The Incredible Shrinking Motor Drive: Accelerating the Transition to Integrated Motor Drives
The DOI matches its Crossref record; 22 of the 23 references it cites were found in a registry or an index.
Abstract
A technology revolution is unfolding around us as every major mode of transportation is in some stage of electrification, whether on land, sea, or in the air. All of these transportation modes depend on electric machines that play critical roles in both propulsion systems as well as in a wide variety of accessory equipment. Fuel economy and reduced emissions of greenhouse gases and other pollutants are major driving forces for electrified transportation. Despite the significant differences between these varied transportation modes, they all share strong motivations to make their electric machines and adjustable-speed drives smaller, lighter, and more efficient. An excellent example of this trend for the power electronic drives is provided by comparing the drive units in the Tesla S (2012) and Tesla 3 (2017). As shown in the side-by-side views provided in Figure 1, the drive unit shrank in size from an enclosure that matched the size of its main traction motor to a much smaller unit that, at first sight, appears to be a non-descript end-bell attached to one end of the motor. Rather than focusing here on how this impressive reduction in mass and volume was achieved (addressed later in this article), the key point here is that similar technology trends are under way in many of the other transportation modes as well, making electrified transportation increasingly appealing and competitive in the process.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“SiC-based devices are widely adopted in hybrid and electric vehicles traction inverters (Tesla uses SiC transistors since 2017 [15]), while they can also be found in lower volumes in on-board-chargers (OBCs) and traction inverters of hypercars and racing cars.”
From Review and Outlook on GaN and SiC Power Devices: Industrial State-of-the-Art, Applications, and Perspectives (2024) · cites this paper as [15]
Citations
Cites
Transient effects in application of PWM inverters to induction motors
Persson, E. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.158834 · Cited by 445
Transient effects in application of PWM inverters to induction motors
Persson, E. (2002) · Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference · doi:10.1109/papcon.1991.239644 · Cited by 355 · cited 1×
“10 times faster than those of the thyristors and bipolar transistors that they were replacing [10].”
The Past, Present, and Future of Power Electronics Integration Technology in Motor Drives
University of Wisconsin-Madison, & Jahns, T. M. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00019 · Cited by 205 · cited 1×
“This concept of an integrated motor drive (IMD) is contrasted in Figure 2 with conventional adjustable-speed motor drives that dominate commercial production and use today consisting of completely separate enclosures for the drive electronics and the electric machine connected by a power cable [1], [2].”
Self-citationIntegrated motor drives: state of the art and future trends
Abebe, R., Vakil, G., Lo Calzo, G., Cox, T., Lambert, S., Johnson, M., Gerada, C., & Mecrow, B. (2016) · IET Electric Power Applications · doi:10.1049/iet-epa.2015.0506 · Cited by 169 · cited 1×
“This concept of an integrated motor drive (IMD) is contrasted in Figure 2 with conventional adjustable-speed motor drives that dominate commercial production and use today consisting of completely separate enclosures for the drive electronics and the electric machine connected by a power cable [1], [2].”
BackgroundCurrent-Source Converter for AC Motor Drives
Phillips, K. P. (1972) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1972.349851 · Cited by 131 · cited 1×
“, turn off) the previously conducting thyristor each time one of the other two thyristors connected to the same dc bus was triggered [19].”
BackgroundPower Converter Design for an Integrated Modular Motor Drive
Brown, N. R., Jahns, T. M., & Lorenz, R. D. (2007) · 2007 IEEE Industry Applications Annual Meeting · doi:10.1109/07ias.2007.205 · Cited by 120 · cited 1×
“Integrated Modular Motor Drives (IMMDs): A Path to Higher Fault Tolerance Another intriguing extension of the basic IMD concept that has been attracting increased attention from researchers is the Integrated Modular Motor Drive (IMMD), which, as its name implies, adapts the IMD to accentuate its compatibility with hig…”
Self-citationShaping High-Power IGBT Switching Transitions by Active Voltage Control for Reduced EMI Generation
Yang, X., Yuan, Y., Zhang, X., & Palmer, P. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2347578 · Cited by 119 · cited 1×
“An alternative approach is to actively control the gate drive excitation to slow down the voltage transitions in the inverters output waveforms, suppressing the negative effects of the steep voltage wavefronts summarized above [9].”
BackgroundDai, H. J., & Jahns, T. M. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341384 · Cited by 69 · cited 1×
“[12].”
Self-citationCurrent-Source Inverters for Integrated Motor Drives using Wide-Bandgap Power Switches
Torres, R. A., Dai, H. J., Lee, W., Jahns, T. M., & Sarlioglu, B. (2018) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2018.8450127 · Cited by 64 · cited 1×
“WBG-Based Current-Source Inverters One promising approach for addressing the technical challenges associated with WBG switches described above while still taking full advantage of their benefits is to revisit the concept of current-source inverters (CSIs) [11].”
BackgroundSelf-citationHardware integration for an integrated modular motor drive including distributed control
Shea, A., & Jahns, T. M. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6954070 · Cited by 61 · cited 5×
“As a result, if a single PDU fails and takes itself off-line in an IMMD with n PDUs, the remaining ( )n 1- healthy PDUs can continue performing their assigned functions in order to retain ( )/n n1- fractional percent of the IMMD’s original power rating when fully healthy.”
MethodInfluentialSelf-citation
Research works printed but not linked: 3
- dai, 0, High-fidelity modeling and experimental evaluation of WBG two-level voltage-source and current-source inverters with different output cables and filters, Proc IEEE Energy Conversion Congress and Expos
- singh, 0, Silicon carbide inverter technology development A success story
- 10.1109/itec.2018.8450157 · DOI
Cited by
Buffolo, M., Favero, D., Marcuzzi, A., De Santi, C., Meneghesso, G., Zanoni, E., & Meneghini, M. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3346369 · Cited by 476
“SiC-based devices are widely adopted in hybrid and electric vehicles traction inverters (Tesla uses SiC transistors since 2017 [15]), while they can also be found in lower volumes in on-board-chargers (OBCs) and traction inverters of hypercars and racing cars.”
BackgroundAircraft Distributed Electric Propulsion Technologies—A Review
Fard, M. T., He, J., Huang, H., & Cao, Y. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3197332 · Cited by 213
“Each inverter drives a set of three-phase winding [148], [149].”
BackgroundIn-Wheel Motor Drive Systems for Electric Vehicles: State of the Art, Challenges, and Future Trends
Deepak, K., Frikha, M. A., Benômar, Y., Baghdadi, M. E., & Hegazy, O. (2023) · Energies · doi:10.3390/en16073121 · Cited by 153
“According to [75] the latest advancements of wide bandgap semiconductors has improved the power density and ability to withstand higher temperature for elongated time of power electronics modules.”
BackgroundSilicon Carbide Power Devices: Progress and Future Outlook
Baliga, B. J. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3258344 · Cited by 136
“performance voltage source inverters (VSIs) [98].”
A technology overview of thermal management of integrated motor drives – Electrical Machines
Wróbel, R. (2022) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2022.101222 · Cited by 66
Rehman, A. U., Ryu, S., Park, H., & Jung, J. (2024) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2023.3347736 · Cited by 70
“Asaresult,global [71], [72], including rule-based (RB) [58], [59], [60], [61], [62], [63], [64], [65], optimization-based (OB) [66], [67], [68], and data-driven-based (DB) [69], [70], [71], [72] solutions.”
BackgroundMethodInfluentialZhou, W., Diab, M. S., Yuan, X., & Chen, W. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3157395 · Cited by 62
Overview of Integrated Electric Motor Drives: Opportunities and Challenges
Zhang, B., Song, Z., Liu, S., Huang, R., & Liu, C. (2022) · Energies · doi:10.3390/en15218299 · Cited by 54
“The inverter was housed in a separate converter box for the early integrated motors, which was connected to the top of the motor by a unique connection plate [11], such as the Siemens CombiMaster FSA motor and SEW-Movimot Eurodrive’s motor [12].”
MethodOverview on Permanent Magnet Motor Trends and Developments
Vlachou, V. I., Sakkas, G. K., Xintaropoulos, F. P., Pechlivanidou, M. S. C., Kefalas, T. D., Tsili, M. A., & Kladas, A. G. (2024) · Energies · doi:10.3390/en17020538 · Cited by 63
Vollmaier, F., Nain, N., Huber, J., Kolar, J. W., Leong, K. K., & Pandya, B. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595422 · Cited by 48
“2b, is of high interest regarding TT converter topologies (in addition to current-source or matrix converter topologies that also rely on devices with bipolar blocking and bidirectional current carrying capability [9]–[13]).”
BackgroundGaN Bidirectional Switches: The Revolution is Here
Bisi, D. (2025) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2024.3522985 · Cited by 40
“Several demonstrations of single-stage topologies have been reported by the academia towards multiple applications, such as solar energy harvesting [4], automotive and battery systems [9], motor drives [7], [8], [10], [11], solid-state transformers [12], and many more [13].”
Wu, S., Zhou, J., Zhang, X., & Yu, J. (2022) · Energies · doi:10.3390/en15103542 · Cited by 39
The Modular Current-Fed High-Frequency Isolated Matrix Converters for Wind Energy Conversion
Xu, Y., Wang, Z., Liu, P., Wei, Q., Deng, F., & Zou, Z. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3123204 · Cited by 37
Medium- and Heavy-Duty Vehicle Electrification: Trends and Technologies
Hasnain, A., Gamwari, A. S., Resalayyan, R., Sadabadi, K. F., & Khaligh, A. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3444692 · Cited by 35
Haider, M., Niklaus, P. S., Madlener, M., Rohner, G., & Kolar, J. W. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3283052 · Cited by 31
“, due to partial discharge and/or accelerated insulation aging [9], [13].”
BackgroundFidone, G. L., Migliazza, G., Carfagna, E., Benatti, D., Immovilli, F., Buticchi, G., & Lorenzani, E. (2023) · Energies · doi:10.3390/en16155645 · Cited by 30
Tokgöz, F., Gülsuna, Ö., Karakaya, F., Çakal, G., & Keysan, O. (2022) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2022.3213896 · Cited by 30
“However, integrated motor drives have problems in mechanical and thermal aspects as both motor and the driver needs to be cooled from a much smaller surface area [14].”
BackgroundA Review of EMI Research of High Power Density Motor Drive Systems for Electric Actuator
Wang, Z., Jiang, D., Liu, Z., Zhao, X., Yang, G., & Liu, H. (2023) · Actuators · doi:10.3390/act12110411 · Cited by 26
Nain, N., Zhang, D., Huber, J., Kolar, J. W., Leong, K. K., & Pandya, B. (2021) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel52922.2021.9646006 · Cited by 25
“, a battery-supplied DCAC CSI [8], [12], the necessarily present DC-side voltage-”
BackgroundMonolithic Bidirectional Lateral GaN Switches Reinvigorate Power Electronics Applications
Veliadis, V., & Jahns, T. M. (2025) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2025.3528696 · Cited by 24
“Of course, the adoption of the CSI creates its own set of technical challenges that must be addressed, but the CSI’s advantages are sufficiently compelling to make it a target for significant new attention and development for a variety of candidate applications [6].”
Self-citationPassive Component Optimization for Current-Source-Inverters
Riegler, B., & Muetze, A. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3282565 · Cited by 21
“However, increasing the switching frequency of the commonly used voltage-source-converters (VSCs) and therefore the d v d t of the pulse width modulated output voltages not only offers advantages, such as a potential reduction Fig.”
BackgroundInfluentialEmerging Technologies for Advanced Power Electronics and Machine Design in Electric Drives
Rihar, A., Nemec, M., Lavrič, H., Zajec, P., Vončina, D., Nedeljković, D., Ambroz̆ic̆, V., & Drobnič, K. (2024) · Applied Sciences · doi:10.3390/app142411559 · Cited by 19
A New Current Source Converter Using AC-Type Flying-Capacitor Technique
Ding, L., Li, Y., & Li, Y. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3067799 · Cited by 21
GaN Bidirectional Switches: Device Technology, Applications, and Future Prospects
Liu, J., Kim, H., Young, A. J., Jiao, Y., Persson, E., Xiao, Z., Pandya, B., Jahns, T. M., & Imam, M. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3632866 · Cited by 21
“The CSI offers several appealing performance features, including low harmonic content in the output, lower common-modeelectromagneticinterference(EMI)generation,andhigher safeoperatingtemperaturesofdc-linkinductorscomparedto filmorelectrolyticcapacitorsusedinVSIs[40].”
Self-citationNain, N., Huber, J., & Kolar, J. W. (2022) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-himeji2022-ecce53331.2022.9806900 · Cited by 19
“the emergence of WBG devices that enable higher switching frequencies and hence imply smaller magnetic components has sparked renewed interest in CSCs also for low-power VSD applications [6]–[9].”
BackgroundNain, N., Kovacevic-Badstuebner, I., Huber, J., Großner, U., & Kolar, J. W. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9948085 · Cited by 19
Integrated Induction Motor Drive for Variable Speed Industrial Applications
Bahrami-Fard, M., Chen, T., Winchell, E. A., & Fahimi, B. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3532880 · Cited by 18
“Advancements in power electronics component and packaging technologies, including the progression of high-temperature power semiconductor switches such as silicon carbide, are essential for enabling the power converter to fulfill these requirements [24], [25].”
Kanale, A., Agarwal, A., Baliga, B. J., & Bhattacharya, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3166933 · Cited by 17
Broumand, M., Yun, S., & Hong, Z. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122802 · Cited by 16
Volume Comparison of Passive Components for Hard-Switching Current- and Voltage-Source-Inverters
Riegler, B., & Muetze, A. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595392 · Cited by 13
Nain, N., Zhang, D., Kolar, J. W., & Huber, J. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3546171 · Cited by 12
“…stages, that are employed in the finally built hardware demonstrator (cf., Section IV), are not shown here for the sake of clarity and the missing relevance for the proposed synergetic control method. driven by wide-bandgap (WBG) power semiconductors [15], [16], [17], [18], [19], [20], [21], [22].”
Kim, J.-C., Nguyen, M. H., Kwak, S., & Choi, S. (2023) · Machines · doi:10.3390/machines11060612 · Cited by 12
“Switching devices show different aging degrees under the same aging conditions [1,4].”
BackgroundMethodInfluentialA Review of SiC Commercial Devices for Automotive: Properties and Challenges
Marcuzzi, A., Favero, D., Santi, C. D., Meneghesso, G., Zanoni, E., & Meneghini, M. (2023) · AEIT International Conference of Electrical and Electronic Technologies for Automotive (AEIT AUTOMOTIVE) · doi:10.23919/aeitautomotive58986.2023.10217233 · Cited by 13
In-System Calibration of Position Sensor Offset in PMSM Drives
Kuruppu, S. S. (2021) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc47953.2021.9449553 · Cited by 12
“High torque, power density and compact design being primary requirements, permanent magnet synchronous machines (PMSMs), easily surpass other machines [2].”
BackgroundRohner, G., Kolar, J. W., Bortis, D., & Schweizer, M. (2022) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems56177.2022.9982999 · Cited by 11
“Therefore, a trend has developed in recent years towards drive systems with motorintegrated inverters, which largely eliminate the need for complex wiring and thus enable simple installation of the drive system [1].”
BackgroundComparative Evaluation of Three-Phase SiC-Based Voltage/Current-Source Inverter Motor Drives
Sbabo, P., Menzi, D., Imperiali, L., Mattavelli, P., Kolar, J. W., & Huber, J. (2024) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Europe (WiPDA Europe) · doi:10.1109/wipdaeurope62087.2024.10797449 · Cited by 10
Han, P., Heins, G., Zhang, Y., & Ionel, D. M. (2021) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc47953.2021.9449608 · Cited by 9
Bogdanovs, A., Krievs, O., & Pforr, J. (2022) · IEEE International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON) · doi:10.1109/rtucon56726.2022.9978767 · Cited by 9
Design and Implementation of 3 kW All-SiC Current Source Inverter
Riegler, B., & Hartmann, M. (2025) · Electronics · doi:10.3390/electronics14030522 · Cited by 8
Lee, D.-S., Sirimanna, S., Huynh, P., Libbos, E., Banerjee, A., & Haran, K. S. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3068101 · Cited by 8
Kuruppu, S. S. (2021) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec51675.2021.9490171 · Cited by 8
Fault-Tolerant Control and Common-Mode Voltage Reduction for Dual Three-Phase CSIs Fed Motor Drives
Xu, Y., Wang, Z., Huang, W., & Shen, Y. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3496419 · Cited by 7
Power Electronics: Historical Notes, Recent Advances And Contemporary Challenges
Tan, D. F. D. (2020) · Eletrônica de Potência · doi:10.18618/rep.2020.4.00701 · Cited by 8
Impacts of SiC-MOSFET Gate Oxide Degradation on Three-Phase Voltage and Current Source Inverters
Kim, J.-C., Kwak, S., & Choi, S. (2022) · Machines · doi:10.3390/machines10121194 · Cited by 8
Brody, R., Ohodnicki, P. R., & Grainger, B. M. (2023) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec55900.2023.10187044 · Cited by 6
“power electronics, control) trade-offs [2], [3].”
Efficiency Considerations of a 3kW, all SiC Current-Source Converter
Riegler, B., Lee, Y., Castellazzi, A., & Hartmann, M. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10860973 · Cited by 5
Marcuzzi, A., Avramenko, M. V., Santi, C. D., Moens, P., Garcia, G. J. G., Feng, A., Grasser, T., Meneghesso, G., Zanoni, E., & Meneghini, M. (2025) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/irps48204.2025.10982738 · Cited by 5
Review of Multiphase Machines for Integrated Motor Drives
Vu, D. T., Nguyen, N. K., & Semail, E. (2024) · International Conference on Control, Automation and Information Sciences (ICCAIS) · doi:10.1109/iccais63750.2024.10814461 · Cited by 5
Rahimi, L., Dòria‐Cerezo, A., & Griñó, R. (2023) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie51358.2023.10227927 · Cited by 5
“Hence, there seems to have been a revival of the CSI topology, and it has been recently considered for different applications such as grid-connected power converters [1], single-phase PV systems [7], programmable ac sources and UPSs [8], or drive applications [9], [10].”
BackgroundWang, W., Nøland, J. K., Olsen, P. K., & Johannessen, S. W. (2024) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icem60801.2024.10700249 · Cited by 5
“There are possibilities to handle short-circuit current, for instance, using protective devices such as ac breaker, contactor etc.; utilizing current source converter [4]; increasing winding inductance of PMSMs or adding external inductors.”
BackgroundPartial Saturation in Permanent Magnet Inductors
Houska, B., Yan, D., Benzaquen, J., & Divan, D. M. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947664 · Cited by 5
“Magnetics-based converters such as the current source converter (CSC) and the soft-switching solid-state transformer (S4T) have gained interest for high power density applications [1] [2].”
BackgroundA New PWM Scheme for H7 Current Source Inverter With Minimal Switching
Kumar, A., & Yadav, A. K. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3565910 · Cited by 4
Weak Grid Operation of A Grid-Following Current-Sourced PV Solar System
Wang, Z., Miao, Z., Fan, L., & Yazdani, A. (2021) · North American Power Symposium (NAPS) · doi:10.1109/naps52732.2021.9654540 · Cited by 4
Nain, N., Zhang, Y., Walser, S., Kolar, J. W., & Huber, J. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3602313 · Cited by 3
“These advantages have driven research on CSCs implemented with WBG devices also for LV applications [19], [20], [21], [22], [23], [24], [25], [26], [27], [28], [29].”
Riegler, B., & Muetze, A. (2022) · IEEE Annual Southern Power Electronics Conference · doi:10.1109/spec55080.2022.10058239 · Cited by 3
“This paper investigates how the switching losses of the CSC can be measured using a fundamental commutation cell (similar to the half-bridge double pulse test of the VSC).”
BackgroundInfluentialA New Switching Scheme for H7 Current Source Inverter with Integrated Soft Switching Transitions
Kumar, A., & Yadav, A. K. (2022) · IEEE International Conference on Power Electronics, Drives and Energy Systems · doi:10.1109/pedes56012.2022.10080292 · Cited by 3
“The performance and efficiency of EV motor drives are highly influenced by the power electronic system (including DC-DC converter and VSI) and its power cables (interconnections between motor and inverter system) used for motor drives [1]-[3].”
BackgroundNarasimhan, S., Dhiman, S., Thirumoorthi, S. R., Das, P. P., & Bhattacharya, S. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861876 · Cited by 2
Optimization of Compressor Preheating to Increase Efficiency, Comfort, and Lifespan
Dianov, A. (2025) · Technologies · doi:10.3390/technologies13120590 · Cited by 2
Integration—A Major Driver of Power Electronics Innovation
Huber, J., Jahns, T. M., & Kolar, J. W. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3670611 · Cited by 3
“(e)Photoofa3kW IMDusingacurrent-sourceinvertertopologyandtheaxialendplatemountconfigurationfrom(c);imagefrom[19].”
Self-citationFour Quadrants Operations of Single-Stage CSI With Discharge Path in Motor Drives Applications
Migliazza, G., Carfagna, E., Immovilli, F., & Lorenzani, E. (2026) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2026.3679792 · Cited by 2
“However, the recent introduction of wide-bandgap (WBG) power switches [11] raises important considerations regarding their application in VSIs, potentially revitalizing interest in CSIs with enhanced ef-ficiency [12].”
Akatsu, K., & Fukuda, K. (2021) · World Electric Vehicle Journal · doi:10.3390/wevj12020061 · Cited by 2
“Introduction An integrated permanent magnet synchronous motor (PMSM) coupled with an inverter is part of a mainstream effort to develop a small traction system for electric vehicles (EVs) [1].”
BackgroundElectrolytic Capacitor-Less Wireless Motor Drive System With Delta-Sigma Modulation
Chen, X. F., Tse, C. K., Wang, X., Jiang, C., Chen, Q., & Lai, C. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3577288 · Cited by 1
“Moreover, harsh thermal and vibrational conditions from motor operations can adversely impact the capacitors ’ lifespan [20].”
Machine Parameter Error Influence on PMSM Position Sensor Offset Error Quantification
Kuruppu, S. S. (2022) · IEEE International Conference on Electro Information Technology · doi:10.1109/eit53891.2022.9813894 · Cited by 1
Cooling limits of passively cooled integrated motor drives
Bringezu, T., & Biela, J. (2021) · European Conference on Power Electronics and Applications · doi:10.23919/epe21ecceeurope50061.2021.9570428 · Cited by 1
WBG-Based Integrated Motor Drive Using a Current Source Inverter
Jahns, T. M., Sarlioglu, B., Dai, H. J., & Torres, R. A. (2025) · Springer eBooks · doi:10.1007/978-3-031-78631-0_6 · Cited by 1
Self-citationBrody, R. (2024) · D-Scholarship@Pitt (University of Pittsburgh) · Cited by 2
Iturra, R. G., & Thiemann, P. J. (2021) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-030-73585-2_1
Cooling limits of passively cooled integrated motor drives
Bringezu, T., & Biela, J. (2021) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000514803
“180◦C [3], which is mainly limited by the winding insulation class (class F: 155◦C, class H: 180 ◦C).”
BackgroundMotor Power Pulsation Buffer for Single-to-Three-Phase Current-Source-Converter Drives
Haider, M., Kolar, J. W., & Huber, J. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362756
A 2-in-1 Switched-Capacitor Inverter for Next-Generation Modular Motors
Luo, Z., Vu, H.-N., Das, R., & Le, H. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362208
“The compact SC inverter can enable integration with each motor’s module in the future [5].”
BackgroundWBG-Enabled Current-Source Inverters for Integrated PM Motor Drives
Univ. of Wisconsin, M., Jahns, T. M., & Sarlioglu, B. (2022) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/2319035
Self-citationSystem analysis of integration methods in novel electric motor drive systems
Mikhaylov, Y., & Buticchi, G. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia60879.2024.10567093
MnBi IPMSM and PMASynRM Torque Density Limitations due to Temperature-Dependent Demagnetization
Brody, R., Ohodnicki, P. R., & Grainger, B. M. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861014
The Sensorless Control of Integrated Motor Drive System
Fang, D., Chai, L., & Liu, B. (2024) · International Conference on Systems and Informatics (ICSAI) · doi:10.1109/icsai65059.2024.10893834
“The second stage is to place the integrated controller in the motor housing, and the converter of the motor is installed on the end plate or stator surface [3].”
Dutta, S., & Yadav, A. K. (2024) · IEEE International Conference on Power Electronics, Drives and Energy Systems · doi:10.1109/pedes61459.2024.10960902
“On the other hand, achieving a minimal functional volume is vital for the growing trend of Integrated Motor Drives (IMDs), where the driver is incorporated within the machine housing due to space constraints [4].”
Benatti, D., Migliazza, G., Carfagna, E., Immovilli, F., & Lorenzani, E. (2025) · IEEE Access · doi:10.1109/access.2025.3588694
“Thanks to the sinusoidal waveforms of the output voltages and reduced dV / dt , the current source inverter (CSI) exhibit reduced insulation stress [4], reliability, and fault-tolerance with respect to the voltage source inverter (VSI) [5] allowing to mitigate electromagnetic interferences (EMI)…”
Du, Y., Wu, Z., Xu, Q., Hua, W., & Yu, W. (2025) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2025.3587958
“Through the collaborative optimization of power electronics and electromagnetic design, the problems of high-frequency switching loss and heat dissipation are solved [8], [9].”
Huang, W., Wang, Z., & Xu, Y. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3608279
“With the filter capacitors installed at the ac side, the sinusoidal voltage waveform is presented at the output side of CSI, which e ff ectively suppresses output d v / d t and mitigates issues such as overvoltage and electromagnetic interference (EMI) [4], [5], [6].”
Motor-Integrated Segmented Inverters
Leonarski, J., Tran, A. W., Gheja, Z. R., Tenaglia, G., Murthy‐Bellur, D., & Kresse, J. P. (2025) · International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM) · doi:10.1109/3d-peim64703.2025.11180277
“Adopting motors with non-rare-earth (NRE) magnets and integrating the inverter with the motor could eliminate the use of rare-earth (RE) magnets and reduce copper content, respectively [2]-[5].”
Three-Leg Operation of Back-to-Back Converters
Leontaris, C., de Sousa, G. J. M., & Heldwein, M. L. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3624327
“To achieve that, the power converter itself has to be very efficient and power dense [2].”
Benatti, D., Migliazza, G., Carfagna, E., Immovilli, F., & Lorenzani, E. (2025) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon58223.2025.11221025
“Furthermore, this topology is capable of operating at elevated temperatures, as the passive components in a CSI are generally more temperature-resistant than those found in a VSI [7].”
Dynamic Oil Heating Algorithm for System Aircon Scroll Compressor Inverters
Dianov, A., Sun, X., Tarlavin, N. V., & Xiang, J. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3639058
“The motor sample used in experiments, is a commercial machine, designed by prioritizing efficiency over working cycle, as recommended in [51], [52], and [53].”
Design of an RLC dv/dt Filter for WBG devices enabled Integrated Motor Drives
Dutta, S., & Yadav, A. K. (2025) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet65155.2025.11255340
“This phenomenon increases the voltage stress on the motor windings and accelerates insulation degradation [2], [3].”
Manos, K. (2023) · DSpace - NTUA (National Technical University of Athens) · doi:10.26240/heal.ntua.24638
An Optimal Active Short-Circuit Strategy for Permanent Magnet Synchronous Machines
Wang, W., Chen, A. J., Keim, P. S., & Nøland, J. K. (2026) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3645415
“Other mitigation measures include the use of additional protective devices such as ac circuit breakers and filters [25] and current source converters [3].”
A New LRCC Based $\boldsymbol{dv}/\boldsymbol{dt}$ Filter for Integrated Motor Drive
Dutta, S., & Yadav, A. K. (2026) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2026.3651342
“Their high dv/dt transitions (often exceeding 50–100 kV/ μ s) can induce significant overvoltage stress at the motor terminals due to the reflected wave phenomenon, especially in applications with long cable runs [7].”
Usage of Motor Windings as Oil Preheater for Air Conditioner Compressors
Dianov, A., Sun, X., Demidova, G., Prakht, V., Tarlavin, N. V., & Xiang, J. (2026) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2026.3666225
“The motor used in these experiments was designed using efficiency optimization over the average cycle, using recommendations provided in [47], [48].”
Castellazzi, A., Kazakova, M., Nanayakkara, K. J. A., & Placido, V. Y. V. (2026) · IEEE Electron Devices Technology & Manufacturing Conference (EDTM) · doi:10.1109/edtm65772.2026.11497226
“An alternative class of converters, of great interest for advanced integrated systems, such as, for instance, integrated modular motor drives (IMMDs, [11]) include the current source inverter (CSI), shown in Fig.”
Dutta, S., & Yadav, A. K. (2026) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2026.3691394
A Compact Air‐Cooled Totally‐Enclosed Integrated Motor Drive for Industrial Applications
Joos, Y., Vandenbroeke, F., Sergeant, P., & Vansompel, H. (2026) · IET Electric Power Applications · doi:10.1049/elp2.70204
Multiscale design principles for ultrafast ion-electron synergy in electrochemical filter capacitors
Zhao, Y., Liu, Z., Hu, Y., Cheng, H., Guo, Q., Wang, Z., Wang, M., & Qu, L. (2026) · Joule · doi:10.1016/j.joule.2026.102622
A Framework for the Design of IPMSM Current Controllers
Houmsi, H., Massioni, P., Argomedo, F. B., & Delpoux, R. (2026) · IET Electric Power Applications · doi:10.1049/elp2.70219
Safety and Performance Enhancement Technologies for PMSM-Based Electric Powertrains
Wireko-Brobby, A. (2025) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York)
Metadata
- Authors
- Jahns, T. M., & Sarlioglu, B.
- Affiliations
- University of Wisconsin–Madison (US)
- Honeywell (United States) (US)
- Venue
- IEEE Power Electronics Magazine
- Published
- 2020-09
- Volume
- 7
- Issue
- 3
- Pages
- 18-27
- ISSN
- 2329-9207 (ISSN-L)
- 2329-9215
- OpenAlex
- W3091260680
- Cited by
- 88
- References
- 23
- Citations by year
- 2026: 8 · 2025: 20 · 2024: 16 · 2023: 13 · 2022: 16 · 2021: 14 · 2020: 1
- FWCI
- 3.78
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Power Electronics Magazine (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Power Systems and Control
- Keywords
- integrated motor drive, electric machines, electric vehicle traction drives, power electronic drives, adjustable speed drives, drive efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.