The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Analysis and Implementation of a Novel Bidirectional DC–DC Converter
Abstract
A novel bidirectional dc-dc converter is presented in this paper. The circuit configuration of the proposed converter is very simple. The proposed converter employs a coupled inductor with same winding turns in the primary and secondary sides. In step-up mode, the primary and secondary windings of the coupled inductor are operated in parallel charge and series discharge to achieve high step-up voltage gain. In step-down mode, the primary and secondary windings of the coupled inductor are operated in series charge and parallel discharge to achieve high step-down voltage gain. Thus, the proposed converter has higher step-up and step-down voltage gains than the conventional bidirectional dc-dc boost/buck converter. Under same electric specifications for the proposed converter and the conventional bidirectional boost/buck converter, the average value of the switch current in the proposed converter is less than the conventional bidirectional boost/buck converter. The operating principle and steady-state analysis are discussed in detail. Finally, a 14/42-V prototype circuit is implemented to verify the performance for the automobile dual-battery system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
Self-citationA new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
A Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909248 · Cited by 780
Camara, M. B., Gualous, H., Gustin, F., Berthon, A., & Dakyo, B. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025283 · Cited by 394
A Maximum Power Point Tracking System With Parallel Connection for PV Stand-Alone Applications
Gules, R., De Pellegrin Pacheco, J., Hey, H. L., & Imhoff, J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.924033 · Cited by 354
A natural ZVS medium-power bidirectional DC-DC converter with minimum number of devices
Li, H., Peng, F. Z., & Lawler, J. S. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808965 · Cited by 296
Xie, Y., Sun, J., & Freudenberg, J. S. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2024151 · Cited by 250
Three-level bidirectional converter for fuel-cell/battery hybrid power system
Jin, K., Yang, M., Ruan, X., & Xu, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031197 · Cited by 245
A magnetic-less DC-DC converter for dual-voltage automotive systems
Peng, F. Z., Zhang, F., & Qian, Z. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808945 · Cited by 209
Novel forward–flyback hybrid bidirectional DC–DC converter
Zhang, F., & Yan, Y. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2009561 · Cited by 184 · cited 1×
“In order to recycle the leakageinductor energy and to minimize the voltage stress on the power devices, some literatures present the energyregeneration techniques to clamp the voltage stress on the power devices and to recycle the leakage-inductor energy [18], [19].”
BackgroundMultiphase Bidirectional Flyback Converter Topology for Hybrid Electric Vehicles
Bhattacharya, T., Giri, V. S., Mathew, K., & Umanand, L. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004661 · Cited by 177
Actively clamped bidirectional flyback converter
Chen, G., Lee, Y.-S., Hui, S. Y. R., Xu, D., & Wang, Y. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.857957 · Cited by 174
Ma, G., Qu, W., Yu, G., Liu, Y., Liang, N., & Li, W. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2017566 · Cited by 136
Schuch, L., Rech, C., Hey, H. L., Gründling, H. A., Pinheiro, H., & Pinheiro, J. R. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.880847 · Cited by 122
Design of a Reflex-Based Bidirectional Converter With the Energy Recovery Function
Chen, L.-R., Chu, N., Wang, C., & Liang, R. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918609 · Cited by 105
An On-Line UPS System With Power Factor Correction and Electric Isolation Using BIFRED Converter
Nasiri, A., Nie, Z., Bekiarov, S. B., & Emadi, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911199 · Cited by 104
Zero-current-switching switched-capacitor bidirectional DC–DC converter
Lee, Y.-S., & Chiu, Y.-Y. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050138 · Cited by 103
High-Efficiency Bidirectional Converter for Power Sources With Great Voltage Diversity
Wai, R., & Duan, R.-Y. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904167 · Cited by 103
New Bidirectional ZVS PWM Sepic/Zeta DC-DC Converter
Kim, I.-D., Paeng, S.-H., Ahn, J.-W., Nho, E., & Ko, J.-S. (2007) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2007.4374656 · Cited by 89
Current mode controlled bidirectional flyback converter
Venkatesan, K. (2003) · PESC record · doi:10.1109/pesc.1989.48567 · Cited by 84
Qian, T., & Lehman, B. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.911867 · Cited by 80
Comparison of Different Designs of a 42-V/14-V DC/DC Converter Regarding Losses and Thermal Aspects
Lee, S.-Y., Pfaelzer, A., & van Wyk, J. D. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.889808 · Cited by 57
Design of the Dynamic Power Compensation for PEMFC Distributed Power System
Zhu, X., Li, X., Shen, G., & Xu, D. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2041731 · Cited by 53
Asymmetrical pulse-width modulation bidirectional DC–DC converter
Lin, B., Huang, C.-L., & Lee, Y.-E. (2008) · IET Power Electronics · doi:10.1049/iet-pel:20070180 · Cited by 46
Cited by
Hybrid Switched-Inductor Converters for High Step-Up Conversion
Tang, Y., Fu, D., Wang, T., & Xu, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2364797 · Cited by 451
Review on Advanced Control Technologies for Bidirectional DC/DC Converters in DC Microgrids
Xu, Q., Vafamand, N., Chen, L., Dragicevic, T., Xie, L., & Blaabjerg, F. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2978064 · Cited by 439
High Step-Up DC–DC Converter With Active Switched-Inductor and Passive Switched-Capacitor Networks
Salvador, M. A., Lazzarin, T. B., & Coelho, R. F. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782239 · Cited by 438
Zhao, B., Song, Q., Liu, W., & Sun, W. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2210374 · Cited by 345
Nonisolated High Gain DC–DC Converter for DC Microgrids
Lakshmi, M., & Hemamalini, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733463 · Cited by 341
Metadata
- Authors
- Yang, L.-S., & Liang, T.-J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-01
- Volume
- 59
- Issue
- 1
- Pages
- 422-434
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2135527191
- Cited by
- 261
- References
- 24
- FWCI
- 11.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.