The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
A 45 nm Resilient Microprocessor Core for Dynamic Variation Tolerance
Abstract
A 45 nm microprocessor core integrates resilient error-detection and recovery circuits to mitigate the clock frequency (FCLK) guardbands for dynamic parameter variations to improve throughput and energy efficiency. The core supports two distinct error-detection designs, allowing a direct comparison of the relative trade-offs. The first design embeds error-detection sequential (EDS) circuits in critical paths to detect late timing transitions. In addition to reducing the Fclk guardbands for dynamic variations, the embedded EDS design can exploit path-activation rates to operate the microprocessor faster than infrequently-activated critical paths. The second error-detection design offers a less-intrusive approach for dynamic timing-error detection by placing a tunable replica circuit (TRC) per pipeline stage to monitor worst-case delays. Although the TRCs require a delay guardband to ensure the TRC delay is always slower than critical-path delays, the TRC design captures most of the benefits from the embedded EDS design with less implementation overhead. Furthermore, while core min-delay constraints limit the potential benefits of the embedded EDS design, a salient advantage of the TRC design is the ability to detect a wider range of dynamic delay variation, as demonstrated through low supply voltage (VCC) measurements. Both error-detection designs interface with error-recovery techniques, enabling the detection and correction of timing errors from fast-changing variations such as high-frequency VCCdroops. The microprocessor core also supports two separate error-recovery techniques to guarantee correct execution even if dynamic variations persist. The first technique requires clock control to replay errant instructions at 1/2FCLK. In comparison, the second technique is a new multiple-issue instruction replay design that corrects errant instructions with a lower performance penalty and without requiring clock control. Silicon measurements demonstrate that resilient circuits enable a 41% throughput gain at equal energy or a 22% energy reduction at equal throughput, as compared to a conventional design when executing a benchmark program with a 10% VCCdroop. In addition, the microprocessor includes a new adaptive clock control circuit that interfaces with the resilient circuits and a phase-locked loop (PLL) to track recovery cycles and adapt to persistent errors by dynamically changing Fclk f°Γ maximum efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Razor: a low-power pipeline based on circuit-level timing speculation
Ernst, D., Kim, N. S., Das, S., Pant, S., Rao, R. R., Pham, T. T., Ziesler, C. H., Blaauw, D. T., Austin, T. M., Flautner, K., et al. (2003) · doi:10.5555/956417.956571 · Cited by 1,072
Razor: a low-power pipeline based on circuit-level timing speculation
Ernst, D., Kim, N. S., Das, S., Pant, S., Rao, R., Pham, T., Ziesler, C., Blaauw, D., Austin, T., Flautner, K., et al. (2004) · 22nd Digital Avionics Systems Conference. Proceedings (Cat. No.03CH37449) · doi:10.1109/micro.2003.1253179 · Cited by 858
Mistry, K., Chau, R., Choi, C.-H., Ding, G., Fischer, K., Ghani, T., Grover, R., Han, W., Hanken, D., Hattendorf, M., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4418914 · Cited by 854
Bowman, K. A., Duvall, S. G., & Meindl, J. D. (2002) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.982424 · Cited by 743
Self-citationRazorII: In Situ Error Detection and Correction for PVT and SER Tolerance
Das, S., Tokunaga, C., Pant, S., Ma, W.-H., Kalaiselvan, S., Lai, K., Bull, D. M., & Blaauw, D. T. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.2007145 · Cited by 598
Self-citationTime redundancy based soft-error tolerance to rescue nanometer technologies
Nicolaidis, M. (2003) · Proceedings 17th IEEE VLSI Test Symposium (Cat. No.PR00146) · doi:10.1109/vtest.1999.766651 · Cited by 500
A Self-Tuning DVS Processor Using Delay-Error Detection and Correction
Das, S., Roberts, D., Lee, S., Pant, S., Blaauw, D., Austin, T., Flautner, K., & Mudge, T. (2006) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2006.870912 · Cited by 396
Optimizing pipelines for power and performance
Srinivasan, V., Brooks, D. M., Gschwind, M. K., Bose, P. K., Zyuban, V. V., Strenski, P. N., & Emma, P. (2002) · doi:10.5555/774861.774897 · Cited by 128
Cited by
Minerva: enabling low-power, highly-accurate deep neural network accelerators
Reagen, B., Whatmough, P., Adolf, R., Rama, S., Lee, H., Lee, S. K., Hernández-Lobato, J. M., Wei, G.-Y., & Brooks, D. (2016) · ACM SIGARCH Computer Architecture News · doi:10.1145/3007787.3001165 · Cited by 446
Metadata
- Authors
- Bowman, K. A., Tschanz, J. W., Lu, S.-L. L., Aseron, P. A., Khellah, M. M., Raychowdhury, A., Geuskens, B. M., Tokunaga, C., Wilkerson, C. B., Karnik, T., & De, V. K.
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2011-01
- Volume
- 46
- Issue
- 1
- Pages
- 194-208
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W2015917466
- Cited by
- 266
- References
- 8
- FWCI
- 15.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A 45 nm Resilient Microprocessor Core for Dynamic Variation Tolerance. https://app.cochat.ai/papers/10.1109/jssc.2010.2089657
- The paper
- Bowman, K. A., Tschanz, J. W., Lu, S.-L. L., Aseron, P. A., Khellah, M. M., Raychowdhury, A., Geuskens, B. M., Tokunaga, C., Wilkerson, C. B., Karnik, T., & De, V. K. (2011). A 45 nm Resilient Microprocessor Core for Dynamic Variation Tolerance. IEEE Journal of Solid-State Circuits. https://doi.org/10.1109/jssc.2010.2089657
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.