The DOI matches its Crossref record.
Sheet-Type Braille Displays by Integrating Organic Field-Effect Transistors and Polymeric Actuators
Abstract
A large-area, flexible, and lightweight sheet-type Braille display has been successfully fabricated on a plastic film by integrating high-quality organic transistors and soft actuators. An array of rectangular plastic actuators is mechanically processed from a perfluorinated polymer electrolyte membrane. A small semisphere, which projects upward from the rubberlike surface of the display, is attached to the tip of each rectangular actuator. The effective display size is 4times4 cm2. Each Braille letter consists of 3times2 dots and 24 letters; in other words, 6 letters times 4 lines can be displayed. Pentacene field-effect transistors with top-contact geometry have a channel length of 20 mum and a mobility of 1 cm2/Vmiddots. The Braille dots on one line are driven for 0.9 s. The total thickness and weight of the entire device are 1 mm and 5.3 g, respectively. The present scheme will enable people with visual impairments to carry the Braille sheet display in their pockets and read Braille e-books at any time. Since all the device components are manufactured on plastic films, these sheet-type Braille displays are mechanically flexible, lightweight, shock resistant, and potentially inexpensive to manufacture; therefore, they are suitable for mobile electronics
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Stretchable active-matrix organic light-emitting diode display using printable elastic conductors
Sekitani, T., Nakajima, H., Maeda, H., Fukushima, T., Aida, T., Hata, K., & Someya, T. (2009) · Nature Materials · doi:10.1038/nmat2459 · Cited by 1,767
Self-citationA Rubberlike Stretchable Active Matrix Using Elastic Conductors
Sekitani, T., Noguchi, Y., Hata, K., Fukushima, T., Aida, T., & Someya, T. (2008) · Science · doi:10.1126/science.1160309 · Cited by 1,366
Self-citationStretchable, Large‐area Organic Electronics
Sekitani, T., & Someya, T. (2010) · Advanced Materials · doi:10.1002/adma.200904054 · Cited by 773
Self-citationEnergetics of metal–organic interfaces: New experiments and assessment of the field
Hwang, J., Wan, A., & Kahn, A. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2008.12.001 · Cited by 647
Flexible and Stretchable Electronics Paving the Way for Soft Robotics
Lu, N., & Kim, D.-H. (2014) · Soft Robotics · doi:10.1089/soro.2013.0005 · Cited by 535
Recent advances in ionic polymer–metal composite actuators and their modeling and applications
Jo, C., Pugal, D., Oh, I.-K., Kim, K. J., & Asaka, K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.04.003 · Cited by 406
Self-citationWearable Soft Technologies for Haptic Sensing and Feedback
Yin, J., Hinchet, R., Shea, H., & Majidi, C. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007428 · Cited by 325
Sekitani, T., Takamiya, M., Noguchi, Y., Nakano, S., Kato, Y., Sakurai, T., & Someya, T. (2007) · Nature Materials · doi:10.1038/nmat1903 · Cited by 306
Self-citationTacttoo: A Thin and Feel-Through Tattoo for On-Skin Tactile Output
Withana, A., Groeger, D., & Steimle, J. (2018) · Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology · doi:10.1145/3242587.3242645 · Cited by 187
Electro-Active Polymer Based Soft Tactile Interface for Wearable Devices
Mun, S., Yun, S., Nam, S., Park, S. K., Park, S., Park, B. J., Lim, J. M., & Kyung, K.-U. (2018) · IEEE Transactions on Haptics · doi:10.1109/toh.2018.2805901 · Cited by 141
Metadata
- Authors
- Kato, Y., Sekitani, T., Takamiya, M., Doi, M., Asaka, K., Sakurai, T., & Someya, T.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2007-02
- Volume
- 54
- Issue
- 2
- Pages
- 202-209
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2136805403
- Cited by
- 165
- References
- 0
- FWCI
- 4.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.