The DOI matches its Crossref record; 48 of the 52 references it cites were found in a registry or an index; 18 of the 25 sources its claims cite were checked for support.
Catching Objects in Flight
Open accessAbstract
We address the difficult problem of catching in-flight objects with uneven shapes. This requires the solution of three complex problems: accurate prediction of the trajectory of fastmoving objects, predicting the feasible catching configuration, and planning the arm motion, and all within milliseconds. We follow a programming-by-demonstration approach in order to learn, from throwing examples, models of the object dynamics and arm movement. We propose a new methodology to find a feasible catching configuration in a probabilistic manner. We use the dynamical systems approach to encode motion from several demonstrations. This enables a rapid and reactive adaptation of the arm motion in the presence of sensor uncertainty. We validate the approach in simulation with the iCub humanoid robot and in real-world experiments with the KUKA LWR 4+ (7-degree-of-freedom arm robot) to catch a hammer, a tennis racket, an empty bottle, a partially filled bottle, and a cardboard box.
Overview
CoChat Summary
## TL;DR
This paper presents a real-time robot-catching framework that learns object flight dynamics and feasible grasping/reachability from demonstrations, then combines them to predict where and when to catch in-flight objects. It is validated in iCub simulation and on a KUKA LWR 4+ with an Allegro hand, achieving 100% success in simulation and 73.2% in real-world trials.
## Key findings
- The paper reports a 100% success rate for catching two objects in iCub simulation, based on 50 throws; 3 of 50 throws were excluded because they did not enter the robot’s reachable space.
- In real-robot experiments, the system caught 52 out of 71 total trials, yielding a 73.2% success rate; 9 of 80 throws were excluded because they never entered reachable space.
- The system predicts the best catching configuration in about 0.2 ms on a 2.7-GHz quad-core PC, enabling real-time replanning.
- For the real robot, the paper reports mean flying time across all trials of 4.97 ± 0.46 s, and the model predicts trajectories better than a rigid-body model, especially for the partially filled bottle.
## Methods
- The framework has two iterative threads: one continuously predicts object trajectory and updates the best catching configuration and timing; the other adapts arm and finger motion to the updated target.
- Object dynamics are learned from demonstrations using support vector regression with an RBF kernel and coupled with an EKF for noisy sensing; the paper states the model uses about 20 throwing examples per object.
- Graspable space and reachable space are each modeled as Gaussian mixture models, with the optimal catching posture found by maximizing the joint probability of the combined models; arm/hand motion is generated using coupled dynamical systems (CDS) and a timing controller.
- Validation uses iCub simulation with a hammer and tennis racket, and a KUKA LWR 4+ with Allegro hand in real-world experiments on an empty bottle, partially filled bottle, tennis racket, and cardboard box.
## Limitations
- The paper states that the trajectory model is local: if an object is thrown very differently from the demonstrations, prediction can become inaccurate, especially for highly nonlinear motions such as a partially filled bottle.
- The authors say they do not explicitly compute collisions between the object and the hand/arm before catching; they use heuristics instead, and this leads to some failures.
- They state they model only task dynamics, not robot dynamics, so some generated trajectories produce velocities the robot cannot follow.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
14 Valid · 9 Not valid · 2 Not checked · 81 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“Note that this does not require any prior information on the physical properties of the object, such as its mass, position of COM, and moment of inertia.”
What the sources say
- Supportedcites [22] [22] S. Kim and A. Billard, 'Estimating the non-linear dynamics of free-flying objects,' Robot. Auton. Syst. , vol. 60, no. 9, pp. 1108-1122, 2012. - source
Section 2.4 says the DS encoding learns from observed motion without prior information about physical properties such as mass, and that the approach makes no assumption about the center-of-mass position. The passage labeled Table 11 contrasts it with conventional techniques that require properties such as moment of inertia. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In our previous work [22], we learned from demonstrations the dynamics of more complex objects whose shapes are arbitrary, nonrigid, or their points of interest are not at the COM.”
What the sources say
- Partly supportedcites [22] [22] S. Kim and A. Billard, 'Estimating the non-linear dynamics of free-flying objects,' Robot. Auton. Syst. , vol. 60, no. 9, pp. 1108-1122, 2012. - sourceExperimental — accuracy not yet measured
The Introduction describes learning motion dynamics from human throwing demonstrations, and Section 2.4 says the method handles arbitrarily shaped objects and points away from the center of mass. Section 4.1.1 also studies a half-filled bottle whose moment of inertia changes in flight, but our copy does not establish that the method was applied to nonrigid objects themselves. (LLM, conf=0.84)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In [38], we show that modeling arm and hand motion through coupled dynamical systems (CDS) is advantageous over the classic approaches reviewed previously.”
What the sources say
- Partly supportedcites [38] [38] A. Shukla and A. Billard, 'Coupled dynamical system based armhand grasping model for learning fast adaptation strategies,' Robot. Auton. Syst. , vol. 60, no. 3, pp. 424-440, 2012. - sourceExperimental — accuracy not yet measured
The Conclusion and discussion says that explicit coupling of hand and finger motion was advantageous over implicit coupling learned with other density-based methods. Section 4.3.1 illustrates that advantage against a single-GMM approach. The paper does not establish an advantage over classic approaches generally, as the citing sentence suggests. (LLM, conf=0.78)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Such a spatial coupling between hand and fingers ensures timely closure of the fingers while following the learned dynamics as closely as possible, even in the presence of arbitrary perturbations.”
What the sources say
- Partly supportedcites [38] [38] A. Shukla and A. Billard, 'Coupled dynamical system based armhand grasping model for learning fast adaptation strategies,' Robot. Auton. Syst. , vol. 60, no. 3, pp. 424-440, 2012. - sourceExperimental — accuracy not yet measured
Section 4.3.1 reports that explicit coupling delays finger closure after a target switch and produces a successful grasp; Section 4.2.2 says finger trajectories resume the unperturbed motion model after perturbation. The claim overextends these results to arbitrary perturbations: Section 5.1 notes that perturbations far from demonstrated motions may yield infeasible robot motions, and the experiments stayed within the center of the robot’s workspace. Page numbers are not available in our copy. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“This offers a robust and fast control of the complete hand-arm system without resorting to extensive parameter tuning.”
What the sources say
- Supportedcites [38] [38] A. Shukla and A. Billard, 'Coupled dynamical system based armhand grasping model for learning fast adaptation strategies,' Robot. Auton. Syst. , vol. 60, no. 3, pp. 424-440, 2012. - source
Section 4.3 reports robust reach-and-grasp control and rapid adaptation to perturbations; Section 4.1 says the implementation controls the arm and finger joints together. Sections 4.2.3 and 5.1 describe just two free parameters that can be inferred from human data and call the parameterization simple and explicit, supporting the claim that extensive tuning is unnecessary—not that no tuning occurs. Page numbers are unavailable in our copy. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
50 more claims · 5 with their cited sources checked
Create a free account to see all 106 claims and every source verdict.
- It may state two separate claims as one. 31
- Probably not a substantial claim. 22
- The quote only partly states this claim. 4
Citations
Cites
Maximum Likelihood from Incomplete Data Via the EM Algorithm
Dempster, A. P., Laird, N. M., & Rubin, D. B. (1977) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.2517-6161.1977.tb01600.x · Cited by 50,444
Estimating the Dimension of a Model
Schwarz, G. (1978) · The Annals of Statistics · doi:10.1214/aos/1176344136 · Cited by 47,033
LIBSVM: A library for support vector machines
Chang, C.-C., & Lin, C.-J. (2011) · ACM Transactions on Intelligent Systems and Technology · doi:10.1145/1961189.1961199 · Cited by 40,918
On Learning, Representing, and Generalizing a Task in a Humanoid Robot
Calinon, S., Guenter, F., & Billard, A. (2007) · IEEE Transactions on Systems, Man and Cybernetics, Part B (Cybernetics) · doi:10.1109/tsmcb.2006.886952 · Cited by 1,090
Self-citationLearning Stable Nonlinear Dynamical Systems With Gaussian Mixture Models
Khansari-Zadeh, S. M., & Billard, A. (2011) · IEEE Transactions on Robotics · doi:10.1109/tro.2011.2159412 · Cited by 771
Self-citationCapturing robot workspace structure: representing robot capabilities
Zacharias, F., Borst, C., & Hirzinger, G. (2007) · 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2007.4399105 · Cited by 269
A dynamical system approach to realtime obstacle avoidance
Khansari-Zadeh, S. M., & Billard, A. (2012) · Autonomous Robots · doi:10.1007/s10514-012-9287-y · Cited by 264 · cited 1×
“In Section III, we validate the method in simulation by using the iCub simulator, and in a real robot by using the LWR 4+. Section IV concludes with a summary of remaining issues that will be addressed in future work.”
MethodSelf-citationWorkspaces of planar parallel manipulators
Merlet, J.-P., Gosselin, C. M., & Mouly, N. (1998) · Mechanism and Machine Theory · doi:10.1016/s0094-114x(97)00025-6 · Cited by 240
Planning and Control of Robotic Juggling and Catching Tasks
Buehler, M., Koditschek, D. E., & Kindlmann, P. J. (1994) · The International Journal of Robotics Research · doi:10.1177/027836499401300201 · Cited by 227
Kyriakopoulos, K. J., & Saridis, G. N. (2003) · Proceedings. 1988 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1988.12075 · Cited by 212
Research works printed but not linked: 1
- schaal, 0, Programmable pattern generators, Proc Int Conf Comput Intell Neurosci, 48
Cited by
Trends and challenges in robot manipulation
Billard, A., & Kragic, D. (2019) · Science · doi:10.1126/science.aat8414 · Cited by 993
Self-citationAn algorithmic perspective on imitation learning
Osa, T., Pajarinen, J., Neumann, G., Bagnell, J. A., Abbeel, P., & Peters, J. (2018) · Foundations and Trends in Robotics · doi:10.1561/2300000053 · Cited by 405
“The CDS approach has been applied to learn the correlation between the arm and fingers [Shukla and Billard, 2012, Kim et al., 2014], or the eye and arm [Lukic et al., 2014].”
BackgroundMethodInfluentialAn Algorithmic Perspective on Imitation Learning
Osa, T., Pajarinen, J., Neumann, G., Bagnell, J. A., Abbeel, P., & Peters, J. (2018) · now publishers, Inc. eBooks · doi:10.1561/9781680834116 · Cited by 368
Tracking Control of Robotic Manipulators With Uncertain Kinematics and Dynamics
Xiao, B., Yin, S., & Kaynak, O. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2569068 · Cited by 279
“For instance, object grasping [1], fault detection and diagnosis [2], [3], and robotic manipulation in space for on-orbit servicing [4], have been extensively investigated.”
BackgroundAnyGrasp: Robust and Efficient Grasp Perception in Spatial and Temporal Domains
Fang, H.-S., Wang, C., Fang, H., Gou, M., Liu, J., Yan, H., Liu, W., Xie, Y., & Lu, C. (2023) · IEEE Transactions on Robotics · doi:10.1109/tro.2023.3281153 · Cited by 276
“In order to extend to the dynamic scene, classic methods usually require prior information about the objects [29]–[31], or operate on a fixed set of grasp trajectories [32].”
Background
Metadata
- Authors
- Kim, S., Shukla, A., & Billard, A.
- Affiliations
- École Polytechnique Fédérale de Lausanne (CH)
- ORCID
- Billard, Aude
- Venue
- IEEE Transactions on Robotics
- Published
- 2014-10
- Volume
- 30
- Issue
- 5
- Pages
- 1049-1065
- ISSN
- 1552-3098 (ISSN-L)
- 1941-0468
- OpenAlex
- W2018020788
- Cited by
- 220
- References
- 52
- Citations by year
- 2026: 8 · 2025: 14 · 2024: 27 · 2023: 19 · 2022: 20 · 2021: 29 · 2020: 20 · 2019: 12 · 2018: 23 · 2017: 17 · 2016: 18 · 2015: 10 · 2014: 3
- FWCI
- 17.81
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Locations
- IEEE Transactions on Robotics (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Funders
- EU Projects AMARSI (FP7-ICT-248311)
- FirstMM (FP7-248258)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Robot Manipulation and Learning
- Physical Sciences › Computer Science › Artificial Intelligence › Reinforcement Learning in Robotics
- Life Sciences › Neuroscience › Cognitive Neuroscience › Motor Control and Adaptation
- Keywords
- trajectory prediction, programming by demonstration, dynamical systems, sensor uncertainty, humanoid robots, robot manipulators, iCub
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Catching Objects in Flight. https://app.cochat.ai/papers/10.1109/tro.2014.2316022
- The paper
- Kim, S., Shukla, A., & Billard, A. (2014). Catching Objects in Flight. IEEE Transactions on Robotics. https://doi.org/10.1109/tro.2014.2316022
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.