A Linear-Array Receiver Analog Front-End Circuit for Rotating Scanner LiDAR Application
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
A linear-array receiver analog front-end (AFE) circuit, which mainly consists of 16 transimpedance amplifiers (TIAs), is presented for pulsed time-of-flight (TOF) rotating scanner light detection and ranging (LiDAR) application. In particular, a single-channel TIA with a novel cascaded combination consists of a transimpedance preamplifier biased by a power supply of 1.8 V, a post amplifier (PA), and an output buffer (OB) with a 3.3-V power supply, aiming to lower the parasitic capacitance of the input stage and widen the output swing range, respectively. Meanwhile, the input-referred noise current is investigated to evaluate the detecting capability for the weak pulse current, and the crosstalk reduction schemes in circuit design and layout design are presented for the proposed AFE circuit. The proposed AFE circuit, which achieves a high gain of 100 dBΩ, a low gain of 60 dBΩ, a simulated transimpedance gain bandwidth of approximately 450 MHz, an equivalent input-referred noise current of 2.59 pA/Hz0.5, a signal-to-crosstalk ratio of 40.1 dB between adjacent channels, and a minimum detectable signal of 2.5 μA at SNR = 5, was fabricated in a 0.18-μm standard CMOS technology. The total area of AFE circuit, which includes the circuit core, bandgap and bias circuits, and I/O PAD, is approximately equal to 4.80 × 0.85 mm2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wideband Receiver for a Three-Dimensional Ranging LADAR System
Ngo, T.-H., Kim, C.-H., Kwon, Y. J., Ko, J. S., Kim, D.-B., & Park, H.-H. (2013) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2012.2215800 · Cited by 68 · cited 5×
“Secondly, compared with the single channel works [8], [17], the proposed TIA shows the some advantages, which include lower noise and power dissipation performance.”
BackgroundInfluentialA Linear-Mode LiDAR Sensor Using a Multi-Channel CMOS Transimpedance Amplifier Array
Hong, C., Kim, S.-H., Kim, J.-H., & Park, S. M. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2852794 · Cited by 64
Cited by
Mirrored Current-Conveyor Transimpedance Amplifier for Home Monitoring LiDAR Sensors
Yoon, D., Joo, J.-E., & Park, S. M. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2020.3043797 · Cited by 23
“For these purposes, a small, low-power, low-cost LiDAR sensor can be a feasible solution not only because its blurred images can easily avoid portrait right violation, but also because it can provide strong immunity against ambient RF interferences from electronic devices at home [9]–[14].”
BackgroundA CMOS AFE With 37-nA rms Input-Referred Noise and Marked 96-dB Timing DR for Pulsed LiDAR
Li, K., Guo, J., & Zhao, Y. (2022) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2022.3181133 · Cited by 14
“A single-stage inverting amplifier (M1, M2 and M3) is adopted as the core amplifier for the TIA, since the inverting amplifier-based TIA has excellent noise performance and large output swing [3], [5], [7], [11],”
BackgroundA Current-Mode Optoelectronic Receiver IC for Short-Range LiDAR Sensors in 180 nm CMOS
Hu, Y., Joo, J.-E., Zhang, X., Chon, Y., Choi, S., Lee, M.-J., & Park, S.-M. (2023) · Photonics · doi:10.3390/photonics10070746 · Cited by 6
A Low-Power Multimode Eight-Channel AFE for dToF LiDAR
Yang, Y., Liu, X., Yang, R., Ma, S., Xia, Y., Li, J., Zhang, B., Geng, L., & Li, D. (2024) · 2024 IEEE International Symposium on Circuits and Systems (ISCAS) · doi:10.1109/iscas58744.2024.10557862 · Cited by 5
A CMOS Integrator-Based Clock-Free Time-to-Digital Converter for Home-Monitoring LiDAR Sensors
He, Y., & Park, S. M. (2022) · Sensors · doi:10.3390/s22020554 · Cited by 5
Metadata
- Authors
- Zheng, H., Ma, R., Liu, M., & Zhu, Z.
- Venue
- IEEE Sensors Journal
- Published
- 2019-07-01
- Volume
- 19
- Issue
- 13
- Pages
- 5053-5061
- ISSN
- 1530-437X (ISSN-L)
- 1558-1748
- 2379-9153
- OpenAlex
- W2921115658
- Cited by
- 23
- References
- 2
- FWCI
- 2.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Linear-Array Receiver Analog Front-End Circuit for Rotating Scanner LiDAR Application. https://app.cochat.ai/papers/10.1109/jsen.2019.2905267
- The paper
- Zheng, H., Ma, R., Liu, M., & Zhu, Z. (2019). A Linear-Array Receiver Analog Front-End Circuit for Rotating Scanner LiDAR Application. IEEE Sensors Journal. https://doi.org/10.1109/jsen.2019.2905267
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.