The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors
Abstract
The direct torque control (DTC) technique of permanent-magnet synchronous motors (PMSMs) receives increasing attention due to its advantages in eliminating the current controllers and quicker dynamic response, compared with other motor control algorithms. However, high torque and stator flux ripples remain in the system when using DTC technologies. This means large stator voltage and current harmonic contents exist in the PM motors. Since the variation of motor electromagnetic torque is related to the voltages that are applied to the motor, by analyzing the relationships between stator flux, torque, and voltages, a PMSM torque predictive control scheme is proposed in this paper. In each digital signal processor cycle, the optimized voltage is utilized to reduce torque ripple, and the voltage vector angle is determined by the output of torque and flux hysteresis controllers. The proposed scheme is simulated and experimentally verified. Both simulation and experimental results have shown that low torque ripple and reduced stator current harmonics are achieved by using the proposed scheme.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Foo, G., & Rahman, M. F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030815 · Cited by 198
Foo, G. H. B., & Rahman, M. F. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2036354 · Cited by 190
Cited by
Model Predictive Control for Power Converters and Drives: Advances and Trends
Vazquez, S., Rodriguez, J., Rivera, M., Franquelo, L. G., & Norambuena, M. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2625238 · Cited by 1,859
Torque Ripple Minimization of PMSM Based on Robust ILC Via Adaptive Sliding Mode Control
Liu, J., Li, H., & Deng, Y. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2711098 · Cited by 352
Metadata
- Authors
- Zhu, H., Xiao, X., & Li, Y.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-02
- Volume
- 59
- Issue
- 2
- Pages
- 871-877
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2082476877
- Cited by
- 201
- References
- 2
- FWCI
- 10.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.