The DOI matches its Crossref record.
A bi-directional DC-DC converter topology for low power application
Abstract
This paper presents a bi-directional DC-DC converter for use in low power applications. The proposed topology is based on a half-bridge on the primary and a current fed push-pull on the secondary side of a high frequency isolation transformer. Achieving bi-directional flow of power using the same power components provides a simple, efficient and galvanically isolated topology that is specially attractive for use in battery charge/discharge circuits in DC UPS. In the presence of the DC mains (provided by the AC mains), the converter essentially operates in the buck mode to power the load and charge the battery. On failure of the DC mains, operation is comparable to that of a boost converter and the battery supplies the load power. Small signal and steady state analyses are presented for this specific application. Design guidelines for a laboratory prototype are included. Experimental results validate and evaluate the proposed topology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
A Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909248 · Cited by 780
Operation, design and control of dual H-bridge-based isolated bidirectional DC–DC converter
Mi, C., Bai, H., Wang, C., & Gargies, S. (2008) · IET Power Electronics · doi:10.1049/iet-pel:20080004 · Cited by 405
A bidirectional DC–DC converter for fuel cell electric vehicle driving system
Chiu, H.-J., & Lin, L.-W. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.876863 · Cited by 327
A natural ZVS medium-power bidirectional DC-DC converter with minimum number of devices
Li, H., Peng, F. Z., & Lawler, J. S. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808965 · Cited by 296
Metadata
- Authors
- Jain, M., Jain, P. K., & Daniele, M.
- Venue
- PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972
- Publisher
- IEEE
- Published
- 2002-11-22
- Volume
- 1
- Pages
- 804-810
- ISSN
- 0275-9306 (ISSN-L)
- OpenAlex
- W3147567736
- Cited by
- 205
- References
- 0
- FWCI
- 7.48
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A bi-directional DC-DC converter topology for low power application. https://app.cochat.ai/papers/10.1109/pesc.1997.616811
- The paper
- Jain, M., Jain, P. K., & Daniele, M. (2002). A bi-directional DC-DC converter topology for low power application. PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972. https://doi.org/10.1109/pesc.1997.616811
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.