A Charge-Plasma-Based Dielectric-Modulated Junctionless TFET for Biosensor Label-Free Detection
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
To reduce the fabrication complexity and cost of the nanoscale devices, a charge-plasma concept is introduced for the first time to implement a dielectric-modulated junctionless tunnel field-effect transistor (DM-JLTFET) for biosensor label-free detection. The formation of p+source and n+drain regions in DM-JLTFET is done by the deposition of platinum (work function = 5.93 eV) and hafnium (work function = 3.9 eV) materials, respectively, over the silicon body. Furthermore, a nanogap cavity embedded within the gate dielectric is created by etching the portion of gate oxide layer toward the source end for sensing biomolecules. For this, the sensing capability of DM-JLTFET has been investigated in terms of variation in dielectric constant, charge density, length, and thickness of the cavity at different bias conditions. Finally, a comparative study between DM-JLTFET and MOSFET biosensor is investigated. The implementation of proposed device and all the simulations have been performed by using ATLAS device simulator.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Subthreshold Regime has the Optimal Sensitivity for Nanowire FET Biosensors
Gao, X. P. A., Zheng, G., & Lieber, C. M. (2010) · Nano Letters · doi:10.1021/nl9034219 · Cited by 571
Narang, R., Reddy, K. V. S., Saxena, M., Gupta, R. S., & Gupta, M. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2208115 · Cited by 308 · cited 8×
“However, in the case when cavity is filled with biomolecules (k > 1), ION does not vary with Lcavity because of its dependence only on dielectric constant of the biomolecules for TFET [15].”
BackgroundMethodInfluentialComparative analysis of dielectric- modulated FET and TFET-based biosensor
Narang, R., Saxena, M., & Gupta, M. (2015) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2015.2396899 · Cited by 296 · cited 1×
“In addition to these, in an earlier reported work of FET and physically doped TFET [16], high doping concentration (in source/drain region) makes the fabrication process very complex, which results in a higher thermal budget and expensive thermal annealing technique.”
Dielectric-Modulated Impact-Ionization MOS Transistor as a Label-Free Biosensor
Kannan, N., & Kumar, M. J. (2013) · IEEE Electron Device Letters · doi:10.1109/led.2013.2283858 · Cited by 161
Cited by
Performance Assessment of A Novel Vertical Dielectrically Modulated TFET-Based Biosensor
Verma, M., Tirkey, S., Yadav, S., Sharma, D., & Yadav, D. S. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2732820 · Cited by 276
Self-citationChakraborty, A., & Sarkar, A. (2017) · Journal of Computational Electronics · doi:10.1007/s10825-017-0999-2 · Cited by 94
Metadata
- Authors
- Singh, D., Pandey, S., Nigam, K., Sharma, D., Yadav, D. S., & Kondekar, P.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2017-01
- Volume
- 64
- Issue
- 1
- Pages
- 271-278
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2551832971
- Cited by
- 237
- References
- 4
- FWCI
- 5.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.