The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Diode-clamped multilevel converters: a practicable way to balance DC-link voltages
Abstract
The converter topologies identified as diode-clamped multilevel (DCM) or, equivalently, as multipoint clamped (MPC), are rarely used in industrial applications, owing to some serious drawbacks involving mainly the stacked bank of capacitors that constitutes their multilevel DC link. The balance of the capacitor voltages is not possible in all operating conditions when the MPC converter possesses a passive front end. On the other hand, in AC/DC/AC power conversion, the back-to-back connection of a multilevel rectifier with a multilevel inverter allows the balance of the DC-link capacitor voltages and, at the same time, it offers the power-factor-correction capability at the mains AC input. An effective balancing strategy suitable for MPC conversion systems with any number of DC-link capacitors is presented here. The strategy has been carefully studied to optimize the converter efficiency. The simulation results related to a high-power conversion system (up to 10 MW) characterized by four intermediate DC-link capacitors are shown.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New Neutral-Point-Clamped PWM Inverter
Nabae, A., Takahashi, I., & Akagi, H. (1981) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1981.4503992 · Cited by 5,139
Multilevel converters-a new breed of power converters
Lai, J.-S., & Peng, F. Z. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530601 · Cited by 2,665
Multilevel converters for large electric drives
Tolbert, L. M., Peng, F. Z., & Habetler, T. G. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.740843 · Cited by 1,408
A new multilevel PWM method: a theoretical analysis
Carrara, G., Gardella, S., Marchesoni, M., Salutari, R., & Sciutto, G. (1992) · IEEE Transactions on Power Electronics · doi:10.1109/63.145137 · Cited by 1,091
Self-citationA general circuit topology of multilevel inverter
Choi, N. S., Cho, J. G., & Cho, G. H. (2002) · PESC record · doi:10.1109/pesc.1991.162660 · Cited by 403
Five level GTO inverters for large induction motor drives
Menzies, R. W., Steimer, P., & Steinke, J. K. (2002) · Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting · doi:10.1109/ias.1993.298889 · Cited by 258
Five-level GTO inverters for large induction motor drives
Menzies, R. W., Steimer, P., & Steinke, J. K. (1994) · IEEE Transactions on Industry Applications · doi:10.1109/28.297910 · Cited by 194
A Four-Level Rectifier-Inverter System for Drive Applications
Sinha, G., & Lipo, T. A. (1998) · IEEE Industry Applications Magazine · doi:10.1109/2943.644889 · Cited by 174
A multilevel voltage-source converter system with balanced DC voltages
Peng, F. Z., Lai, J., McKeever, J. W., et al. (2002) · PESC record · doi:10.1109/pesc.1995.474959 · Cited by 150
A four level rectifier-inverter system for drive applications
Sinha, G., & Lipo, T. A. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1996.560201 · Cited by 77
Cited by
The age of multilevel converters arrives
Franquelo, L., Rodriguez, J., Leon, J., Kouro, S., Portillo, R., & Prats, M. (2008) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2008.923519 · Cited by 2,016
Abu-Rub, H., Holtz, J., Rodriguez, J., & Baoming, G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043039 · Cited by 1,337
Multilevel Converters: An Enabling Technology for High-Power Applications
Rodriguez, J., Franquelo, L. G., Kouro, S., Leon, J. I., Portillo, R. C., Prats, M. A. M., & Perez, M. A. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2030235 · Cited by 1,196
Multilevel Inverter Topologies With Reduced Device Count: A Review
Gupta, K. K., Ranjan, A., Bhatnagar, P., Sahu, L. K., & Jain, S. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2405012 · Cited by 1,193
Meshram, P. M., & Borghate, V. B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2317705 · Cited by 405
Metadata
- Authors
- Marchesoni, M., & Tenca, P.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2002-08
- Volume
- 49
- Issue
- 4
- Pages
- 752-765
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2125863931
- Cited by
- 322
- References
- 10
- FWCI
- 4.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Diode-clamped multilevel converters: a practicable way to balance DC-link voltages. https://app.cochat.ai/papers/10.1109/tie.2002.801237
- The paper
- Marchesoni, M., & Tenca, P. (2002). Diode-clamped multilevel converters: a practicable way to balance DC-link voltages. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2002.801237
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.