Gecko inspired micro-fibrillar adhesives for wall climbing robots on micro/nanoscale rough surfaces
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper presents the fabrication, characterization and testing of bio-inspired synthetic dry adhesive fiber arrays. Fibers were fabricated via micromolding followed by spatula tip formation via dipping. Arrays of fibers with diameters between 28 mum and 57 mum and a height of 114 mum were fabricated with high uniformity on 6.25 cm2areas with up to 95% yield. Adaptation to uneven surfaces was observed with fiber elongations over 6 times the original height of the fiber. The unstructured sample exhibited 1.6 times as much adhesion as the fiber array sample for the flat punch indenter. However, fibrillar samples demonstrated up to 5.3 times as much adhesion as the unstructured sample for the hemispherical indenter. The fibrillar adhesive sample was implemented on a wall climbing robot which was able to carry itself and climb a distance on a painted wall and wood door.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biologically inspired crack trapping for enhanced adhesion
Glassmaker, N. J., Jagota, A., Hui, C.-Y., Noderer, W. L., & Chaudhury, M. K. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0703762104 · Cited by 258 · cited 1×
“molding [12], [20], [23]–[28], nano-embossing [29], carbon nanotube growth [21], [22], fiber drawing [30], and lithography [19], [31], [32].”
Cited by
Parness, A., Soto, D., Esparza, N., Gravish, N., Wilkinson, M., Autumn, K., & Cutkosky, M. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0048 · Cited by 277
Waalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives
Murphy, M. P., Kute, C., Mengüç, Y., & Sitti, M. (2011) · The International Journal of Robotics Research · doi:10.1177/0278364910382862 · Cited by 247
Self-citationRecent advances in the fabrication and adhesion testing of biomimetic dry adhesives
Sameoto, D., & Menon, C. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/10/103001 · Cited by 157
Metadata
- Authors
- Aksak, B., Murphy, M. P., & Sitti, M.
- Venue
- 2008 IEEE International Conference on Robotics and Automation
- Publisher
- IEEE
- Published
- 2008-05
- Pages
- 3058-3063
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2127250147
- Cited by
- 144
- References
- 1
- FWCI
- 59.94
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.