The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Improved Resolution of the MCSA Method Via Hilbert Transform, Enabling the Diagnosis of Rotor Asymmetries at Very Low Slip
Open accessAbstract
This paper proposes an online/offline induction motor current signature analysis (MCSA) with advanced signal-and-data-processing algorithms, based on the Hilbert transform. MCSA is a method for motor diagnosis with stator-current signals. Although it is one of the most powerful online methods for diagnosing motor faults, it has some drawbacks that can degrade the performance and accuracy of a motor-diagnosis system. In particular, it is very difficult to detect broken rotor bars when the motor is operating at low slip or under no load, due to fast Fourier transform (FFT) frequency leakage and the small amplitude of the current components related to the fault. Therefore, advanced signal-and-data-processing algorithms are proposed. They consist of a proper sample selection algorithm, a Hilbert transformation of the stator-sampled current, and spectral analysis via FFT of the modulus of the resultant time-dependent vector modulus for achieving MCSA efficiently. Experimental results obtained on a 1.1 kW three-phase squirrel-cage induction motor are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Current Signature Analysis to Detect Induction Motor Faults
Thomson, W. T., & Fenger, M. (2001) · IEEE Industry Applications Magazine · doi:10.1109/2943.930988 · Cited by 1,139
Peng, Z. K., Tse, P. W., & Chu, F. L. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.01.006 · Cited by 840
Computing the discrete-time "analytic" signal via FFT
Marple, L. (1999) · IEEE Transactions on Signal Processing · doi:10.1109/78.782222 · Cited by 753
Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors
Bonnett, A. H., & Soukup, G. C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.148460 · Cited by 593
Online Diagnosis of Induction Motors Using MCSA
Jung, J.-H., Lee, J.-J., & Kwon, B.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.885131 · Cited by 570
Noninvasive detection of broken rotor bars in operating induction motors
Kliman, G. B., Koegl, R. A., Stein, J., Endicott, R. D., & Madden, M. W. (1988) · IEEE Transactions on Energy Conversion · doi:10.1109/60.9364 · Cited by 525
Cause and analysis of stator and rotor failures in 3-phase squirrel cage induction motors
Bonnett, A. K., & Soukup, G. C. (2002) · Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference · doi:10.1109/papcon.1991.239667 · Cited by 489
What stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M. E. H., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 485
Quantitative evaluation of induction motor broken bars by means of electrical signature analysis
Bellini, A., Filippetti, F., Franceschini, G., Tassoni, C., & Kliman, G. B. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.952499 · Cited by 483
Cited by
A sparse auto-encoder-based deep neural network approach for induction motor faults classification
Sun, W., Shao, S., Zhao, R., Yan, R., Zhang, X., & Chen, X. (2016) · Measurement · doi:10.1016/j.measurement.2016.04.007 · Cited by 698
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Stator short circuits detection in PMSM by means of Hilbert-Huang transform and energy calculation
Urresty, J., Riba, J., Romeral, L., Rosero, J., & Serna, J. (2009) · 2009 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives · doi:10.1109/demped.2009.5292789 · Cited by 29
Metadata
- Authors
- Puche-Panadero, R., Pineda-Sanchez, M., Riera-Guasp, M., Roger-Folch, J., Hurtado-Perez, E., & Perez-Cruz, J.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2009-03
- Volume
- 24
- Issue
- 1
- Pages
- 52-59
- ISSN
- 0885-8969 (ISSN-L)
- OpenAlex
- W1988748745
- Cited by
- 288
- References
- 33
- FWCI
- 24.52
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.