Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.

A novel folded litz ribbon cable for magnetic components

Glaser, John S., de Rooij, Michael A. · 2006 · 2006 37th IEEE Power Electronics Specialists Conference

Abstract

This paper describes the construction of a thin, flat litz ribbon cable suitable for use in magnetic components such as inductors and transformers where one requires reduced AC losses compared to conventional solid conductor ribbon conductors. This conductor has the potential for ease of manufacture and low cost compared to current solutions such as a braided litz cable. Since a 1-D analysis does not accurately model ribbon conductors, a simplified 2-D analysis is developed. Test inductors have been constructed using both a conventional solid copper ribbon cable and the new ribbon litz cable. Measured results are compared to both 1-D and 2-D analyses, and it is shown that the 2-D analysis provides a more accurate result. The experimental results indicate that the new folded litz cable has lower total losses over a relatively wide frequency range compared to the solid conductor ribbon cable of similar cross-sectional area.

Overview

Integrity signals

Registry

Crossref · 10.1109/pesc.2006.1712225

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 13 references

Research works printed but not linked: 5

  1. glaser, 2006, Method of Making Electrical Cable
  2. 0, Scilab
  3. wang, 2003, Modeling of Skin-and Proximity Effect Losses in Foils and in Planar Litz Windings, Annual Seminar of Center for Power Electronic Systems, 182
  4. de rooij, 2003, Planar Litz - A Method to Reduce High Frequency Conduction Losses in Integrated Components, CPES Annual Seminar
  5. glaser, 2004, Method of Making Electrical Cable

Cited by

Metadata

Authors
Glaser, J. S., & de Rooij, M. A.
Affiliations
  • General Electric (United States) (US)
  • General Electric Global Research, 1 Research Circle Niskayuna, NY 12309 USA
Venue
2006 37th IEEE Power Electronics Specialists Conference
Publisher
IEEE
Published
2006-06
Pages
1-8
ISSN
0275-9306 (ISSN-L)
OpenAlex
W1834581926
Cited by
9
References
13
Citations by year
2020: 1 · 2017: 1 · 2014: 1 · 2013: 1
FWCI
1.59
Type
conference paper
Language
en
Open access
closed
Locations
IEEE Power Electronics Specialists Conference (PESC) (publishedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Electromagnetic Compatibility and Noise Suppression
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
Keywords
Litz wire, ribbon cable, AC loss, inductors, transformer models, magnetic components, conductor design

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.