The Incredible Shrinking Motor Drive: Accelerating the Transition to Integrated Motor Drives
The DOI matches its Crossref record; 22 of the 23 references it cites were found in a registry or an index.
Abstract
A technology revolution is unfolding around us as every major mode of transportation is in some stage of electrification, whether on land, sea, or in the air. All of these transportation modes depend on electric machines that play critical roles in both propulsion systems as well as in a wide variety of accessory equipment. Fuel economy and reduced emissions of greenhouse gases and other pollutants are major driving forces for electrified transportation. Despite the significant differences between these varied transportation modes, they all share strong motivations to make their electric machines and adjustable-speed drives smaller, lighter, and more efficient. An excellent example of this trend for the power electronic drives is provided by comparing the drive units in the Tesla S (2012) and Tesla 3 (2017). As shown in the side-by-side views provided in Figure 1, the drive unit shrank in size from an enclosure that matched the size of its main traction motor to a much smaller unit that, at first sight, appears to be a non-descript end-bell attached to one end of the motor. Rather than focusing here on how this impressive reduction in mass and volume was achieved (addressed later in this article), the key point here is that similar technology trends are under way in many of the other transportation modes as well, making electrified transportation increasingly appealing and competitive in the process.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“SiC-based devices are widely adopted in hybrid and electric vehicles traction inverters (Tesla uses SiC transistors since 2017 [15]), while they can also be found in lower volumes in on-board-chargers (OBCs) and traction inverters of hypercars and racing cars.”
From Review and Outlook on GaN and SiC Power Devices: Industrial State-of-the-Art, Applications, and Perspectives (2024) · cites this paper as [15]
Citations
Cites
Transient effects in application of PWM inverters to induction motors
Persson, E. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.158834 · Cited by 445
Transient effects in application of PWM inverters to induction motors
Persson, E. (2002) · Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference · doi:10.1109/papcon.1991.239644 · Cited by 355 · cited 1×
“10 times faster than those of the thyristors and bipolar transistors that they were replacing [10].”
The Past, Present, and Future of Power Electronics Integration Technology in Motor Drives
University of Wisconsin-Madison, & Jahns, T. M. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00019 · Cited by 205 · cited 1×
“This concept of an integrated motor drive (IMD) is contrasted in Figure 2 with conventional adjustable-speed motor drives that dominate commercial production and use today consisting of completely separate enclosures for the drive electronics and the electric machine connected by a power cable [1], [2].”
Self-citationIntegrated motor drives: state of the art and future trends
Abebe, R., Vakil, G., Lo Calzo, G., Cox, T., Lambert, S., Johnson, M., Gerada, C., & Mecrow, B. (2016) · IET Electric Power Applications · doi:10.1049/iet-epa.2015.0506 · Cited by 169 · cited 1×
“This concept of an integrated motor drive (IMD) is contrasted in Figure 2 with conventional adjustable-speed motor drives that dominate commercial production and use today consisting of completely separate enclosures for the drive electronics and the electric machine connected by a power cable [1], [2].”
BackgroundCurrent-Source Converter for AC Motor Drives
Phillips, K. P. (1972) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1972.349851 · Cited by 131 · cited 1×
“, turn off) the previously conducting thyristor each time one of the other two thyristors connected to the same dc bus was triggered [19].”
BackgroundPower Converter Design for an Integrated Modular Motor Drive
Brown, N. R., Jahns, T. M., & Lorenz, R. D. (2007) · 2007 IEEE Industry Applications Annual Meeting · doi:10.1109/07ias.2007.205 · Cited by 120 · cited 1×
“Integrated Modular Motor Drives (IMMDs): A Path to Higher Fault Tolerance Another intriguing extension of the basic IMD concept that has been attracting increased attention from researchers is the Integrated Modular Motor Drive (IMMD), which, as its name implies, adapts the IMD to accentuate its compatibility with hig…”
Self-citationShaping High-Power IGBT Switching Transitions by Active Voltage Control for Reduced EMI Generation
Yang, X., Yuan, Y., Zhang, X., & Palmer, P. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2347578 · Cited by 119 · cited 1×
“An alternative approach is to actively control the gate drive excitation to slow down the voltage transitions in the inverters output waveforms, suppressing the negative effects of the steep voltage wavefronts summarized above [9].”
BackgroundDai, H. J., & Jahns, T. M. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341384 · Cited by 69 · cited 1×
“[12].”
Self-citationCurrent-Source Inverters for Integrated Motor Drives using Wide-Bandgap Power Switches
Torres, R. A., Dai, H. J., Lee, W., Jahns, T. M., & Sarlioglu, B. (2018) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2018.8450127 · Cited by 64 · cited 1×
“WBG-Based Current-Source Inverters One promising approach for addressing the technical challenges associated with WBG switches described above while still taking full advantage of their benefits is to revisit the concept of current-source inverters (CSIs) [11].”
BackgroundSelf-citationHardware integration for an integrated modular motor drive including distributed control
Shea, A., & Jahns, T. M. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6954070 · Cited by 61 · cited 5×
“As a result, if a single PDU fails and takes itself off-line in an IMMD with n PDUs, the remaining ( )n 1- healthy PDUs can continue performing their assigned functions in order to retain ( )/n n1- fractional percent of the IMMD’s original power rating when fully healthy.”
MethodInfluentialSelf-citation
Research works printed but not linked: 3
- dai, 0, High-fidelity modeling and experimental evaluation of WBG two-level voltage-source and current-source inverters with different output cables and filters, Proc IEEE Energy Conversion Congress and Expos
- singh, 0, Silicon carbide inverter technology development A success story
- 10.1109/itec.2018.8450157 · DOI
Cited by
Buffolo, M., Favero, D., Marcuzzi, A., De Santi, C., Meneghesso, G., Zanoni, E., & Meneghini, M. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3346369 · Cited by 476
“SiC-based devices are widely adopted in hybrid and electric vehicles traction inverters (Tesla uses SiC transistors since 2017 [15]), while they can also be found in lower volumes in on-board-chargers (OBCs) and traction inverters of hypercars and racing cars.”
BackgroundAircraft Distributed Electric Propulsion Technologies—A Review
Fard, M. T., He, J., Huang, H., & Cao, Y. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3197332 · Cited by 213
“Each inverter drives a set of three-phase winding [148], [149].”
BackgroundIn-Wheel Motor Drive Systems for Electric Vehicles: State of the Art, Challenges, and Future Trends
Deepak, K., Frikha, M. A., Benômar, Y., Baghdadi, M. E., & Hegazy, O. (2023) · Energies · doi:10.3390/en16073121 · Cited by 153
“According to [75] the latest advancements of wide bandgap semiconductors has improved the power density and ability to withstand higher temperature for elongated time of power electronics modules.”
BackgroundSilicon Carbide Power Devices: Progress and Future Outlook
Baliga, B. J. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3258344 · Cited by 136
“performance voltage source inverters (VSIs) [98].”
A technology overview of thermal management of integrated motor drives – Electrical Machines
Wróbel, R. (2022) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2022.101222 · Cited by 66
Metadata
- Authors
- Jahns, T. M., & Sarlioglu, B.
- Affiliations
- University of Wisconsin–Madison (US)
- Honeywell (United States) (US)
- Venue
- IEEE Power Electronics Magazine
- Published
- 2020-09
- Volume
- 7
- Issue
- 3
- Pages
- 18-27
- ISSN
- 2329-9207 (ISSN-L)
- 2329-9215
- OpenAlex
- W3091260680
- Cited by
- 88
- References
- 23
- Citations by year
- 2026: 8 · 2025: 20 · 2024: 16 · 2023: 13 · 2022: 16 · 2021: 14 · 2020: 1
- FWCI
- 3.78
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Power Electronics Magazine (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Power Systems and Control
- Keywords
- integrated motor drive, electric machines, electric vehicle traction drives, power electronic drives, adjustable speed drives, drive efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.