The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Interphase Mutual Inductance in Polyphase Inductive Power Transfer Systems
Abstract
Roadway powered electric vehicles with minimal or no onboard energy storage have been proposed for many years, but the concept has only recently become feasible via three-phase inductive power transfer (IPT) systems. A wide zone can be created over which power transfer is relatively constant. This gives good tolerance to the alignment of the pickup relative to the track allowing simple low-cost pickup structures to be used. While three-phase IPT tracks make the vehicle pickup and power transfer simpler, they are difficult for the power supply to drive due to the presence of mutual coupling between the track phases resulting from the physical layout of the track. These mutual inductances induce voltages within each track phase that, because of the inductor-capacitor-inductor network, cause large currents within the power supply inverter and imbalances within the system. This paper presents an analytical assessment of the problems caused by the interphase mutual inductance, and three possible solutions. Two of the methods involve modifications to the track layout to alter or remove the mutual inductances, while the third and preferred technique requires additional ferrite cores between the various phases to compensate this adverse mutual inductance without affecting the power transfer to the pickup loads.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric and electric hybrid vehicle technology: a survey
Maggetto, G. (2000) · IEE Seminar on Electric, Hybrid and Fuel Cell Vehicles · doi:10.1049/ic:20000261 · Cited by 154
Cited by
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465
Covic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Self-citationCompensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Metadata
- Authors
- Kissin, M. L. G., Boys, J. T., & Covic, G. A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2009-07
- Volume
- 56
- Issue
- 7
- Pages
- 2393-2400
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2105013223
- Cited by
- 165
- References
- 1
- FWCI
- 9.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.