The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Improving Power Output for Vibration-Based Energy Scavengers
Abstract
Pervasive networks of wireless sensor and communication nodes have the potential to significantly impact society and create large market opportunities. For such networks to achieve their full potential, however, we must develop practical solutions for self-powering these autonomous electronic devices. We've modeled, designed, and built small cantilever-based devices using piezoelectric materials that can scavenge power from low-level ambient vibration sources. Given appropriate power conditioning and capacitive storage, the resulting power source is sufficient to support networks of ultra-low-power, peer-to-peer wireless nodes. These devices have a fixed geometry and - to maximize power output - we've individually designed them to operate as close as possible to the frequency of the driving surface on which they're mounted. In this paper, we describe these devices and present some new designs that can be tuned to the frequency of the host surface, thereby expanding the method's flexibility. We also discuss piezoelectric designs that use new geometries, some of which are microscale (approximately hundreds of microns).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ottman, G. K., Hofmann, H. F., & Lesieutre, G. A. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809379 · Cited by 672
Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations
Roundy, S., Wright, P. K., & Rabaey, J. M. (2012) · CERN Document Server (European Organization for Nuclear Research) · Cited by 552
Self-citationDesign and fabrication of a new vibration-based electromechanical power generator
El-hami, M., Glynne-Jones, P., White, N. M., Hill, M., Beeby, S., James, E., Brown, A. D., & Ross, J. N. (2001) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(01)00569-6 · Cited by 476
Towards a piezoelectric vibration-poweredmicrogenerator
Glynne-Jones, P., Beeby, S. P., & White, N. M. (2001) · IEE Proceedings - Science, Measurement and Technology · doi:10.1049/ip-smt:20010323 · Cited by 354
Toward self-tuning adaptive vibration-based microgenerators
Roundy, S., & Zhang, Y. (2005) · SPIE Proceedings · doi:10.1117/12.581887 · Cited by 219
Self-citationA 300-μm W 1.9-ghz cmos oscillator utilizing micromachined resonators
Otis, B. P., & Rabaey, J. M. (2003) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2003.813219 · Cited by 179
Self-citationMIYAZAKI, M., Tanaka, H., Ono, G., Nagano, T., Ohkubo, N., Kawahara, T., & Yano, K. (2003) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1145/871506.871555 · Cited by 71
Cited by
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
High-Performance Piezoelectric Energy Harvesters and Their Applications
Yang, Z., Zhou, S., Zu, J., & Inman, D. (2018) · Joule · doi:10.1016/j.joule.2018.03.011 · Cited by 1,264
Cook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
A review of piezoelectric energy harvesting based on vibration
Kim, H. S., Kim, J.-H., & Kim, J. (2011) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-011-0151-3 · Cited by 1,121
Nanotechnology‐Enabled Energy Harvesting for Self‐Powered Micro‐/Nanosystems
Wang, Z. L., & Wu, W. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201656 · Cited by 1,063
Dye-sensitized solar cells for efficient power generation under ambient lighting
Freitag, M., Teuscher, J., Saygili, Y., Zhang, X., Giordano, F., Liska, P., Hua, J., Zakeeruddin, S. M., Moser, J.-E., Grätzel, M., et al. (2017) · Nature Photonics · doi:10.1038/nphoton.2017.60 · Cited by 1,041
Stanton, S. C., McGehee, C. C., & Mann, B. P. (2010) · Physica D: Nonlinear Phenomena · doi:10.1016/j.physd.2010.01.019 · Cited by 983
A comprehensive review on vibration energy harvesting: Modelling and realization
Wei, C., & Jing, X. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.073 · Cited by 952
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Advances in energy harvesting using low profile piezoelectric transducers
Priya, S. (2007) · Journal of Electroceramics · doi:10.1007/s10832-007-9043-4 · Cited by 918
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“Using beams with nonrectangular profiles, such as triangle-shaped beams [148, 149] (figure 3(b)) and trapezoidal cross section beams [150], the”
BackgroundAnalysis of power output for piezoelectric energy harvesting systems
Shu, Y. C., & Lien, I. C. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/001 · Cited by 737
Flexible Nanocomposite Generator Made of BaTiO3 Nanoparticles and Graphitic Carbons
Park, K., Lee, M., Liu, Y., Moon, S., Hwang, G., Zhu, G., Kim, J. E., Kim, S. O., Kim, D. K., Wang, Z. L., et al. (2012) · Advanced Materials · doi:10.1002/adma.201200105 · Cited by 711
Energy harvesting from low frequency applications using piezoelectric materials
Li, H., Tian, C., & Deng, Z. D. (2014) · Applied Physics Reviews · doi:10.1063/1.4900845 · Cited by 705
A vibration energy harvesting device with bidirectional resonance frequency tunability
Challa, V. R., Prasad, M. G., Shi, Y., & Fisher, F. T. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/01/015035 · Cited by 675
Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art
Khaligh, A., Zeng, P., & Zheng, C. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024652 · Cited by 669
Body Area Sensor Networks: Challenges and Opportunities
Hanson, M. A., Powell, H. C., Barth, A. T., Ringgenberg, K., Calhoun, B. H., Aylor, J. H., & Lach, J. (2009) · Computer · doi:10.1109/mc.2009.5 · Cited by 555
A review of vibration-based MEMS piezoelectric energy harvesters
Saadon, S., & Sidek, O. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.07.024 · Cited by 509
Solar energy: Trends and enabling technologies
Devabhaktuni, V., Alam, M., Shekara Sreenadh Reddy Depuru, S., Green, R. C., Nims, D., & Near, C. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.024 · Cited by 503
Piezoelectric nanogenerators—Harvesting ambient mechanical energy at the nanometer scale
Wang, X. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.09.001 · Cited by 497
Leland, E. S., & Wright, P. K. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/5/030 · Cited by 496
Self-citationConverting Biomechanical Energy into Electricity by a Muscle-Movement-Driven Nanogenerator
Yang, R., Qin, Y., Li, C., Zhu, G., & Wang, Z. L. (2009) · Nano Letters · doi:10.1021/nl803904b · Cited by 491
Reversible hysteresis for broadband magnetopiezoelastic energy harvesting
Stanton, S. C., McGehee, C. C., & Mann, B. P. (2009) · Applied Physics Letters · doi:10.1063/1.3253710 · Cited by 484
A MEMS-based piezoelectric power generator array for vibration energy harvesting
Liu, J.-Q., Fang, H.-B., Xu, Z.-Y., Mao, X.-H., Shen, X.-C., Chen, D., Liao, H., & Cai, B.-C. (2008) · Microelectronics Journal · doi:10.1016/j.mejo.2007.12.017 · Cited by 481
Fang, H.-B., Liu, J.-Q., Xu, Z.-Y., Dong, L., Wang, L., Chen, D., Cai, B.-C., & Liu, Y. (2006) · Microelectronics Journal · doi:10.1016/j.mejo.2006.07.023 · Cited by 479
Buck-Boost Converter for Sensorless Power Optimization of Piezoelectric Energy Harvester
Lefeuvre, E., Audigier, D., Richard, C., & Guyomar, D. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904230 · Cited by 439
Tan, Y. K., & Panda, S. K. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2102321 · Cited by 418
Piezoelectric energy harvesting: State-of-the-art and challenges
Toprak, A., & Tigli, O. (2014) · Applied Physics Reviews · doi:10.1063/1.4896166 · Cited by 417
Hu, Y., & Wang, Z. L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.038 · Cited by 413
Shen, D., Park, J.-H., Ajitsaria, J., Choe, S.-Y., Wikle, H. C., & Kim, D.-J. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/5/055017 · Cited by 407
An electromagnetic micro power generator for wideband environmental vibrations
Sari, I., Balkan, T., & Kulah, H. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2007.11.021 · Cited by 405
Group III nitride and SiC based MEMS and NEMS: materials properties, technology and applications
Cimalla, V, Pezoldt, J., & Ambacher, O. (2007) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/40/20/s19 · Cited by 392
Piezoelectric Energy Harvesting Solutions
Caliò, R., Rongala, U., Camboni, D., Milazzo, M., Stefanini, C., De Petris, G., & Oddo, C. (2014) · Sensors · doi:10.3390/s140304755 · Cited by 390
Electromagnetic energy harvesting from vibrations of multiple frequencies
Yang, B., Lee, C., Xiang, W., Xie, J., Han He, J., Kotlanka, R. K., Low, S. P., & Feng, H. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/3/035001 · Cited by 384
Liu, H., Tay, C. J., Quan, C., Kobayashi, T., & Lee, C. (2011) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2011.2162488 · Cited by 361
Co-Design of a CMOS Rectifier and Small Loop Antenna for Highly Sensitive RF Energy Harvesters
Stoopman, M., Keyrouz, S., Visser, H. J., Philips, K., & Serdijn, W. A. (2014) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2014.2302793 · Cited by 343
Comparison of energy harvesting systems for wireless sensor networks
Gilbert, J. M., & Balouchi, F. (2008) · International Journal of Automation and Computing · doi:10.1007/s11633-008-0334-2 · Cited by 337
Energy autonomous electronic skin
García Núñez, C., Manjakkal, L., & Dahiya, R. (2019) · npj Flexible Electronics · doi:10.1038/s41528-018-0045-x · Cited by 332
“Mechanical vibrations available in the ambient have wide range of frequencies, from few Hz (human steps, human heartbeat rate, and sea water waves) to several kHz (mechanical engines), and can produce energy in a wide range of few hundreds μWcm to mWcm.(94) Mechanical energy is helpful to ensure the continuous operati…”
BackgroundAn improved analysis of the SSHI interface in piezoelectric energy harvesting
Shu, Y. C., Lien, I. C., & Wu, W. J. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/6/028 · Cited by 324
Efficiency of energy conversion for a piezoelectric power harvesting system
Shu, Y. C., & Lien, I. C. (2006) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/16/11/026 · Cited by 310
On thermoelectric and pyroelectric energy harvesting
Sebald, G., Guyomar, D., & Agbossou, A. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/12/125006 · Cited by 305
Piezoelectric energy harvesters for biomedical applications
Ali, F., Raza, W., Li, X., Gul, H., & Kim, K.-H. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.012 · Cited by 300
A Design Methodology for Switched-Capacitor DC-DC Converters
Seeman, M. D. (2009) · doi:10.21236/ada538398 · Cited by 297
Ultralow-Power Electronics for Biomedical Applications
Chandrakasan, A. P., Verma, N., & Daly, D. C. (2008) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.10.061807.160547 · Cited by 285
Pyroelectric energy conversion: Optimization principles
Sebald, G., Lefeuvre, E., & Guyomar, D. (2008) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2008.680 · Cited by 274
Energy Harvesting From Piezoelectric Materials Fully Integrated in Footwear
Rocha, J. G., Goncalves, L. M., Rocha, P. F., Silva, M. P., & Lanceros-Mendez, S. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2028360 · Cited by 273
AlN piezoelectric thin films for energy harvesting and acoustic devices
Fei, C., Liu, X., Zhu, B., Li, D., Yang, X., Yang, Y., & Zhou, Q. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.062 · Cited by 262
Micromachined PZT cantilever based on SOI structure for low frequency vibration energy harvesting
Shen, D., Park, J.-H., Noh, J. H., Choe, S.-Y., Kim, S.-H., Wikle, H. C., & Kim, D.-J. (2009) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2009.06.007 · Cited by 260
Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation
Ajitsaria, J., Choe, S. Y., Shen, D., & Kim, D. J. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/2/024 · Cited by 258
Designing and manufacturing a piezoelectric tile for harvesting energy from footsteps
Hwang, S. J., Jung, H. J., Kim, J. H., Ahn, J. H., Song, D., Song, Y., Lee, H. L., Moon, S. P., Park, H., & Sung, T. H. (2015) · Current Applied Physics · doi:10.1016/j.cap.2015.02.009 · Cited by 92
Energy harvesting with piezoelectric materials for IoT – Review
Covaci, C., & Gontean, A. (2019) · ITM Web of Conferences · doi:10.1051/itmconf/20192903010 · Cited by 5
PIEZOELECTRIC ENERGY HARVESTING USING FOOTSTEPS
Withana, A., Samarakoon, S., Amarasuriya, H., Peiris, B., & Lucas, R. (2023) · Journal of Advances in Engineering · doi:10.64701/joae/345/8722
Metadata
- Authors
- Roundy, S., Leland, E. S., Baker, J., Carleton, E., Reilly, E., Lai, E., Otis, B., Rabaey, J. M., Sundararajan, V., & Wright, P. K.
- Venue
- IEEE Pervasive Computing
- Published
- 2005-01
- Volume
- 4
- Issue
- 1
- Pages
- 28-36
- ISSN
- 1536-1268 (ISSN-L)
- OpenAlex
- W2104567476
- Cited by
- 1,031
- References
- 7
- FWCI
- 86.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.