The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A Load Adaptive Control Approach for a Zero-Voltage-Switching DC/DC Converter Used for Electric Vehicles
Abstract
This paper presents a load adaptive control approach to optimally control the amount of reactive current required to guarantee zero-voltage switching (ZVS) of the converter switches. The proposed dc/dc converter is used as a battery charger for an electric vehicle (EV). Since this application demands a wide range of load variations, the converter should be able to sustain ZVS from full-load to no-load condition. The converter employs an asymmetric auxiliary circuit to provide the reactive current for the full-bridge semiconductor switches, which guarantees ZVS at turn-on times. The proposed control scheme is able to determine the optimum value of the reactive current injected by the auxiliary circuit in order to minimize extra conduction losses in the power MOSFETs, as well as the losses in the auxiliary circuit. In the proposed approach, the peak value of the reactive current is controlled by controlling the switching frequency to make sure that there is enough current to charge and discharge the snubber capacitors during the deadtime. In addition, some practical issues of this application (battery charger for an EV) are discussed in this paper. Experimental results for a 2-kW dc/dc converter are presented. The results show an improvement in efficiency and better performance of the converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461
Krismer, F., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025284 · Cited by 470
Cited by
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
Chen, L.-R., Wu, S.-L., Shieh, D.-T., & Chen, T.-R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2186106 · Cited by 322
A Novel ZVZCS Full-Bridge DC/DC Converter Used for Electric Vehicles
Pahlevaninezhad, M., Das, P., Drobnik, J., Jain, P. K., & Bakhshai, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2178103 · Cited by 261
Self-citationSingle- and Three-Phase PHEV Onboard Battery Charger Using Small Link Capacitor
Yoo, K.-M., Kim, K.-D., & Lee, J.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2202361 · Cited by 74
A Single-Phase Battery Charger Design for LEV Based on DC-SRC with Resonant Valley-Fill Circuit
Lee, J.-Y., Yoon, Y.-D., & Kang, J.-W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2351371 · Cited by 44
Metadata
- Authors
- Pahlevaninezhad, M., Drobnik, J., Jain, P. K., & Bakhshai, A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-02
- Volume
- 59
- Issue
- 2
- Pages
- 920-933
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2170008684
- Cited by
- 223
- References
- 2
- FWCI
- 16.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Load Adaptive Control Approach for a Zero-Voltage-Switching DC/DC Converter Used for Electric Vehicles. https://app.cochat.ai/papers/10.1109/tie.2011.2161063
- The paper
- Pahlevaninezhad, M., Drobnik, J., Jain, P. K., & Bakhshai, A. (2012). A Load Adaptive Control Approach for a Zero-Voltage-Switching DC/DC Converter Used for Electric Vehicles. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2011.2161063
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.