The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
A Survey on Testing and Monitoring Methods for Stator Insulation Systems of Low-Voltage Induction Machines Focusing on Turn Insulation Problems
Abstract
A breakdown of the electrical insulation system causes catastrophic failure of the electrical machine and brings large process downtime losses. To determine the conditions of the stator insulation system of motor drive systems, various testing and monitoring methods have been developed. This paper presents an in-depth literature review of testing and monitoring methods, categorizing them into online and offline methods, each of which is further grouped into specific areas according to their physical nature. The main focus of this paper is on testing and monitoring techniques that diagnose the condition of the turn-to-turn insulation of low-voltage machines, which is a rapidly expanding area for both research and product development efforts. In order to give a compact overview, the results are summarized in two tables. In addition to monitoring methods on turn-to-turn insulation, some of the most common methods to assess the stator's phase-to-ground and phase-to-phase insulation conditions are included in the tables as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Report of Large Motor Reliability Survey of Industrial and Commercial Installations, Part I
(1985) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1985.349532 · Cited by 602
Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors
Bonnett, A. H., & Soukup, G. C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.148460 · Cited by 593
A Review of Stator Fault Monitoring Techniques of Induction Motors
Siddique, A., Yadava, G. S., & Singh, B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.837304 · Cited by 591
Online Diagnosis of Induction Motors Using MCSA
Jung, J.-H., Lee, J.-J., & Kwon, B.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.885131 · Cited by 570
Condition monitoring and fault diagnosis of electrical machines-a review
Nandi, S., & Toliyat, H. A. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.799956 · Cited by 531
Recent developments of induction motor drives fault diagnosis using AI techniques
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873207 · Cited by 511
Cause and analysis of stator and rotor failures in 3-phase squirrel cage induction motors
Bonnett, A. K., & Soukup, G. C. (2002) · Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference · doi:10.1109/papcon.1991.239667 · Cited by 489
What stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M. E. H., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 485
Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair
Stone, G. C., Culbert, I., Boulter, E. A., & Dhirani, H. (2014) · doi:10.1002/9781118886663 · Cited by 453
AI techniques in induction machines diagnosis including the speed ripple effect
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.658729 · Cited by 442
Transient model for induction machines with stator winding turn faults
Tallam, R. M., Habetler, T. G., & Harley, R. G. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.1003411 · Cited by 428
Self-citationDetection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Thorsen, O. V., & Dalva, M. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464536 · Cited by 344
A High-Resolution Frequency Estimation Method for Three-Phase Induction Machine Fault Detection
Kia, S. H., Henao, H., & Capolino, G.-A. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.899826 · Cited by 325
Kaufhold, M., Borner, G., Eberhardt, M., & Speck, J. (1996) · IEEE Electrical Insulation Magazine · doi:10.1109/57.537190 · Cited by 313
A new approach to on-line turn fault detection in AC motors
Kliman, G. B., Premerlani, W. J., Koegl, R. A., & Hoeweler, D. (2002) · IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting · doi:10.1109/ias.1996.557113 · Cited by 303
A Survey of Methods for Detection of Stator-Related Faults in Induction Machines
Tallam, R. M., Lee, S. B., Stone, G. C., Kliman, G. B., Yoo, J., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900448 · Cited by 301
Self-citationDiagnosis by parameter estimation of stator and rotor faults occurring in induction machines
Bachir, S., Tnani, S., Trigeassou, J.-C., & Champenois, G. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.874258 · Cited by 287
An unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345492 · Cited by 264
Self-citationThorsen, O. V., & Dalva, M. (2002) · Proceedings of IEEE Petroleum and Chemical Industry Technical Conference (PCIC '94) · doi:10.1109/pcicon.1994.347637 · Cited by 264
Ballal, M. S., Khan, Z. J., Suryawanshi, H. M., & Sonolikar, R. L. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888789 · Cited by 251
Lee, S. B., Tallam, R. M., & Habetler, T. G. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.810848 · Cited by 248
Self-citationAn unsupervised, on-line system for induction motor fault detection using stator current monitoring
Schoen, R. R., Lin, B. K., Habetler, T. G., Schlag, J. H., & Farag, S. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475698 · Cited by 239
Self-citationApplication of AI tools in fault diagnosis of electrical machines and drives-an overview
Awadallah, M. A., & Morcos, M. M. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811739 · Cited by 220
Martins, J. F., Pires, V. F., & Pires, A. J. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888790 · Cited by 219
Lee, S.-B., & Habetler, T. G. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.811789 · Cited by 202
Self-citationA survey of efficiency-estimation methods for in-service induction motors
Lu, B., Habetler, T. G., & Harley, R. G. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.876065 · Cited by 200
Self-citationDiagnosis of Stator Inter-Turn Short Circuits in DTC Induction Motor Drives
Cruz, S. M. A., & Cardoso, A. J. M. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.834012 · Cited by 185
Analysis of Cage Induction Motors with Stator Winding Faults
Williamson, S., & Mirzoian, K. (1985) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1985.319221 · Cited by 183
Induction motor stator faults diagnosis by a current concordia pattern-based fuzzy decision system
Zidani, F., El Hachemi Benbouzid, M., Diallo, D., & Nait-Said, M. S. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.815832 · Cited by 183
Ayhan, B., Chow, M.-Y., & Song, M.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878301 · Cited by 182
Induction machine condition monitoring with higher order spectra
Arthur, N., & Penman, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873211 · Cited by 170
Current monitoring for detecting inter-turn short circuits in induction motors
Stavrou, A., Sedding, H. G., & Penman, J. (2001) · IEEE Transactions on Energy Conversion · doi:10.1109/60.911400 · Cited by 168
Online stator fault diagnosis in inductionmotors
Arkan, M., Perović, D. K., & Unsworth, P. (2001) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20010588 · Cited by 164
Nandi, S., & Toliyat, H. A. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/28.980363 · Cited by 160
Cruz, S. M. A., & Cardoso, A. J. M. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847975 · Cited by 158
Effect of surge voltage risetime on the insulation of low-voltage machines fed by PWM converters
Melfi, M. J., Sung, A. M. J., Bell, S., & Skibinski, G. L. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.703971 · Cited by 151
Insulation failure prediction in AC machines using line-neutral voltages
Cash, M. A., Habetler, T. G., & Kliman, G. B. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.738983 · Cited by 149
Self-citationA review on induction motor online fault diagnosis
Ye, Z., & Wu, B. (2002) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/ipemc.2000.883050 · Cited by 143
Effect of surge voltage risetime on the insulation of low voltage machines fed by PWM converters
Melfi, M. J., Sung, J., Bell, S., & Skibinski, G. L. (2002) · Conference record · doi:10.1109/ias.1997.643034 · Cited by 137
Briz, F., Degner, M. W., Zamarrón, A., & Guerrero, J. M. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.813746 · Cited by 132
Kohler, J. L., Sottile, J., & Trutt, F. C. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.802935 · Cited by 121
Okubo, H., Hayakawa, N., & Montanari, G. C. (2007) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2007.4401236 · Cited by 116
Siddique, A., Yadava, G. S., & Singh, B. (2003) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2003.1234543 · Cited by 110
Alternatives for assessing the electrical integrity of induction motors
Kohler, J. L., Sottile, J., & Trutt, F. C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.158836 · Cited by 109
Huang, X., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900607 · Cited by 107
Self-citationStone, G. C., & Kapler, J. (1998) · IEEE Industry Applications Magazine · doi:10.1109/2943.715501 · Cited by 101
Hayakawa, N., & Okubo, H. (2005) · IEEE Electrical Insulation Magazine · doi:10.1109/mei.2005.1389265 · Cited by 98
Online condition monitoring of induction motors
Trutt, F. C., Sottile, J., & Kohler, J. L. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.804758 · Cited by 91
Mohammed, O. A., Abed, N. Y., & Ganu, S. (2006) · IEEE International Magnetics Conference · doi:10.1109/intmag.2006.376493 · Cited by 85
An Online Technique for Monitoring the Insulation Condition of AC Machine Stator Windings
Lee, S. B., Younsi, K., & Kliman, G. B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.853760 · Cited by 84
Sottile, J., Trutt, F. C., & Kohler, J. L. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.802921 · Cited by 80
Recent Important Changes in IEEE Motor and Generator Winding Insulation Diagnostic Testing Standards
Stone, G. C. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.840977 · Cited by 79
Induction motor fault detection by space vector angular fluctuation
Kostic-Perovic, D., Arkan, M., & Unsworth, P. J. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2000.881140 · Cited by 75
Cruz, S. M. A., Cardoso, A. J. M., & Toliyat, H. A. (2004) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2003.1257725 · Cited by 73
The detection of interturn short circuits in the stator windings of operating motors
Joksimović, G., & Penman, J. (2002) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.1998.724020 · Cited by 66
An Advanced Stator Winding Insulation Quality Assessment Technique for Inverter-Fed Machines
Yang, J., Cho, J., Lee, S. B., Yoo, J.-Y., & Kim, H.-D. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.916753 · Cited by 65
Interturn Fault Diagnosis in Induction Motors Using the Pendulous Oscillation Phenomenon
Mirafzal, B., Povinelli, R. J., & Demerdash, N. A. O. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.853767 · Cited by 64
Induction Motor Fault Detection by using Wavelet decomposition on dq0 components
Cusidó, J., Garcia, J. A. R., Ortega, J. A., et al. (2006) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2006.295949 · Cited by 33
Online condition monitoring of induction motors through signal processing
Chetwani, S. H., Shah, M. K., & Ramamoorty, M. (2005) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2005.202952 · Cited by 24
Detection of stator winding inter-turn short circuit fault in induction motors
Boqiang, X., Li, H., & Sun, L. (2005) · International Conference on Power System Technology (POWERCON) · doi:10.1109/icpst.2004.1460148 · Cited by 17
Stator fault estimation in induction motors using particle swarm optimization
Emara, H. M., Ammar, M. E., Bahgat, A. K., & Dorrah, H. T. (2003) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2003.1210645 · Cited by 16
Cited by
Opportunities and Challenges of Wireless Sensor Networks in Smart Grid
Gungor, V. C., Lu, B., & Hancke, G. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2039455 · Cited by 1,368
Self-citationGangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors
Gandhi, A., Corrigan, T., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2089937 · Cited by 544
A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
Qiao, W., & Lu, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2422112 · Cited by 533
Metadata
- Authors
- Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2008-12
- Volume
- 55
- Issue
- 12
- Pages
- 4127-4136
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2117171612
- Cited by
- 490
- References
- 62
- FWCI
- 27.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.