The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Design and Implementation of a Robust Current-Control Scheme for a PMSM Vector Drive With a Simple Adaptive Disturbance Observer
Abstract
This paper introduces a robust current-control scheme for a permanent-magnet synchronous motor (PMSM) with a simple adaptive disturbance observer. The robust controller is realized by including an adaptive element in the reference-voltage-generation stage using the feedforward control. Due to the time-varying nature and the high-bandwidth property of the uncertainties in a practical PMSM drive system, the adaptive element is simply chosen as the estimated uncertainty function, which adaptively varies with different operating conditions. Subsequently, the frequency modes of the uncertainty function are embedded in the control effort, and a robust current-control performance is yielded. Furthermore, the inclusion of the estimated uncertainty function provides an efficient solution for torque-ripple minimization in PMSM drives. This is because the frequency modes of the disturbances to be eliminated, i.e., the flux harmonics, are included in the stable closed-loop system. To provide a high-bandwidth estimate of the uncertainty function, a simple adaptation law is derived using the nominal current dynamics and the steepest descent method. To guarantee the system's convergence and to properly tune the proposed observer, a stability analysis based on a discrete-time Lyapunov function has been used. Comparative evaluation experiments are presented to demonstrate the effectiveness of the proposed control scheme under different operating conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
System Identification: Theory for the User
Lennart Ljung, A. (1987) · Cited by 17,690
System identification—Theory for the user
Sinha, N. K. (1989) · Automatica · doi:10.1016/0005-1098(89)90019-8 · Cited by 9,184
Åström, K. J., & Wittenmark, B. (1989) · Cited by 5,020
Adaptive filtering, prediction and control
Ioannou, P. (1985) · Automatica · doi:10.1016/0005-1098(85)90014-7 · Cited by 4,480
Adaptive filtering prediction and control
Goodwin, G. C., & Sin, K. S. (1984) · Cited by 3,400
Torque-maximizing field-weakening control: design, analysis, and parameter selection
Harnefors, L., Pietilainen, K., & Gertmar, L. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.904576 · Cited by 248
Temperature effects on torque production and efficiency of PM motors using NdFeB magnets
Sebastian, T. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.370284 · Cited by 246
Temperature effects on torque production and efficiency of PM motors using NdFeB magnets
Sebastian, T. (2002) · Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting · doi:10.1109/ias.1993.298907 · Cited by 167
Robust speed-controlled induction-motordrive usingEKF and RLS estimators
Lin, F. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960287 · Cited by 82
Application of EKF to parameter and state estimation of PMSM drive
Salvatore, L., & Stasi, S. (1992) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1992.0019 · Cited by 57
Cited by
Disturbance-Observer-Based Control and Related Methods—An Overview
Chen, W.-H., Yang, J., Guo, L., & Li, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2478397 · Cited by 2,985
Sliding-Mode Control for Systems With Mismatched Uncertainties via a Disturbance Observer
Yang, J., Li, S., & Yu, X. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2183841 · Cited by 1,332
Zhang, X., Sun, L., Zhao, K., & Sun, L. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2206610 · Cited by 725
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
Yang, J., Chen, W.-H., Li, S., Guo, L., & Yan, Y. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2583412 · Cited by 695
Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia
Li, S., & Liu, Z. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024655 · Cited by 676
Design and Implementation of Terminal Sliding Mode Control Method for PMSM Speed Regulation System
Li, S., Zhou, M., & Yu, X. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2226896 · Cited by 505
Improved non-singular fast terminal sliding mode control with disturbance observer for PMSM drives
Xu, B., Zhang, L., & Ji, W. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3083925 · Cited by 428
“Moreover, in [27], a simple adaptive current disturbance observer was proposed to estimate the time-varying nature and the high-bandwidth property for the PMSM control system.”
BackgroundNeural Network-Based Adaptive Dynamic Surface Control for Permanent Magnet Synchronous Motors
Yu, J., Shi, P., Dong, W., Chen, B., & Lin, C. (2015) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2014.2316289 · Cited by 315
Yang, J., Su, J., Li, S., & Yu, X. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2279232 · Cited by 285
Hou, Q., Ding, S., & Yu, X. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.2985054 · Cited by 283
Fuzzy Adaptive Internal Model Control Schemes for PMSM Speed-Regulation System
Li, S., & Gu, H. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2205581 · Cited by 265
Metadata
- Authors
- Mohamed, Y. A.-R. I.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2007-08
- Volume
- 54
- Issue
- 4
- Pages
- 1981-1988
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2118706662
- Cited by
- 324
- References
- 10
- FWCI
- 7.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.