The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Electrochemical Model-Based State of Charge and Capacity Estimation for a Composite Electrode Lithium-Ion Battery
Abstract
Increased demand for hybrid and electric vehicles has motivated research to improve onboard state of charge (SOC) and state of health estimation (SOH). In particular, batteries with composite electrodes have become popular for automotive applications due to their ability to balance energy density, power density, and cost by adjusting the amount of each material within the electrode. SOH algorithms that do not use electrochemical-based models may have more difficulty maintaining an accurate battery model as the cell ages under varying degradation modes, such as lithium consumption at the solid-electrolyte interface or active material dissolution. Furthermore, efforts to validate electrochemical model-based state estimation algorithms with experimental aging data are limited, particularly for composite electrode cells. In this paper, we first present a reduced-order electrochemical model for a composite LiMn2O4-LiNi1/3Mn1/3Co1/3O2electrode battery that predicts the surface and bulk lithium concentration of each material in the composite electrode, as well as the current split between each material. The model is then used in dual-nonlinear observers to estimate the cell SOC and loss of cyclable lithium over time. Three different observer types are compared: 1) the extended Kalman filter; 2) fixed interval Kalman smoother; and 3) particle filter. Finally, an experimental aging campaign is used to compare the estimated capacities for five different cells with the measured capacities over time.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Optimal State Estimation: Kalman, H∞, and Nonlinear Approaches
Simon, D. (2006) · doi:10.1002/0470045345 · Cited by 4,875
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 1×
“These models are based on the first principles in porous electrode theory [11] and therefore have the potential to predict cell performance more accurately, as well as provide more information about the internal battery states such as lithium concentrations and reaction overpotentials.”
BackgroundExtended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.031 · Cited by 1,385 · cited 14×
“Further estimation accuracy could be achieved with greater knowledge of the model parameters, but this paper demonstrates that the EKF approach is an attractive option for onboard SOH estimation.”
MethodInfluential
Cited by
How, D. N. T., Hannan, M. A., Hossain Lipu, M. S., & Ker, P. J. (2019) · IEEE Access · doi:10.1109/access.2019.2942213 · Cited by 812
Shrivastava, P., Soon, T. K., Idris, M. Y. I. B., & Mekhilef, S. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.06.040 · Cited by 704
A brief review on key technologies in the battery management system of electric vehicles
Liu, K., Li, K., Peng, Q., & Zhang, C. (2019) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0516-8 · Cited by 635
Shen, S., Sadoughi, M., Li, M., Wang, Z., & Hu, C. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114296 · Cited by 537
Zheng, Y., Ouyang, M., Han, X., Lu, L., & Li, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.094 · Cited by 490
Metadata
- Authors
- Bartlett, A., Marcicki, J., Onori, S., Rizzoni, G., Yang, X. G., & Miller, T.
- Venue
- IEEE Transactions on Control Systems Technology
- Published
- 2015
- Pages
- 1-1
- ISSN
- 1063-6536 (ISSN-L)
- 1558-0865
- OpenAlex
- W2231565152
- Cited by
- 244
- References
- 4
- FWCI
- 14.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.