The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Electrical battery model for use in dynamic electric vehicle simulations
Abstract
Simulation of electric vehicles, hybrid electric vehicles, and plug-in hybrid electric vehicles over driving schedules within a full dynamic hybrid and electric vehicle simulator requires battery models capable of predicting state-of-charge, I-V characteristics, and dynamic behavior of different battery types. A battery model capable of reproducing lithium-ion, nickel-metal hydride, and lead- acid I-V characteristics (with minimal model alterations) is proposed. A battery-testing apparatus was designed to measure the proposed parameters of the battery model for all three battery types and simulate driving schedules with a programmed source and load configuration. A multiple time-constant battery model was used for modeling lithium- ion batteries; verification of time constants in the seconds to minutes and hour ranges has been shown in numerous research articles and a time constant in the millisecond range is verified here with experiments. Lack of significant time constants in the millisecond range is validated through direct testing. A modeled capacity-rate effect within the state-of-charge determination portion of the proposed model is verified experimentally to ensure accurate prediction of battery state of charge after lengthy driving schedules. The battery model was programmed into a Matlab/Simulink environment and used as a power source for plug-in hybrid electric vehicle simulations. Results from simulations of lithium-ion battery packs show that the proposed battery model behaves well with the other subcomponents of the vehicle simulator; accuracy of the model and prediction of battery internal losses depends on the extent of tests performed on the battery used for the simulation. Extraction of model parameters and their dependence on temperature and cycle number is ongoing, as well as validation of the Simulink model with hardware- in-the-loop "driving schedule" cycling of real batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Accurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427
Dynamic lithium-ion battery model for system simulation
Gao, L., Liu, S., & Dougal, R. A. (2002) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2002.803653 · Cited by 794
Wipke, K. B., Cuddy, M. R., & Burch, S. D. (1999) · IEEE Transactions on Vehicular Technology · doi:10.1109/25.806767 · Cited by 711
Rapid test and non-linear model characterisation of solid-state lithium-ion batteries
Abu-Sharkh, S., & Doerffel, D. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.001 · Cited by 366
Mathematical modeling of lithium-ion and nickel battery systems
Gomadam, P. M., Weidner, J. W., Dougal, R. A., & White, R. E. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00190-8 · Cited by 344
Modeling of lithium-ion batteries
Newman, J., Thomas, K. E., Hafezi, H., & Wheeler, D. R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00282-9 · Cited by 334
Buller, S., Thele, M., De Doncker, R. W., & Karden, E. (2004) · 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003. · doi:10.1109/ias.2003.1257769 · Cited by 323
Modeling of lithium ion cells?A simple equivalent-circuit model approach
YANNLIAW, B. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.09.049 · Cited by 319
Modeling of high power automotive batteries by the use of an automated test system
Schweighofer, B., Raab, K. M., & Brasseur, G. (2003) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2003.814827 · Cited by 306
Electrochemical-Thermal Model of Lithium Polymer Batteries
Song, L., & Evans, J. W. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393490 · Cited by 252
Cited by
Hannan, M. A., Lipu, M. S. H., Hussain, A., & Mohamed, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.001 · Cited by 2,005
A review on electric vehicle battery modelling: From Lithium-ion toward Lithium–Sulphur
Fotouhi, A., Auger, D. J., Propp, K., Longo, S., & Wild, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.009 · Cited by 780
Lipu, M. S. H., Hannan, M. A., Hussain, A., Hoque, M. M., Ker, P. J., Saad, M. H. M., & Ayob, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.065 · Cited by 755
Battery Energy Storage System (BESS) and Battery Management System (BMS) for Grid-Scale Applications
Lawder, M. T., Suthar, B., Northrop, P. W. C., De, S., Hoff, C. M., Leitermann, O., Crow, M. L., Santhanagopalan, S., & Subramanian, V. R. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2317451 · Cited by 713
Seaman, A., Dao, T.-S., & McPhee, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.057 · Cited by 453
Metadata
- Authors
- Kroeze, R. C., & Krein, P. T.
- Venue
- 2008 IEEE Power Electronics Specialists Conference
- Publisher
- IEEE
- Published
- 2008-06
- Pages
- 1336-1342
- ISSN
- 0275-9306 (ISSN-L)
- OpenAlex
- W2112643767
- Cited by
- 325
- References
- 18
- FWCI
- 28.12
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrical battery model for use in dynamic electric vehicle simulations. https://app.cochat.ai/papers/10.1109/pesc.2008.4592119
- The paper
- Kroeze, R. C., & Krein, P. T. (2008). Electrical battery model for use in dynamic electric vehicle simulations. 2008 IEEE Power Electronics Specialists Conference. https://doi.org/10.1109/pesc.2008.4592119
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.