The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A DSP-Based Active Disturbance Rejection Control Design for a 1-kW H-Bridge DC–DC Power Converter
Abstract
This paper presents the design and implementation of an advanced digital controller for a 1-kW H-bridge dc-dc power converter. A new control algorithm based on the active disturbance rejection concept is developed to cope with the highly nonlinear dynamics of the converter and the disturbances. An experimental digital control system is used to implement the new control strategy. It consists of a digital control board based on the TMS320C6711 digital signal processor chip, an analogy I/O board, and a complex programmable logic device pulsewidth-modulation generation board. Using a newly developed bandwidth-parametrization technique, an autotuning method based on noise quantification is also developed and tested. Experimental results show the advantages and flexibilities of the new control method for the H-bridge dc-dc power converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaling and bandwidth-parameterization based controller tuning
Gao, Z. (2005) · Proceedings of the 2003 American Control Conference, 2003. · doi:10.1109/acc.2003.1242516 · Cited by 2,446
Self-citationAn alternative paradigm for control system design
Gao, Z., Huang, Y., & Han, J. (2003) · Proceedings of the 40th IEEE Conference on Decision and Control (Cat. No.01CH37228) · doi:10.1109/cdc.2001.980926 · Cited by 177
Self-citationNonlinear design methods for control systems
Han, J. (1999) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)56259-x · Cited by 147
Cited by
From PID to Active Disturbance Rejection Control
Han, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011621 · Cited by 6,803
Active disturbance rejection control: a paradigm shift in feedback control system design
Gao, Z. (2006) · 2006 American Control Conference · doi:10.1109/acc.2006.1656579 · Cited by 953
Self-citationSpeed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer
Liu, H., & Li, S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2162217 · Cited by 774
Yao, J., Jiao, Z., & Ma, D. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2304912 · Cited by 708
Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia
Li, S., & Liu, Z. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024655 · Cited by 676
Wang, J., Li, S., Yang, J., Wu, B., & Li, Q. (2015) · IET Control Theory & Applications · doi:10.1049/iet-cta.2014.0220 · Cited by 301
Active Disturbance Rejection Control for MEMS Gyroscopes
Zheng, Q., Dong, L., Lee, D. H., & Gao, Z. (2009) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2008.2008638 · Cited by 292
Self-citationOn convergence of tracking differentiator
Guo, B.-Z., & Zhao, Z.-L. (2011) · International Journal of Control · doi:10.1080/00207179.2011.569954 · Cited by 289
Survey on methods of increasing the efficiency of extended state disturbance observers
Madoński, R., & Herman, P. (2015) · ISA Transactions · doi:10.1016/j.isatra.2014.11.008 · Cited by 271
Tang, G., Xue, W., Huang, X., & Song, K. (2024) · Control Engineering Practice · doi:10.1016/j.conengprac.2023.105808 · Cited by 19
Metadata
- Authors
- Sun, B., & Gao, Z.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2005-10
- Volume
- 52
- Issue
- 5
- Pages
- 1271-1277
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2159575859
- Cited by
- 368
- References
- 3
- FWCI
- 5.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.