The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
High-Performance Flexible Hybrid Field-Effect Transistors Based on Cellulose Fiber Paper
Open accessAbstract
In this letter, we report for the first time the use of a sheet of cellulose-fiber-based paper as the dielectric layer used in oxide-based semiconductor thin-film field-effect transistors (FETs). In this new approach, we are using the cellulose-fiber-based paper in an ldquointerstraterdquo structure since the device is built on both sides of the cellulose sheet. Such hybrid FETs present excellent operating characteristics such as high channel saturation mobility,(> 30 cm2/ vs drain-source current on/off modulation ratio of approximately 104, near-zero threshold voltage, enhancement n-type operation, and subthreshold gate voltage swing of 0.8 V/decade. The cellulose-fiber-based paper FETs' characteristics have been measured in air ambient conditions and present good stability, after two months of being processed. The obtained results outpace those of amorphous Si thin-film transistors (TFTs) and rival with the same oxide-based TFTs produced on either glass or crystalline silicon substrates. The compatibility of these devices with large-scale/large-area deposition techniques and low-cost substrates as well as their very low operating bias delineates this as a promising approach to attain high-performance disposable electronics like paper displays, smart labels, smart packaging, RFID, and point-of-care systems for self-analysis in bioapplications, among others.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Flexible energy storage devices based on nanocomposite paper
Pushparaj, V. L., Shaijumon, M. M., Kumar, A., Murugesan, S., Ci, L., Vajtai, R., Linhardt, R. J., Nalamasu, O., & Ajayan, P. M. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0706508104 · Cited by 1,116
Active Matrix Displays Based on All-Organic Electrochemical Smart Pixels Printed on Paper
Andersson, P., Nilsson, D., Svensson, P.-O., Chen, M., Malmström, A., Remonen, T., Kugler, T., & Berggren, M. (2002) · Advanced Materials · doi:10.1002/1521-4095(20021016)14:20<1460::aid-adma1460>3.0.co;2-s · Cited by 394
Zimmermann, B., Glatthaar, M., Niggemann, M., Riede, M., Hinsch, A., & Gombert, A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.005 · Cited by 130
Printing Methods and Materials for Large-Area Electronic Devices
Chabinyc, M. L., Wong, W. S., Arias, A. C., Ready, S. E., Lujan, R. A., Daniel, J., Krusor, B. S., Apte, R. B., Salleo, A., & Street, R. A. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.851492 · Cited by 65
Cited by
Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances
Fortunato, E., Barquinha, P., & Martins, R. (2012) · Advanced Materials · doi:10.1002/adma.201103228 · Cited by 3,197
Self-citationTobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Recent Developments in p‐Type Oxide Semiconductor Materials and Devices
Wang, Z., Nayak, P. K., Caraveo‐Frescas, J. A., & Alshareef, H. N. (2016) · Advanced Materials · doi:10.1002/adma.201503080 · Cited by 779
Binary copper oxide semiconductors: From materials towards devices
Meyer, B. K., Polity, A., Reppin, D., Becker, M., Hering, P., Klar, P. J., Sander, T., Reindl, C., Benz, J., Eickhoff, M., et al. (2012) · physica status solidi (b) · doi:10.1002/pssb.201248128 · Cited by 741
Metadata
- Authors
- Fortunato, E., Correia, N., Barquinha, P., Pereira, L., Goncalves, G., & Martins, R.
- Venue
- IEEE Electron Device Letters
- Published
- 2008-09
- Volume
- 29
- Issue
- 9
- Pages
- 988-990
- ISSN
- 0741-3106 (ISSN-L)
- OpenAlex
- W2169673273
- Cited by
- 283
- References
- 5
- FWCI
- 17.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.