The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Reliability of power cycling for igbt power semiconductor modules
Abstract
Power cycling capability is one of the most important reliability items in the application of power semiconductor modules. This paper describes the failure mechanism of power cycling by analysis of the structure of lead-based solder and joint failure due to solder fatigue. By the application of some additional elements, it has been found that a newly developed tin-silver-based solder shows both excellent mechanical properties and wettability. Further, we have established, both by experiment and computer calculation, that the dependence of the failure mechanism on /spl Delta/Tj is completely different between the new tin-silver-based solder and conventional lead-based solder. According to these evaluations, it has become clear that the power cycling lifetime of the new tin-silver-based solder depends on the solder joint at higher than around 110 K, while it depends on the aluminum wire bonds at lower than around 50 K. As a result, higher power cycling capability can be successfully achieved by using this newly developed solder instead of conventional lead-based solder.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Crack mechanism in wire bonding joints
Ramminger, S., Türkes, P., & Wachutka, G. (1998) · Microelectronics Reliability · doi:10.1016/s0026-2714(98)00141-3 · Cited by 101
Reliability of thick Al wire bonds in IGBT modules for traction motor drives
Onuki, J., Koizumi, M., & Suwa, M. (2000) · IEEE Transactions on Advanced Packaging · doi:10.1109/6040.826768 · Cited by 99
On the effect of power cycling stress on IGBT modules
Cova, P., & Fantini, F. (1998) · Microelectronics Reliability · doi:10.1016/s0026-2714(98)00081-x · Cited by 95
Fast power cycling test for insulated gate bipolar transistor modules in traction application
Held, M., Jacob, P., Nicoletti, G. J., And, P. S., & Poech, M. (1999) · International Journal of Electronics · doi:10.1080/002072199132743 · Cited by 87
Failure analysis of power modules: a look at the packaging and reliability of large IGBTs
de lambilly, H., & Keser, H. O. (1993) · IEEE Transactions on Components Hybrids and Manufacturing Technology · doi:10.1109/33.237930 · Cited by 67
Power cycling reliability of IGBT power modules
Sankaran, V. A., Chen, C., Avant, C. S., & Xu, X. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1997.630841 · Cited by 61
PLASTIC-STRAIN OF ALUMINIUM INTERCONNECTIONS DURING PULSED OPERATION OF IGBT MULTICHIP MODULES
Ciappa, M., & Malberti, P. (1996) · Quality and Reliability Engineering International · doi:10.1002/(sici)1099-1638(199607)12:4<297::aid-qre21>3.0.co;2-c · Cited by 58
Cited by
Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling
Smet, V., Forest, F., Huselstein, J.-J., Richardeau, F., Khatir, Z., Lefebvre, S., & Berkani, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114313 · Cited by 620
Oh, H., Han, B., McCluskey, P., Han, C., & Youn, B. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2346485 · Cited by 513
Ji, B., Pickert, V., Cao, W., & Zahawi, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251358 · Cited by 329
Power Cycling Reliability of Power Module: A Survey
Durand, C., Klingler, M., Coutellier, D., & Naceur, H. (2016) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2016.2516044 · Cited by 239
Reliability Prediction for Inverters in Hybrid Electrical Vehicles
Hirschmann, D., Tissen, D., Schroder, S., & De Doncker, R. W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909236 · Cited by 209
Metadata
- Authors
- Morozumi, A., Yamada, K., Miyasaka, T., Sumi, S., & Seki, Y.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2003-05
- Volume
- 39
- Issue
- 3
- Pages
- 665-671
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2102575490
- Cited by
- 256
- References
- 7
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.