The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art
Abstract
This paper presents the latest progress in kinetic energy harvesting for wide applications ranging from implanted devices and wearable electronic devices to mobile electronics and self-powered wireless network nodes. The advances in energy harvesters adopting piezoelectric and electromagnetic transduction mechanisms are presented. Piezoelectric generators convert mechanical strain on the active material to electric charge while electromagnetic generators make use of the relative motion between a conductor and a magnetic flux to induce charge in the conductor. The existent kinetic piezoelectric generators including human-powered and vibration-based devices are comprehensively addressed. In addition, the electromagnetic generators which include resonant, rotational, and ¿hybrid¿ devices are reviewed. In the conclusion part of this paper, a comparison between the transduction methods and future application trends is given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008 · cited 1×
“the addition of a mass at the end of the beam, in a low-volume structure and high levels of strain in the piezoelectric layers [7].”
BackgroundA study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
Energy Scavenging for Mobile and Wireless Electronics
Paradiso, J. A., & Starner, T. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.9 · Cited by 2,653
Analysis of a micro-electric generator for microsystems
Williams, C. B., & Yates, R. B. (1996) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(96)80118-x · Cited by 1,407
Energy scavenging with shoe-mounted piezoelectrics
Shenck, N. S., & Paradiso, J. A. (2001) · IEEE Micro · doi:10.1109/40.928763 · Cited by 1,091
Improving Power Output for Vibration-Based Energy Scavengers
Roundy, S., Leland, E. S., Baker, J., Carleton, E., Reilly, E., Lai, E., Otis, B., Rabaey, J. M., Sundararajan, V., & Wright, P. K. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.14 · Cited by 1,031
Human-powered wearable computing
Starner, T. (1996) · IBM Systems Journal · doi:10.1147/sj.353.0618 · Cited by 876 · cited 1×
“Previous studies have shown that, for a 68-kg person walking with a speed of 2 steps/s and a heel movement of 5 cm, the maximum power that can be generated is 67 W [2].”
BackgroundMEMS power generator with transverse mode thin film PZT
Jeon, Y. B., Sood, R., Jeong, J.-H., & Kim, S.-G. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.032 · Cited by 795
An electromagnetic, vibration-powered generator for intelligent sensor systems
Glynne-Jones, P., Tudor, M. J., Beeby, S. P., & White, N. M. (2004) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2003.09.045 · Cited by 773
DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERS
DUTOIT, N. E., WARDLE, B. L., & KIM, S.-G. (2005) · Integrated Ferroelectrics · doi:10.1080/10584580590964574 · Cited by 759
Architectures for Vibration-Driven Micropower Generators
Mitcheson, P. D., Green, T. C., Yeatman, E. M., & Holmes, A. S. (2004) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2004.830151 · Cited by 753
Estimation of Electric Charge Output for Piezoelectric Energy Harvesting
Sodano, H. A., Park, G., & Inman, D. J. (2004) · Strain · doi:10.1111/j.1475-1305.2004.00120.x · Cited by 750
Analysis of power output for piezoelectric energy harvesting systems
Shu, Y. C., & Lien, I. C. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/001 · Cited by 737
Self-powered signal processing using vibration-based power generation
Amirtharajah, R., & Chandrakasan, A. P. (1998) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.668982 · Cited by 621
Parasitic power harvesting in shoes
Kymissis, J., Kendall, C., Paradiso, J., & Gershenfeld, N. (2002) · Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215) · doi:10.1109/iswc.1998.729539 · Cited by 621
Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations
Roundy, S., Wright, P. K., & Rabaey, J. M. (2012) · CERN Document Server (European Organization for Nuclear Research) · Cited by 552
ALLEN, J. J., & SMITS, A. J. (2001) · Journal of Fluids and Structures · doi:10.1006/jfls.2000.0355 · Cited by 529
Development of an electromagnetic micro-generator
Williams, C. B., Shearwood, C., Harradine, M. A., Mellor, P. H., Birch, T. S., & Yates, R. B. (2001) · IEE Proceedings - Circuits, Devices and Systems · doi:10.1049/ip-cds:20010525 · Cited by 507
Design and fabrication of a new vibration-based electromechanical power generator
El-hami, M., Glynne-Jones, P., White, N. M., Hill, M., Beeby, S., James, E., Brown, A. D., & Ross, J. N. (2001) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(01)00569-6 · Cited by 476
Optimum Piezoelectric Bending Beam Structures for Energy Harvesting using Shoe Inserts
Mateu, L., & Moll, F. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05055280 · Cited by 286
Development of an electromagnetic micro-generator
Shearwood, C., & Yates, R. B. (1997) · Electronics Letters · doi:10.1049/el:19971262 · Cited by 195
A novel thick-film piezoelectric micro-generator
White, N. M., Glynne-Jones, P., & Beeby, S. P. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/4/403 · Cited by 192
Analysis Of A Micro-electric Generator For Microsystems
Williams, C. B., & Yates, R. B. (2005) · Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95 · doi:10.1109/sensor.1995.717207 · Cited by 175
Implantable physiological power supply with PVDF film
Häsler, E., Stein, L., & Harbauer, G. (1984) · Ferroelectrics · doi:10.1080/00150198408017528 · Cited by 148
Piezoelectric energy harvesting for bio-MEMS applications
Ramsay, M. J., & Clark, W. W. (2001) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.429684 · Cited by 143
Mechanical Energy Harvester With Ultralow Threshold Rectification Based on SSHI Nonlinear Technique
Garbuio, L., Lallart, M., Guyomar, D., Richard, C., & Audigier, D. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2014673 · Cited by 142
An investigation of self-powered systems for condition monitoring applications
James, E. P., Tudor, J., Beeby, S., Harris, N. R., Glynne‐Jones, P., Ross, J. N., & White, N. M. (2003) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2003.10.057 · Cited by 131
Processing of PZT piezoelectric thick films on silicon for microelectromechancial systems
Beeby, S., Blackburn, A., & White, N. M. (1999) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/9/3/302 · Cited by 104
An investigation on piezoelectric energy harvesting for MEMS power sources
Sohn, J. W., Choi, S., & Lee, D. Y. (2005) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/095440605x16947 · Cited by 97
Yoon, H., Washington, G. N., & Danak, A. D. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05055759 · Cited by 85
A demonstration of useful electric energy generation from piezoceramics in a shoe
Shenck, N. S. (1999) · Cited by 60
Design and fabrication of piezoelectric micro power generators for autonomous microsystems
Basrour, S., Charlot, B., Marzencki, M., Grasso, A. D., Colin, M., & Valbin, L. (2005) · HAL · Cited by 59
Scavenging energy from human body:design of a piezoelectric transducer
Renaud, M., Sterken, T., Fiorini, P., Puers, R., Baert, K., & Hoof, C. A. V. (2005) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/sensor.2005.1496534 · Cited by 58
Vibration-based automatic power-generation system
Sasaki, K., Osaki, Y., Okazaki, J., et al. (2005) · Microsystem Technologies · doi:10.1007/s00542-005-0506-8 · Cited by 55
Vibrational energy scavenging with Si technology electromagnetic inertial microgenerators
Serre, C., Pérez-Rodríguez, A., Fondevilla, N., Morante, J. R., Montserrat, J., & Estéve, J. (2007) · Microsystem Technologies · doi:10.1007/s00542-006-0338-1 · Cited by 55
The Modelling of a Piezoelectric Vibration Powered Generator for Microsystems
Glynne‐Jones, P., Beeby, S., James, E. P., & White, N. M. (2001) · Springer eBooks · doi:10.1007/978-3-642-59497-7_10 · Cited by 53
Design and optimization of a biomechanical energy harvesting device
Niu, P., Chapman, P. L., DiBerardino, L. A., & Hsiao‐Wecksler, E. T. (2008) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2008.4592589 · Cited by 48
Design and performance of linear biomechanical energy conversion devices
Niu, P., & Chapman, P. L. (2006) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2006.1711996 · Cited by 42
Planar Brushless Magnetic Micromotors
Achotte, N., Gilles, P.-A., Cugat, P., et al. (2006) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2006.872232 · Cited by 22
Energy scavenging device in LTCC materials
Scherrer, S., Plumlee, D. G., & Moll, A. (2005) · IEEE Workshop on Microelectronics and Electron Devices (WMED) · doi:10.1109/wmed.2005.1431625 · Cited by 21
Cited by
Energy harvesting: State-of-the-art
Harb, A. (2011) · Renewable Energy · doi:10.1016/j.renene.2010.06.014 · Cited by 696
Niu, S., Wang, X., Yi, F., Zhou, Y. S., & Wang, Z. L. (2015) · Nature Communications · doi:10.1038/ncomms9975 · Cited by 694
Reverse electrowetting as a new approach to high-power energy harvesting
Krupenkin, T., & Taylor, J. A. (2011) · Nature Communications · doi:10.1038/ncomms1454 · Cited by 476
Wireless Information and Power Transfer With Full Duplex Relaying
Zhong, C., Suraweera, H. A., Zheng, G., Krikidis, I., & Zhang, Z. (2014) · IEEE Transactions on Communications · doi:10.1109/tcomm.2014.2357423 · Cited by 421
Tan, Y. K., & Panda, S. K. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2102321 · Cited by 418
Metadata
- Authors
- Khaligh, A., Zeng, P., & Zheng, C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2010-03
- Volume
- 57
- Issue
- 3
- Pages
- 850-860
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2171989079
- Cited by
- 669
- References
- 40
- FWCI
- 41.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.