The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Improving Power Output for Vibration-Based Energy Scavengers
Abstract
Pervasive networks of wireless sensor and communication nodes have the potential to significantly impact society and create large market opportunities. For such networks to achieve their full potential, however, we must develop practical solutions for self-powering these autonomous electronic devices. We've modeled, designed, and built small cantilever-based devices using piezoelectric materials that can scavenge power from low-level ambient vibration sources. Given appropriate power conditioning and capacitive storage, the resulting power source is sufficient to support networks of ultra-low-power, peer-to-peer wireless nodes. These devices have a fixed geometry and - to maximize power output - we've individually designed them to operate as close as possible to the frequency of the driving surface on which they're mounted. In this paper, we describe these devices and present some new designs that can be tuned to the frequency of the host surface, thereby expanding the method's flexibility. We also discuss piezoelectric designs that use new geometries, some of which are microscale (approximately hundreds of microns).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ottman, G. K., Hofmann, H. F., & Lesieutre, G. A. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809379 · Cited by 672
Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations
Roundy, S., Wright, P. K., & Rabaey, J. M. (2012) · CERN Document Server (European Organization for Nuclear Research) · Cited by 552
Self-citationDesign and fabrication of a new vibration-based electromechanical power generator
El-hami, M., Glynne-Jones, P., White, N. M., Hill, M., Beeby, S., James, E., Brown, A. D., & Ross, J. N. (2001) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(01)00569-6 · Cited by 476
Towards a piezoelectric vibration-poweredmicrogenerator
Glynne-Jones, P., Beeby, S. P., & White, N. M. (2001) · IEE Proceedings - Science, Measurement and Technology · doi:10.1049/ip-smt:20010323 · Cited by 354
Toward self-tuning adaptive vibration-based microgenerators
Roundy, S., & Zhang, Y. (2005) · SPIE Proceedings · doi:10.1117/12.581887 · Cited by 219
Self-citationA 300-μm W 1.9-ghz cmos oscillator utilizing micromachined resonators
Otis, B. P., & Rabaey, J. M. (2003) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2003.813219 · Cited by 179
Self-citationMIYAZAKI, M., Tanaka, H., Ono, G., Nagano, T., Ohkubo, N., Kawahara, T., & Yano, K. (2003) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1145/871506.871555 · Cited by 71
Cited by
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
High-Performance Piezoelectric Energy Harvesters and Their Applications
Yang, Z., Zhou, S., Zu, J., & Inman, D. (2018) · Joule · doi:10.1016/j.joule.2018.03.011 · Cited by 1,264
Cook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
A review of piezoelectric energy harvesting based on vibration
Kim, H. S., Kim, J.-H., & Kim, J. (2011) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-011-0151-3 · Cited by 1,121
Metadata
- Authors
- Roundy, S., Leland, E. S., Baker, J., Carleton, E., Reilly, E., Lai, E., Otis, B., Rabaey, J. M., Sundararajan, V., & Wright, P. K.
- Venue
- IEEE Pervasive Computing
- Published
- 2005-01
- Volume
- 4
- Issue
- 1
- Pages
- 28-36
- ISSN
- 1536-1268 (ISSN-L)
- OpenAlex
- W2104567476
- Cited by
- 1,031
- References
- 7
- FWCI
- 86.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.