Correlated Effects on Forming and Retention of Al Doping in HfO2-Based RRAM
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Retention time is one of the key parameters of emerging memories, which define the time duration the data can be retained when the power supply is removed. In this work, the authors investigate the forming voltage and the data retention of aluminum (Al)-doped HfO2-based RRAM devices and suggest a way to improve the device's data retention time.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Once the CF is recreated, the electric field is approximately equal to VP/tOX ∼ 1.7 MV/cm (being tOX the HfO2 thickness), which is far lower than the critical field of ∼ 4-5 MV/cm needed to break Hf-O bonds [15].”
From Linking Conductive Filament Properties and Evolution to Synaptic Behavior of RRAM Devices for Neuromorphic Applications (2017) · cites this paper as [15]
Citations
Cites
Govoreanu, B., Kar, G. S., Chen, Y.-Y., Paraschiv, V., Kubicek, S., Fantini, A., Radu, I. P., Goux, L., Clima, S., Degraeve, R., et al. (2011) · 2011 International Electron Devices Meeting · doi:10.1109/iedm.2011.6131652 · Cited by 624
McPherson, J. W., & Mogul, H. C. (1998) · Journal of Applied Physics · doi:10.1063/1.368217 · Cited by 507 · cited 1×
“O bond breakage originating the conductive filament formation [10].”
BackgroundThermochemical description of dielectric breakdown in high dielectric constant materials
McPherson, J., Kim, J.-Y., Shanware, A., & Mogul, H. (2003) · Applied Physics Letters · doi:10.1063/1.1565180 · Cited by 398 · cited 1×
“The forming process is dominated by the generation rate of O vacancy/ion pairs (G), which is modeled in the framework of the thermochemical model described by [12], [13]”
MethodResistive Memories for Ultra-Low-Power embedded computing design
Vianello, E., Thomas, O., Molas, G., Turkyilmaz, O., Jovanovic, N., Garbin, D., Palma, G., Alayan, M., Nguyen, C., Coignus, J., et al. (2014) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2014.7046995 · Cited by 119 · cited 1×
“Resistive switching memories (RRAM) are considered one of the best candidates for the next generation of non-volatile memories, due to their fast switching, high endurance, low power consumption and good scalability [1-4].”
BackgroundSelf-citationTraoré, B., Blaise, P., Vianello, E., Grampeix, H., Jeannot, S., Perniola, L., de Salvo, B., & Nishi, Y. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2490545 · Cited by 89
Self-citationCharge Transport and Degradation in HfO2 and HfOx Dielectrics
Padovani, A., Larcher, L., Bersuker, G. I., & Pavan, P. (2013) · IEEE Electron Device Letters · doi:10.1109/led.2013.2251602 · Cited by 79
Self-citationPark, S.-G., Yang, M. K., Ju, H., Seong, D.-J., Lee, J. M., Kim, E., Jung, S., Zhang, L., Shin, Y. C., Baek, I.-G., et al. (2012) · 2012 International Electron Devices Meeting · doi:10.1109/iedm.2012.6479084 · Cited by 78 · cited 1×
“Resistive switching memories (RRAM) are considered one of the best candidates for the next generation of non-volatile memories, due to their fast switching, high endurance, low power consumption and good scalability [1-4].”
BackgroundGoux, L., Fantini, A., Kar, G., Chen, Y.-Y., Jossart, N., Degraeve, R., Clima, S., Govoreanu, B., Lorenzo, G., Pourtois, G., et al. (2012) · 2012 Symposium on VLSI Technology (VLSIT) · doi:10.1109/vlsit.2012.6242510 · Cited by 67 · cited 1×
“the sub-μA current operating regime) [8,9].”
Effect of Al doping on the retention behavior of HfO2 resistive switching memories
Frascaroli, J., Volpe, F. G., Brivio, S., & Spiga, S. (2015) · Microelectronic Engineering · doi:10.1016/j.mee.2015.04.043 · Cited by 62 · cited 1×
“[14] investigated the impact of Al doping on the thermal stability of the high resistive state (Roff) and showed that tailoring of the Al concentration allows improving the retention of the Roff state.”
Background28nm advanced CMOS resistive RAM solution as embedded non-volatile memory
Benoist, A., Blonkowski, S., Jeannot, S., Denorme, S., Damiens, J., Berger, J., Candelier, P., Vianello, E., Grampeix, H., Nodin, J. F., et al. (2014) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/irps.2014.6860604 · Cited by 60 · cited 1×
“Resistive switching memories (RRAM) are considered one of the best candidates for the next generation of non-volatile memories, due to their fast switching, high endurance, low power consumption and good scalability [1-4].”
BackgroundSelf-citation
Research works printed but not linked: 4
- padovani, 2015, Microscopic modeling of HfOx RRAM operations: From forming to switching, IEEE Trans Electron Devices, 1
- govoreanu, 2011, 10 $\times$ 10nm2 Hf/HfOx crossbar resistive RAM with excellent performance, reliability and low- energy operation, et al, 31.6.1
- traoré, 0, Microscopic understanding of the low resistance state retention in HfO2 and HfAlO based RRAM, et al, 21.5.1
- goux, 0, Ultralow sub-500nA operating current high-performance TiN\Al2O3\HfO2Hf\TiN bipolar RRAM achieved through understanding-based stack-engineering, et al, 159
Cited by
Woo, J., Padovani, A., Moon, K., Kwak, M., Larcher, L., & Hwang, H. (2017) · IEEE Electron Device Letters · doi:10.1109/led.2017.2731859 · Cited by 103
“7 MV/cm (being tOX the HfO2 thickness), which is far lower than the critical field of ∼4-5 MV/cm needed to break Hf-O bonds [15].”
BackgroundSelf-citationPadovani, A., & Larcher, L. (2018) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/irps.2018.8353552 · Cited by 40
“The zero-field activation energy EA and the molecular dipole moment p0 are the most relevant material-related parameters, derived from either ab-initio calculations [11] or experimental data [13], [19].”
MethodSelf-citationBoron Vacancies Causing Breakdown in 2D Layered Hexagonal Boron Nitride Dielectrics
Ranjan, A., Raghavan, N., Puglisi, F. M., Mei, S., Padovani, A., Larcher, L., Shubhakar, K., Pavan, P., Bosman, M., Zhang, X., et al. (2019) · IEEE Electron Device Letters · doi:10.1109/led.2019.2923420 · Cited by 30
Self-citationMultiscale modeling of defect-related phenomena in high-k based logic and memory devices
Padovani, A., Larcher, L., Puglisi, F. M., & Pavan, P. (2017) · IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) · doi:10.1109/ipfa.2017.8060063 · Cited by 25
“The generation rates are calculated using an effective-energy description model [11], [12], [19] whose most relevant parameters, the zero-field activation energy EA and the bond polarization factor b, are derived either from ab-initio/DFT calculations [7] or from experimental data [11], [12], [20]”
MethodSelf-citationPadovani, A., & Torraca, P. L. (2023) · Microelectronic Engineering · doi:10.1016/j.mee.2023.112080 · Cited by 12
Self-citation
Metadata
- Authors
- Alayan, M., Vianello, E., de Salvo, B., Perniola, L., Padovani, A., & Larcher, L.
- Affiliations
- Commissariat à l'Énergie Atomique et aux Énergies Alternatives (FR)
- University of Modena and Reggio Emilia (IT)
- Venue
- IEEE Design & Test
- Published
- 2017-06
- Volume
- 34
- Issue
- 3
- Pages
- 23-30
- ISSN
- 2168-2356 (ISSN-L)
- 2168-2364
- OpenAlex
- W2595345733
- Cited by
- 11
- References
- 13
- Citations by year
- 2026: 1 · 2023: 2 · 2020: 1 · 2019: 3 · 2018: 1 · 2017: 3
- FWCI
- 0.91
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Design and Test (publishedVersion)
- IRIS UNIMORE (University of Modena and Reggio Emilia) (submittedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- resistive random access memory, hafnium oxide, aluminum doping, data retention, retention time, forming voltage, resistive switching, non-volatile memory
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.