Extended Sliding Mode Observer-Based Admittance Control for Hydraulic Robots
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In this letter, an admittance control algorithm has been proposed for hydraulic robots in the presence of model uncertainties, external disturbances, and system nonlinearities without contact force sensors. An extended sliding mode observer (ESMO) is firstly developed based on joint force sensors and pressure signals in chambers of hydraulic actuators to estimate not only the contact force with an environment but also the joint velocities which are robust to unknown friction in hydraulic actuators. Matched uncertainties and disturbances in actuator dynamics are observed by a matched disturbance observer. These techniques are integrated into the backstepping framework to handle high nonlinearities in the hydraulic and mechanical systems and achieve the desired admittance behavior of the robotics system. Simulation results are conducted with a two-degree-of-freedom (2-DOF) hydraulic leg robot with different case studies, which verifies the effectiveness of the proposed control method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impedance Control: An Approach to Manipulation: Part I—Theory
Hogan, N. (1985) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3140702 · Cited by 3,673
Yang, C., Song, B., Xie, Y., & Tang, X. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3067328 · Cited by 61
Ba, K.-X., Ma, G.-L., Yu, B., Jin, Z.-G., Huang, Z.-P., Zhang, J.-X., & Kong, X.-D. (2020) · International Journal of Control, Automation and Systems · doi:10.1007/s12555-019-0151-0 · Cited by 47 · cited 1×
“INTRODUCTION ue to the advantages of high-power-to-weight ratio and large force/torque output, electrohydraulic servomechanism is widely used in many industrial and/or military applications as robot manipulator [1-3], rolling mills [4], hydraulic press [5], construction machines [6-8], aircraft actuators [9, 10], acti…”
Background
Cited by
Nguyen, M. H., Dao, H. V., & Ahn, K. K. (2023) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.6421 · Cited by 48
Self-citationAdaptive neural network finite-time tracking control for uncertain hydraulic manipulators
Liang, X., Yao, Z., Deng, W., & Yao, J. (2025) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2024.3396493 · Cited by 41
Truong, H. V. A., Nam, S., Kim, S., Kim, Y., & Chung, W. K. (2024) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2023.3323148 · Cited by 39
“Observer-based active fault-tolerant control schemes were also developed for hydraulic robotic applications to deal with position and force sensor faults [24] or actuator faults in leg robots [25] subject to constrained frameworks.”
Method
Metadata
- Authors
- Dao, H. V., & Ahn, K. K.
- Venue
- IEEE Robotics and Automation Letters
- Published
- 2022-04
- Volume
- 7
- Issue
- 2
- Pages
- 3992-3999
- ISSN
- 2377-3766 (ISSN-L)
- 2377-3774
- OpenAlex
- W4210266580
- Cited by
- 40
- References
- 3
- FWCI
- 2.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Extended Sliding Mode Observer-Based Admittance Control for Hydraulic Robots. https://app.cochat.ai/papers/10.1109/lra.2022.3147244
- The paper
- Dao, H. V., & Ahn, K. K. (2022). Extended Sliding Mode Observer-Based Admittance Control for Hydraulic Robots. IEEE Robotics and Automation Letters. https://doi.org/10.1109/lra.2022.3147244
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.