CoChat

NPC assessment in insulated DC/DC converter topologies using SiC MOSFETs for Power Electronic Traction Transformer

Open access
Stackler, Caroline, Fouineau, Alexis, Ladoux, Philippe, Morel, Florent, Wallart, Francois, Dworakowski, Piotr, Evans, Nathan · 2019 · 2019 20th International Symposium on Power Electronics (Ee)

The DOI matches its Crossref record; 14 of the 18 references it cites were found in a registry or an index.

Abstract

Power electronic traction transformers (PETT) are multilevel AC/DC on-board converters, studied for railway applications to replace traditional solution with low frequency transformers. This paper focuses on the insulated DC/DC converter in a PETT. Three variants of resonant single active bridges (R-SAB) with 3-level NPC primaries are optimised to maximise the efficiency, under mass and dimension constraints. They are sized and compared for a 2 MW PETT on a 15 kV/16.7 Hz railway infrastructure, using 3.3 kV SiC MOSFETs and nanocrystalline C-core transformers with cast resin insulation and forced air cooling. The highest efficiency at nominal power, 99.17 %, is reached for a configuration with a 3-level full bridge NPC primary, a 2-level full bridge secondary, and a 32.1 L/49.1 kg transformer operating at 6 kHz.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/pee.2019.8923456

Cites

14 of 14 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 2

  1. yamada, 2018, Gaining speed: Mitsubishi electric SiC-power modules, Mitsubishi Electric Technology Report
  2. akli, 0, Challenges and interests of e-transformer in railway traction system, ECPE Workshop New Technologies for Medium-Frequency Solid-State Transformers

Cited by

See all 4

Metadata

Authors
Stackler, C., Fouineau, A., Ladoux, P., Morel, F., Wallart, F., Dworakowski, P., & Evans, N.
Affiliations
  • Laboratoire Plasma et Conversion d'Energie (FR)
  • Lyon 1 Université (FR)
  • Centre National de la Recherche Scientifique (FR)
  • Supergrid Institute (FR)
Venue
2019 20th International Symposium on Power Electronics (Ee)
Publisher
IEEE
Published
2019-10
Pages
1-6
OpenAlex
W2993333747
Cited by
3
References
18
Citations by year
2024: 1 · 2022: 1 · 2020: 1
FWCI
0.80
Type
conference paper
Language
en
Open access
Locations
  • International Symposium on Power Electronics (Ee) (publishedVersion)
  • HAL (submittedVersion, other-oa)
Funders
Agence Nationale de la Recherche (ANR-10-IEED-0005)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
Keywords
neutral point clamped topology, SiC MOSFET, multilevel converters, railway traction, transformer sizing, forced air cooling

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.