The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A method of tracking the peak power points for a variable speed wind energy conversion system
Abstract
In this paper, a method of tracking the peak power in a wind energy conversion system (WECS) is proposed, which is independent of the turbine parameters and air density. The algorithm searches for the peak power by varying the speed in the desired direction. The generator is operated in the speed control mode with the speed reference being dynamically modified in accordance with the magnitude and direction of change of active power. The peak power points in the P-/spl omega/ curve correspond to dP/d/spl omega/=0. This fact is made use of in the optimum point search algorithm. The generator considered is a wound rotor induction machine whose stator is connected directly to the grid and the rotor is fed through back-to-back pulse-width-modulation (PWM) converters. Stator flux-oriented vector control is applied to control the active and reactive current loops independently. The turbine characteristics are generated by a DC motor fed from a commercial DC drive. All of the control loops are executed by a single-chip digital signal processor (DSP) controller TMS320F240. Experimental results show that the performance of the control algorithm compares well with the conventional torque control method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pena, R., Clare, J. C., & Asher, G. M. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960288 · Cited by 2,759
Design and performance evaluation of a fuzzy-logic-based variable-speed wind generation system
Simoes, M. G., Bose, B. K., & Spiegel, R. J. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.605737 · Cited by 301
Cited by
High-power wind energy conversion systems: State-of-the-art and emerging technologies
Yaramasu, V., Wu, B., Sen, P. C., Kouro, S., & Narimani, M. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2378692 · Cited by 991
The state of the art of wind energy conversion systems and technologies: A review
Cheng, M., & Zhu, Y. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.08.037 · Cited by 600
A review of power converter topologies for wind generators
Baroudi, J. A., Dinavahi, V., & Knight, A. M. (2007) · Renewable Energy · doi:10.1016/j.renene.2006.12.002 · Cited by 536
Neural-Network-Based Sensorless Maximum Wind Energy Capture With Compensated Power Coefficient
Li, H., Shi, K. L., & McLaren, P. G. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.858282 · Cited by 322
A review on wind turbine control and its associated methods
Novaes Menezes, E. J., Araújo, A. M., & Bouchonneau da Silva, N. S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.297 · Cited by 319
Zhao, Y., Wei, C., Zhang, Z., & Qiao, W. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2280572 · Cited by 274
Resistor Emulation Approach to Low-Power RF Energy Harvesting
Paing, T., Shin, J., Zane, R., & Popovic, Z. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921167 · Cited by 264
Wind Turbine Power Coefficient Analysis of a New Maximum Power Point Tracking Technique
Xia, Y., Ahmed, K. H., & Williams, B. W. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2206332 · Cited by 256
Wei, C., Zhang, Z., Qiao, W., & Qu, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2420792 · Cited by 178
Metadata
- Authors
- Datta, R., & Ranganathan, V. T.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2003-03
- Volume
- 18
- Issue
- 1
- Pages
- 163-168
- ISSN
- 0885-8969 (ISSN-L)
- OpenAlex
- W2147072331
- Cited by
- 464
- References
- 2
- FWCI
- 12.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.