A Study of Pyro-Phototronic Effect in ZnO/CdSe Colloidal Quantum Dots-Based Self-Powered Photodetectors
The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
This article studies the pyro-phototronic effect in different colloidal quantum dots (CQDs) based on self-powered photodetectors. The impact of the transport layer, electrodes, and substrate on the pyrocurrent has been studied and it has been observed that the pyro-phototronic effect is dominant for Au-electrode in ITO-based devices while it is higher in Pd-electrode for Si-based devices. The study is performed using two sources namely UV and white light. The MoOx/Au-based device shows 70% of the pyro-current over the saturated photocurrent (${{J}_{\text {py}}}/{{J}_{\text {ph}}}$) with a rise time of 9.69 ms under white light illumination, best among the ITO-based devices. Si-based devices show an improvement of 93.94% over the photocurrent due to the involvement of the pyro-phototronic effect. The present work also proposes an equivalent circuit model for the self-powered photodetector incorporating the pyro-phototronic effect. Finally, a study of noise in different self-powered photodetectors is also presented.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Solid state electronic devices
Streetman, B. G. (1972) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,475
Semiconductor physics and devices basic principles
Neamen, D. A. (1991) · Cited by 1,219
Zhao, B., Wang, F., Chen, H., Zheng, L., Su, L., Zhao, D., & Fang, X. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700264 · Cited by 840 · cited 1×
“Such photodetectors are known as self-powered photodetectors, having many futuristic applications [1], [2].”
BackgroundEkimov, A. I., Kudryavtsev, I. A., Efros, A. L., Yazeva, T. V., Hache, F., Schanne-Klein, M. C., Rodina, A. V., Ricard, D., & Flytzanis, C. (1993) · Journal of the Optical Society of America B · doi:10.1364/josab.10.000100 · Cited by 811 · cited 1×
“The CdSe QDs size is ∼ 4.69 nm which is well below the Bohr exciton radius of CdSe (5.6 nm [22]).”
BackgroundInfluentialLow-dimensional wide-bandgap semiconductors for UV photodetectors
Li, Z., Yan, T., & Fang, X. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00583-9 · Cited by 692 · cited 1×
“They fabricated an FTO/ZnO/NiO/Ag nanowire-based device, which exhibited a rise and fall time of 3.92 µ s each and an improved responsivity of 290 mA/W. Li et al. [16] explained the advantages of low-dimensional materials in UV photodetection.”
BackgroundInfluentialChen, Z., Li, J., Li, T., Fan, T., Meng, C., Li, C., Kang, J., Chai, L., Hao, Y., Tang, Y., et al. (2022) · National Science Review · doi:10.1093/nsr/nwac104 · Cited by 557 · cited 1×
“Therefore, such devices can be utilized in energy-harvesting systems and disease detection as discussed in [7], [8], and [9].”
BackgroundLight-induced pyroelectric effect as an effective approach for ultrafast ultraviolet nanosensing
Wang, Z., Yu, R., Pan, C., Li, Z., Yang, J., Yi, F., & Wang, Z. L. (2015) · Nature Communications · doi:10.1038/ncomms9401 · Cited by 403 · cited 5×
“In self-powered photodetectors, light transients are responsible for temperature gradient and hence for the pyro-phototronic effect [5].”
BackgroundInfluentialHölzl, J., & Schulte, F. K. (1979) · Springer Tracts in Modern Physics · doi:10.1007/bfb0048919 · Cited by 352
Zheng, F., Chen, Z., Li, J., Wu, R., Zhang, B., Nie, G., Xie, Z., & Zhang, H. (2022) · Advanced Science · doi:10.1002/advs.202105231 · Cited by 297 · cited 1×
“Therefore, such devices can be utilized in energy-harvesting systems and disease detection as discussed in [7], [8], and [9].”
BackgroundUltrafast Response p‐Si/n‐ZnO Heterojunction Ultraviolet Detector Based on Pyro‐Phototronic Effect
Wang, Z., Yu, R., Wang, X., Wu, W., & Wang, Z. L. (2016) · Advanced Materials · doi:10.1002/adma.201600884 · Cited by 241 · cited 2×
“Si-substrate-based devices are reported in [33], [35], [38], and [39] along with the ZnO as a pyro-electric material.”
BackgroundSassi, U., Parret, R., Nanot, S., Bruna, M., Borini, S., De Fazio, D., Zhao, Z., Lidorikis, E., Koppens, F. H. L., Ferrari, A. C., et al. (2017) · Nature Communications · doi:10.1038/ncomms14311 · Cited by 223 · cited 1×
“Therefore, such devices can be utilized in energy-harvesting systems and disease detection as discussed in [7], [8], and [9].”
BackgroundHigh‐Sensitivity p–n Junction Photodiodes Based on PbS Nanocrystal Quantum Dots
Pal, B. N., Robel, I., Mohite, A., Laocharoensuk, R., Werder, D. J., & Klimov, V. I. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102532 · Cited by 169 · cited 1×
“After each coating to CdSe, ethanedithiol is coated over it to enhance the conductance of CdSe QDs [25] and then subsequent drying at 80 C.”
BackgroundComprehensive Pyro‐Phototronic Effect Enhanced Ultraviolet Detector with ZnO/Ag Schottky Junction
Wang, Y., Zhu, L., Feng, Y., Wang, Z., & Wang, Z. L. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807111 · Cited by 158
You, D., Xu, C., Zhang, W., Zhao, J., Qin, F., & Shi, Z. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.05.050 · Cited by 158 · cited 1×
“The work reported in [5], [13], [33], [34], [37], [38], and [40] utilizes ITO/FTO-based transparent conducting oxides as a substrate to achieve a 100% illumination ratio while the ZnO has been utilized as the pyroelectric material.”
BackgroundOuyang, B., Zhang, K., & Yang, Y. F. (2018) · iScience · doi:10.1016/j.isci.2018.01.002 · Cited by 141
Exciton and core-level electron confinement effects in transparent ZnO thin films
Mósquera, A., Horwat, D., Rashkovskiy, A., Ковалев, А. И., Miska, P., Wainstein, D., Albella, J. M., & Endrino, J. L. (2013) · Scientific Reports · doi:10.1038/srep01714 · Cited by 137 · cited 1×
“The average particle size of the prepared QDs is around ∼ 2.77 nm which is well below the Bohr exciton radius of ZnO (2.87 nm, a confinement limit [21]).”
BackgroundInfluentialDeng, M., Li, Z., Deng, X., Hu, Y., & Fang, X. (2023) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2023.05.007 · Cited by 120 · cited 1×
“Such photodetectors are known as self-powered photodetectors, having many futuristic applications [1], [2].”
BackgroundRana, A. K., Kumar, M., Ban, D., Wong, C., Yi, J., & Kim, J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900438 · Cited by 107 · cited 1×
“Rana et al. [15] demonstrated that the figures of merit of self-powered devices could be further improved by utilizing a 100% illumination area by the incident of light from the transparent conductor side.”
MethodPeng, W., Yu, R., Wang, X., Wang, Z., Zou, H., He, Y., & Wang, Z. L. (2016) · Nano Research · doi:10.1007/s12274-016-1240-5 · Cited by 105 · cited 1×
“The work reported in [5], [13], [33], [34], [37], [38], and [40] utilizes ITO/FTO-based transparent conducting oxides as a substrate to achieve a 100% illumination ratio while the ZnO has been utilized as the pyroelectric material.”
BackgroundYin, B., Zhang, H., Qiu, Y., Luo, Y., Zhao, Y., & Hu, L. (2017) · Nanoscale · doi:10.1039/c7nr06037h · Cited by 75 · cited 2×
“However, the devices reported in [35] and [39] do not utilize transparent conductors, therefore most of the light gets reflected from the top electrode.”
BackgroundRawat, G., Somvanshi, D., Kumar, H., Kumar, Y., Kumar, C., & Jit, S. (2015) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2015.2512565 · Cited by 73 · cited 1×
“For the cleaning of ITO-based devices, the procedure followed is given in [23], while for the cleaning of a Si-based device, the procedure followed is given in [24].”
MethodSelf-citationBoruah, B. D., Majji, S. N., Nandi, S., & Misra, A. (2018) · Nanoscale · doi:10.1039/c7nr08125a · Cited by 73 · cited 2×
“The pyro-phototronic effect was also employed by Boruah et al. [13] along with a carrier transport layer (PEDOT:PSS) and an active layer (ZnO NRs) to achieve an improved transient response.”
BackgroundMethodMeyer, J., & Kahn, A. L. (2011) · Journal of Photonics for Energy · doi:10.1117/1.3555081 · Cited by 70 · cited 1×
“The bandgap of MoOx is 3 eV [27] while the electron affinity of MoOx is 6.7 eV [28].”
BackgroundInfluentialQiao, S., Sun, H., Liu, J., Fu, G., & Wang, S. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107004 · Cited by 62 · cited 1×
“Quio et al. [19] reported the ITO/ZnO NW/Si-based device depicting the dependence of the pyro-phototronic effect on the nanowire length.”
BackgroundPeng, W., Pan, Z., Li, F., Cai, Y., & He, Y. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105268 · Cited by 58 · cited 2×
“However, the devices reported in [35] and [39] do not utilize transparent conductors, therefore most of the light gets reflected from the top electrode.”
BackgroundChen, L., Wang, B., Dong, J., Gao, F., Zheng, H., He, M., & Wang, X. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105260 · Cited by 53 · cited 1×
“Chen et al. [14] utilized a Si-substrate (indirect bandgap semiconductor) with ZnO NWs (pyroelectric material).”
BackgroundElectrical and Optical Characteristics of Self-Powered Colloidal CdSe Quantum Dot-Based Photodiode
Kumar, H., Kumar, Y., Mukherjee, B., Rawat, G., Kumar, C., Pal, B. N., & Jit, S. (2017) · IEEE Journal of Quantum Electronics · doi:10.1109/jqe.2017.2696487 · Cited by 48 · cited 2×
“However, in the current study, CQDs are used that are known for solution processing, cost-effectiveness, tunability, and spectrum selectivity [30].”
BackgroundSelf-citationSerkjan, N., Liu, X., Abdiryim, T., Liu, F., Zhang, H., Kadir, A., Liu, Y., Tang, X., & Cheng, Q. (2022) · Carbon · doi:10.1016/j.carbon.2022.12.068 · Cited by 48
Self-powered photodetectors: a device engineering perspective
Goel, V., Kumar, Y., Rawat, G., & Kumar, H. (2024) · Nanoscale · doi:10.1039/d4nr00607k · Cited by 47 · cited 1×
“The pyro-phototronic effect is comprised of semiconductor, photoexcitation, and pyroelec-tricity [10], [11].”
BackgroundSelf-citationSize- and temperature-dependent piezoelectric properties of gallium nitride nanowires
Zhang, J., Wang, C., Chowdhury, R., & Adhikari, S. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.022 · Cited by 45 · cited 1×
“Nanostructures exhibit higher polarization compared to their bulk counterparts, as reported by Zhang et al. [17].”
BackgroundPyro-phototronic effect enhanced self-powered photodetector
Li, Q., Li, Z., & Meng, J. (2022) · International Journal of Optomechatronics · doi:10.1080/15599612.2022.2051649 · Cited by 45 · cited 1×
“The pyro-phototronic effect results in enhanced sensitivity, response time, responsivity, detectivity, and external quantum efficiency (EQE) of the self-powered photodetectors [12].”
BackgroundHui, R. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-805345-4.00004-4 · Cited by 45
Size-dependent pyroelectric properties of gallium nitride nanowires
Zhang, J., & Wang, C. (2016) · Journal of Applied Physics · doi:10.1063/1.4945765 · Cited by 24 · cited 1×
“For instance, gallium nitride nanowires show pyroelectric coefficients that are 4.6 times higher than bulk gallium nitride, attributed to the small-scale effect [18].”
BackgroundInfluentialHeating Effects of Colloidal ZnO Quantum Dots (QDs) on ZnO QD/CdSe QD/MoOx Photodetectors
Kumar, H., Kumar, Y., Rawat, G., Kumar, C., Mukherjee, B., Pal, B. N., & Jit, S. (2017) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2017.2761785 · Cited by 23 · cited 1×
“For the cleaning of ITO-based devices, the procedure followed is given in [23], while for the cleaning of a Si-based device, the procedure followed is given in [24].”
MethodSelf-citationDesign and characterization of MoO3/CdSe heterojunctions
Garni, S. E. A., & Qasrawi, A. F. (2018) · Physica E Low-dimensional Systems and Nanostructures · doi:10.1016/j.physe.2018.09.016 · Cited by 21
Chen, L., Dong, J., He, M., & Wang, X. (2020) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.11.145 · Cited by 19 · cited 2×
“Si-substrate-based devices are reported in [33], [35], [38], and [39] along with the ZnO as a pyro-electric material.”
BackgroundKumar, H., Kumar, Y., Mukherjee, B., Rawat, G., Kumar, C., Pal, B. N., & Jit, S. (2019) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2019.2907529 · Cited by 16 · cited 4×
“While the electron affinity of ZnO QDs and CdSe QDs are 4.34 eV [26] and 4.3 eV [26], respectively.”
BackgroundMethodInfluentialSelf-citationGoel, V., & Kumar, H. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3212338 · Cited by 11 · cited 5×
“Goel and Kumar [4] employed ZnO QDs and CdSe QDs in combination with MoOx as the hole transport layer to fabricate a pyro-phototronic enhanced photodetector.”
BackgroundMethodInfluentialSelf-citationPyro-Phototronic Aided Self-Powered Photodetector With Hybrid Heterojunction of PQT-12 and CdSe CQDs
Goel, V., & Kumar, H. (2023) · IEEE Photonics Technology Letters · doi:10.1109/lpt.2023.3288141 · Cited by 8 · cited 1×
“Materials such as ZnO, CdS, CdSe, SnS, Perovskite, organic polymers, and several others are the commonly used pyroelectric materials in self-powered photodetectors [4], [6].”
BackgroundSelf-citationNoise in Photodiodes and Photoreceiver Systems
Alabedra, R. M., & Rigaud, D. (2009) · doi:10.1002/9780470611630.ch7 · Cited by 6 · cited 1×
“It is defined as the minimum amount of incident photon power required to generate the photocurrent equal to the noise current for unit bandwidth [43] as shown in the following equation : where ⟨ i 2 n ⟩ is the time-averaged square noise power and S max is the peak value of responsivity of the…”
BackgroundModified Schottky Contact (Pd/MoOx) Based Filter-Free Spectrum-Selective Self-Powered Photodetector
Goel, V., & Kumar, H. (2022) · IEEE Photonics Technology Letters · doi:10.1109/lpt.2022.3211676 · Cited by 5 · cited 2×
“In ITO/ZnO-QDs/CdSe-QDs/MoOx/(Pd,Au)-based devices, both CdSe and ZnO QDs are involved in depletion region [4], [20], and therefore pyro-potential is contributed by both CdSe QDs layers and ZnO QDs layers.”
BackgroundMethodSelf-citationKumar, H., & Jit, S. (2023) · Springer eBooks · doi:10.1007/978-3-031-20510-1_21 · Cited by 5
Self-citationElectrical and optical characteristics of CdSe Quantum Dot based Schottky diode
Kumar, H., Kumar, Y., Rawat, G., Kumar, C., Pal, B. N., & Jit, S. (2016) · IEEE International Conference on Industrial and Information Systems (ICIIS) · doi:10.1109/iciinfs.2016.8263043 · Cited by 1
Self-citation
Cited by
Polymer–Perovskite Microcrystal Heterojunction for Self-Powered Optical Sensing and Communication
Sathyanarayana, S., & Das, B. C. (2026) · Advanced Materials · doi:10.1002/adma.202517950 · Cited by 7
Advances in Pyro‐Phototronics: Materials, Emerging Applications and Future Prospects
Das, P. R., Bora, J., Bora, S. D., Singh, K. B., Bordoloi, A., & Pal, A. R. (2026) · Advanced Optical Materials · doi:10.1002/adom.202502947 · Cited by 5
“Incorporating QDs into this configuration, Goel et al. prepared a QD-based isotype junction, namely n-ZnO/n-CdSe and n-ZnO/n-CdSe/MoO x [ 104 ].”
Yang, J., Gao, Y., Gao, Y., Wang, L., Yang, X., Li, X., Zhang, X., & Lü, W. (2025) · Journal of Applied Physics · doi:10.1063/5.0276354 · Cited by 3
Zheng, D., Sun, C., He, H., & Dong, X. (2026) · Applied Physics Letters · doi:10.1063/5.0323508 · Cited by 2
Recent advancements in chalcogenide photodetectors: From 3D bulk absorbers to 0D quantum dots
Kangsabanik, M., & Gayen, R. N. (2026) · Chemical Physics Reviews · doi:10.1063/5.0260155
Metadata
- Authors
- Goel, V., & Kumar, H.
- Affiliations
- Jaypee Institute of Information Technology (IN)
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2024-08
- Volume
- 71
- Issue
- 8
- Pages
- 5073-5080
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W4399527745
- Semantic Scholar
- 777d93ea44094cbf468bb159c1e429fd45fa4a07
- Cited by
- 5
- References
- 43
- Citations by year
- 2026: 3 · 2025: 2
- FWCI
- 0.49
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Funders
- Science and Engineering Research Board (SERB), Department of Science and Technology (DST), Government of India (SRG/2020/001282, EEQ/2020/000183, SRG/2020/000461, EEQ/2022/000141)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Quantum Dots Synthesis And Properties
- Physical Sciences › Materials Science › Materials Chemistry › ZnO doping and properties
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Keywords
- pyro-phototronic effect, self-powered photodetectors, colloidal quantum dots, transport layer, electrode materials, substrate effects, equivalent circuit model, photodetector noise
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.