Fuzzy Sliding-Mode Control of Active Suspensions
The DOI matches its Crossref record.
Abstract
In this paper, a robust fuzzy sliding-mode controller for active suspensions of a nonlinear half-car model is introduced. First, a nonchattering sliding-mode control is presented. Then, this control method is combined with a single-input-single-output fuzzy logic controller to improve its performance. The negative value of the ratio between the derivative of error and error is the input and the slope constant of the sliding surface of the nonchattering sliding-mode controller is the output of the fuzzy logic controller. Afterwards, a four-degree-of-freedom nonlinear half-car model, which allows wheel hops and includes a suspension system with nonlinear spring and piecewise linear damper with dry friction, is presented. The designed controllers are applied to this model in order to evaluate their performances. It has been shown that the designed controller does not cause any problem in suspension working limits. The robustness of the proposed controller is also investigated for different vehicle parameters. The results indicate the success of the proposed fuzzy sliding-mode controller.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Li, H., Yu, J., Hilton, C., & Liu, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2202354 · Cited by 726
Sliding-Mode Control With Soft Computing: A Survey
Yu, X., & Kaynak, O. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027531 · Cited by 531
Jin, M., Lee, J., Chang, P. H., & Choi, C. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024097 · Cited by 428
Liu, Y.-J., Zeng, Q., Tong, S., Chen, C. L. P., & Liu, L. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2893847 · Cited by 289
Active Suspension Control With Frequency Band Constraints and Actuator Input Delay
Sun, W., Zhao, Y., Li, J., Zhang, L., & Gao, H. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134057 · Cited by 288
Approximation-Free Control for Vehicle Active Suspensions With Hydraulic Actuator
Huang, Y., Na, J., Wu, X., & Gao, G. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2798564 · Cited by 181
Metadata
- Authors
- Yagiz, N., Hacioglu, Y., & Taskin, Y.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2008-11
- Volume
- 55
- Issue
- 11
- Pages
- 3883-3890
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2150030751
- Cited by
- 166
- References
- 0
- FWCI
- 36.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.