring in total knee arthroplasty rehabilitation
Zhang, Y., Wang, Q., Yang, T., Wang, J., Yin, H., Wang, L., & Liu, J. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1691591
“Systems using inertial and optical markers provide high measurement accuracy but are associated with high costs and time consumption (López-Nava and Muñoz-Meléndez, 2016; van der Straaten et al., 2018; Wagner, 2018; Fong and Chan, 2010; Filippeschi et al., 2017).”
Zaeni, I. A. E., Lestari, D., Mustika, S. N., Anzani, D. R., Osman, M. K., & Ahmad, K. A. (2025) · International Conference on Smart-Green Technology in Electrical and Information Systems (ICSGTEIS) · doi:10.1109/icsgteis68532.2025.11284340
“IMUs has capability to provide real-time feedback that make them useful for continuous monitoring, both in clinical settings and daily activity [9].”
Wang, T., & Zhao, Y. (2025) · AKCE International Journal of Graphs and Combinatorics · doi:10.1080/09728600.2025.2598770
Performance Study of MEMS Quad Mass Gyroscope Based on Force Balance Closed-Loop DC Bias Voltage
Cao, L., & Zhou, Y. (2025) · IEEE International Conference on Electronic Measurement & Instruments · doi:10.1109/icemi66537.2025.11306499
Towards Reliable Human Activity Recognition: A Deep Learning Approach with VGG16 Feature Extraction
Goel, A., & Gupta, B. K. (2025) · International Conference on Electrical, Electronics, Communication and Computers (ELEXCOM) · doi:10.1109/elexcom67950.2025.11451653
“The deep learning model is designed for accurate classification of activities using spatio-temporal features [14] as shown in Figure 1.”
Simonetti, E. (2020) · theses.fr (ABES) · doi:10.70675/280b8108ze479z4fd4zab45z68c8566a363f · Cited by 1
Vallejo, I. F., López‐Castromán, J., Lenggenhager, B., Segura, E. M., & Tajadura‐Jiménez, A. (2026) · CHI Conference Extended Abstracts on Human Factors in Computing Systems (CHI EA) · doi:10.1145/3772363.3799345
Kabiesz, P., Płaza, G. A., Gheibi, M., & Żukrowska, M. (2026) · Foods · doi:10.3390/foods15101716
Choi, W., Kim, S., & Choi, M. (2026) · International Conference on Control Engineering and Artificial Intelligence (CCEAI) · doi:10.1145/3793928.3793936
Extraction and Analysis of Kinematic Characteristics of Dance Movements Based on Inertial Sensors
Cui, W. (2026) · Textile & Leather Review · doi:10.31881/tlr.2026.3338
Development of Shinai-Embedded IMU-Based Sensing System for Motion Analysis of Kendo Swings
Ogai, Y., & Sanekata, M. (2026) · Sensors · doi:10.3390/s26113356
Constantin, A., Badea, C. R., Nechita, R.-M., Dumitrescu, C.-I., Verdete, B.-M., Badea, F., & Badea, S. I. (2026) · Biomimetics · doi:10.3390/biomimetics11060386
Thornton, C. J., Tada, M., & Maruyama, T. (2026) · Communications in computer and information science · doi:10.1007/978-3-032-30819-1_67
Dreveton, J., Labetzsch, M., Gocke, T., & Bertram, T. (2026) · Sensors · doi:10.3390/s26144469
Application-Oriented In-Cabin Human Pose Estimation With Six Wearable IMUs and Sensor-Aware Training
Natale, T., Ndozi, F., Russo, F., Polonelli, T., Dindelli, L., Dell’Olio, F., & Magno, M. (2026) · IEEE Sensors Journal · doi:10.1109/jsen.2026.3711871
Design and development of a multisensor wearable system for human limb motion monitoring
Kurmangazy, M., Maksut, A., Dauren, B., Zhetenbayev, N., & Nurgizat, Y. (2026) · Vibroengineering PROCEDIA · doi:10.21595/vp.2026.26453
“Musculoskeletal disorders and injuries often lead to reduced mobility, which creates a need for reliable methods to monitor and restore movement [1-3].”
Zuo, J., Peng, X., Sun, X., & Wang, Q. (2026) · IEEE Sensors Journal · doi:10.1109/jsen.2026.3712390
“On the other hand, simply increasing the number of sensors may improve feature diversity, but it also increases system burden, deployment complexity, and user inconvenience [1], [3], [13].”
InfluentialAlanazi, M., Alsharif, B., Altaher, A. S., Altaher, A., & Ilyas, M. (2026) · Franklin Open · doi:10.1016/j.fraope.2026.100728
Gu, C., Chen, J., Yang, T. Q., Ma, B., & Konomi, S. (2026) · IEEE Transactions on Computational Social Systems · doi:10.1109/tcss.2026.3716220
“To reduce noise and ensure temporal alignment across modalities [48], we resampled the motion data to a stable 20 Hz and downsampled the ECG data to 50 Hz for consistency across features.”
Becerra-Patiño, B. A., Peñuela-Arguello, M. A., Zapata-Piratova, C. D., Montenegro-Bonilla, A. D., Sepulveda, R. A. Y., López‐Gil, J. F., & Pino‐Ortega, J. (2026) · Sensors · doi:10.3390/s26165027
“…standards for validating do-it-yourself (DIY) devices, the limited reporting of calibration and synchronization procedures, insufficient sample sizes in validation studies, and the lack of open and well-documented datasets that allow for reproducibility and comparison between studies [14].”
IMU- and Vision-Based Measurement Techniques for Joint Kinematics: A Narrative Review
Ceriola, L., Molinaro, L., Taborri, J., Patanè, F., & Mileti, I. (2026) · Sensors · doi:10.3390/s26165063
“These discrepancies are systematically driven by the accumulation of integration drift, magnetic disturbances, un-compensated soft-tissue artifacts (STAs), and the inherent uncertainty in sensor-to-segment (S2S) calibration methodologies [9,59].”
A Conceptual Framework for Drift-Aware IMU-Based Gait Analysis Using Motion Capture References
Rezk, E. (2026) · Sensors · doi:10.3390/s26206657
“Synthetic IMU signals could be generated from reference trajectories by incorporating stochastic noise and slowly varying bias components representative of MEMS-based inertial sensing [18,19].”
Doro, B., Favro, F., Zen, F., Bullo, V., Mattioli, S., Navarin, N., Gobbo, S., & Bergamin, M. (2026) · La Medicina del Lavoro · doi:10.23749/mdl.2026.18921
“Wearable systems are also subject to calibration drift, interference from protective clothing, and long-term compliance challenges [23].”
Metadata
- Authors
- Lopez-Nava, I. H., & Munoz-Melendez, A.
- Venue
- IEEE Sensors Journal
- Published
- 2016-11
- Volume
- 16
- Issue
- 22
- Pages
- 7821-7834
- ISSN
- 1530-437X (ISSN-L)
- 1558-1748
- 2379-9153
- OpenAlex
- W2520936185
- Cited by
- 263
- References
- 83
- Citations by year
- 2026: 22 · 2025: 35 · 2024: 29 · 2023: 36 · 2022: 22 · 2021: 35 · 2020: 29 · 2019: 24 · 2018: 18 · 2017: 13
- FWCI
- 12.46
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Sensors Journal (publishedVersion)
- Funders
- Mexican National Council for Science and Technology, CONACYT (271539/224405)
- Topics
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Context-Aware Activity Recognition Systems
- Physical Sciences › Engineering › Aerospace Engineering › Inertial Sensor and Navigation
- Physical Sciences › Engineering › Biomedical Engineering › Gait Recognition and Analysis
- Keywords
- wearable inertial sensors, human motion analysis, joint position estimation, sensor configuration, activity recognition
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.