Ball control in high-speed batting motion using hybrid trajectory generator
The DOI matches its Crossref record; 7 of the 9 references it cites were found in a registry or an index.
Abstract
Speeding up robot motion provides not only improvement in operating efficiency but also improves dexterous manipulation by taking advantage of an unstable state or noncontact state. In this paper we describe a hybrid trajectory generator that produces high-speed manipulation. This algorithm produces both mechanical high-speed motion and sensor-based reactive motion. As an example of high-speed manipulation, a robotic ball control in a batting task has been achieved. Performance evaluation is also analyzed
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Development of an ultrahigh speed robot FALCON using wire drive system
Kawamura, S., Choe, W., Tanaka, S., & Pandian, S. R. (2002) · Proceedings of 1995 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1995.525288 · Cited by 334
Planning and Control of Robotic Juggling and Catching Tasks
Buehler, M., Koditschek, D. E., & Kindlmann, P. J. (1994) · The International Journal of Robotics Research · doi:10.1177/027836499401300201 · Cited by 227
1 ms column parallel vision system and its application of high speed target tracking
Nakabo, Y., Ishikawa, M., Toyoda, H., & Mizuno, S. (2002) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.2000.844126 · Cited by 141
Self-citationMason, M. T., & Lynch, K. M. (2002) · Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93) · doi:10.1109/iros.1993.583093 · Cited by 137
High-speed batting using a multi-jointed manipulator
Senoo, T., Namiki, A., & Ishikawa, M. (2004) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.2004.1307986 · Cited by 86
Self-citationThe 100 G capturing robot - too fast to see
Kaneko, M., Higashimori, M., Takenaka, R., Namiki, A., & Ishikawa, M. (2003) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2003.809137 · Cited by 79
Self-citationNamiki, A., & Ishikawa, M. (2001) · Cited by 11
Self-citation
Research works printed but not linked: 1
- nakabo, 2000, 1ms column parallel vision system and it's application of high speed target tracking, Proc IEEE Int Conf on Robotics and Automation, 650
Cited by
Kim, S., Shukla, A., & Billard, A. (2014) · IEEE Transactions on Robotics · doi:10.1109/tro.2014.2316022 · Cited by 220
Movement templates for learning of hitting and batting
Kober, J., Mülling, K., Krömer, O., Lampert, C. H., Schölkopf, B., & Peters, J. (2010) · 2010 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.2010.5509672 · Cited by 152
“[19] who used a 4 DoF WAM arm in a manually coded high speed setting), and previous work in table tennis (which had only low-inertia, was overpowered and had mostly prismatic joints [20]–[22]), we use a full seven degrees of freedom revolutionary joint robot and, thus, have to deal with larger inertia as the wrist add…”
MethodResultNonprehensile Dynamic Manipulation: A Survey
Ruggiero, F., Lippiello, V., & Siciliano, B. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2801939 · Cited by 147
Learning motor skills: from algorithms to robot experiments
Kober, J. (2014) · it - Information Technology · doi:10.1515/itit-2014-1039 · Cited by 157
Learning to Play Table Tennis From Scratch Using Muscular Robots
Büchler, D., Guist, S., Calandra, R., Berenz, V., Schölkopf, B., & Peters, J. (2022) · IEEE Transactions on Robotics · doi:10.1109/tro.2022.3176207 · Cited by 107
Metadata
- Authors
- Senoo, T., Namiki, A., & Ishikawa, M.
- Affiliations
- The University of Tokyo (JP)
- Venue
- Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006.
- Publisher
- IEEE
- Published
- 2006-07-10
- Pages
- 1762-1767
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2166950571
- Cited by
- 77
- References
- 9
- Citations by year
- 2025: 1 · 2024: 4 · 2023: 2 · 2022: 2 · 2021: 8 · 2020: 5 · 2019: 6 · 2018: 5 · 2017: 5 · 2016: 5 · 2015: 3 · 2014: 9 · 2013: 1 · 2012: 5
- FWCI
- 3.74
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Proceedings - IEEE International Conference on Robotics and Automation/Proceedings (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Robot Manipulation and Learning
- Physical Sciences › Engineering › Control and Systems Engineering › Robotic Mechanisms and Dynamics
- Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- Keywords
- ball control, unstable states, non-contact manipulation, dexterous manipulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.