The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Safety in human-robot collaborative manufacturing environments: Metrics and control
Open accessAbstract
New paradigms in industrial robotics no longer require physical separation between robotic manipulators and humans. Moreover, in order to optimize production, humans and robots are expected to collaborate to some extent. In this scenario, involving a shared environment between humans and robots, common motion generation algorithms might turn out to be inadequate for this purpose. This paper proposes a kinematic control strategy which enforces safety, while maintaining the maximum level of productivity of the robot. The resulting motion of the (possibly redundant) robot is obtained as an output of an optimization-based real-time algorithm in which safety is regarded as a hard constraint to be satisfied. The methodology is experimentally validated on a dual-arm concept robot with 7-DOF per arm performing a manipulation task.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Real-Time Obstacle Avoidance for Manipulators and Mobile Robots
Khatib, O. (1986) · The International Journal of Robotics Research · doi:10.1177/027836498600500106 · Cited by 7,894
Motion Planning in Dynamic Environments Using Velocity Obstacles
Fiorini, P., & Shiller, Z. (1998) · The International Journal of Robotics Research · doi:10.1177/027836499801700706 · Cited by 2,008
Time-Optimal Control of Robotic Manipulators Along Specified Paths
Bobrow, J. E., Dubowsky, S., & Gibson, J. S. (1985) · The International Journal of Robotics Research · doi:10.1177/027836498500400301 · Cited by 1,315
Task-Priority Based Redundancy Control of Robot Manipulators
Nakamura, Y., Hanafusa, H., & Yoshikawa, T. (1987) · The International Journal of Robotics Research · doi:10.1177/027836498700600201 · Cited by 1,021
Minimum-time control of robotic manipulators with geometric path constraints
Shin, K., & McKay, N. (1985) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1985.1104009 · Cited by 996
3D collision detection: a survey
Jiménez, P., Thomas, F., & Torras, C. (2001) · Computers & Graphics · doi:10.1016/s0097-8493(00)00130-8 · Cited by 563
Collision Detection and Reaction: A Contribution to Safe Physical Human-Robot Interaction
Haddadin, S., Albu-Schaffer, A., De Luca, A., & Hirzinger, G. (2008) · 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2008.4650764 · Cited by 562
Requirements for Safe Robots: Measurements, Analysis and New Insights
Haddadin, S., Albu-Schäffer, A., & Hirzinger, G. (2009) · The International Journal of Robotics Research · doi:10.1177/0278364909343970 · Cited by 444
Zinn, M., Khatib, O., Roth, B., & Salisbury, J. K. (2004) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2004.1310938 · Cited by 409
Inevitable collision states — a step towards safer robots?
Fraichard, T., & Asama, H. (2004) · Advanced Robotics · doi:10.1163/1568553042674662 · Cited by 324
Cited by
Human–Robot Collaboration in Manufacturing Applications: A Review
Matheson, E., Minto, R., Zampieri, E. G. G., Faccio, M., & Rosati, G. (2019) · Robotics · doi:10.3390/robotics8040100 · Cited by 668
Working Together: A Review on Safe Human-Robot Collaboration in Industrial Environments
Robla-Gomez, S., Becerra, V. M., Llata, J. R., Gonzalez-Sarabia, E., Torre-Ferrero, C., & Perez-Oria, J. (2017) · IEEE Access · doi:10.1109/access.2017.2773127 · Cited by 589
Substantial capabilities of robotics in enhancing industry 4.0 implementation
Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2021) · Cognitive Robotics · doi:10.1016/j.cogr.2021.06.001 · Cited by 563
Gualtieri, L., Rauch, E., & Vidoni, R. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.101998 · Cited by 429
Digital twin driven human–robot collaborative assembly
Bilberg, A., & Malik, A. A. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.04.011 · Cited by 395
Metadata
- Authors
- Zanchettin, A. M., Ceriani, N. M., Rocco, P., Ding, H., & Matthias, B.
- Venue
- IEEE Transactions on Automation Science and Engineering
- Published
- 2016-04
- Volume
- 13
- Issue
- 2
- Pages
- 882-893
- ISSN
- 1545-5955 (ISSN-L)
- 1558-3783
- OpenAlex
- W2318055712
- Cited by
- 392
- References
- 25
- FWCI
- 21.03
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Safety in human-robot collaborative manufacturing environments: Metrics and control. https://app.cochat.ai/papers/10.1109/tase.2015.2412256
- The paper
- Zanchettin, A. M., Ceriani, N. M., Rocco, P., Ding, H., & Matthias, B. (2016). Safety in human-robot collaborative manufacturing environments: Metrics and control. IEEE Transactions on Automation Science and Engineering. https://doi.org/10.1109/tase.2015.2412256
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.