Comparison Between Output CM Chokes for SiC Drive Operating at 20- and 200-kHz Switching Frequencies
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The adoption of silicon carbide (SiC) MOSFETs in variable speed drives (VSDs) makes it possible to increase the inverter switching frequency up to several hundred kilohertz without incurring excessive inverter loss. As a result, the harmonic currents and related losses in the machine can be significantly reduced, and the dynamic performance of motor will also be improved. However, the high switching frequency will increase the common mode (CM) electromagnetic interference (EMI) emission of the drive system presenting new challenges on CM choke design. In the literature, chokes designed for VSDs operating above 100 kHz are rarely found. Hence, this paper presents a case study on the output CM chokes for a SiC-based VSD switching at 20 and 200 kHz. A comprehensive comparison is made between the chokes for two switching frequencies regarding design, sizing, and performance, through both calculation and experiments. The results show that the CM choke designed for 200 kHz switching frequency is significantly larger and heavier than the 20 kHz choke, due to the higher inductance value required to meet the EMI limit and the lower permeability of the core material. Meanwhile, the 200 kHz choke is also less effective in noise attenuation as a result of the larger winding capacitance compared with the 20 kHz choke.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685
Silicon carbide benefits and advantages for power electronics circuits and systems
Elasser, A., & Chow, T. P. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021562 · Cited by 537 · cited 1×
“higher switching speed, and higher temperature capabilities, compared to conventional silicon (Si) based devices [1]– [3].”
Background
Cited by
Wide Bandgap Devices in AC Electric Drives: Opportunities and Challenges
Morya, A. K., Gardner, M. C., Anvari, B., Liu, L., Yepes, A. G., Doval-Gandoy, J., & Toliyat, H. A. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2892807 · Cited by 444
“Comparison of common mode voltage for 200 kHz and 20 kHz for SiC MOSFET based motor drive [99].”
BackgroundInfluentialComparative Analysis on Conducted CM EMI Emission of Motor Drives: WBG Versus Si Devices
Han, D., Li, S., Wu, Y., Choi, W., & Sarlioglu, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2681968 · Cited by 297
Self-citationAdoption of wide bandgap technology in hybrid/electric vehicles-opportunities and challenges
Han, D., Li, S., Lee, W., & Sarlioglu, B. (2017) · 2017 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec.2017.7993332 · Cited by 34
Self-citationExperimental Validation of Design Concepts for Future EV-Traction Inverters
Bubert, A., Oberdieck, K., Xu, H., & De Doncker, R. W. (2018) · 2018 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec.2018.8450253 · Cited by 31
Metadata
- Authors
- Han, D., Morris, C. T., Lee, W., & Sarlioglu, B.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2017-05
- Volume
- 53
- Issue
- 3
- Pages
- 2178-2188
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2590365226
- Cited by
- 124
- References
- 2
- FWCI
- 6.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison Between Output CM Chokes for SiC Drive Operating at 20- and 200-kHz Switching Frequencies. https://app.cochat.ai/papers/10.1109/tia.2017.2672919
- The paper
- Han, D., Morris, C. T., Lee, W., & Sarlioglu, B. (2017). Comparison Between Output CM Chokes for SiC Drive Operating at 20- and 200-kHz Switching Frequencies. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2017.2672919
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.