The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Online Identification of Permanent Magnet Flux Based on Extended Kalman Filter for IPMSM Drive With Position Sensorless Control
Abstract
In order to realize precise rotor position/speed control of ac motor drives under sensorless operation, motor parameters should be online estimated. In this paper, the identification on permanent magnet flux of interior permanent magnet synchronous motor (IPMSM) under position sensorless control is investigated. A rotor-flux-oriented vector control with model reference adaptive system (MRAS)-based rotor position/speed estimation is employed as the basic control strategy for IPMSM drive. An identification scheme based on extended Kalman filter for the permanent magnet flux of IPMSM is proposed. By using this scheme, the identification problems due to low-order state equations of IPMSM can be avoided. Based on these works, the online permanent magnet flux identification of IPMSM with rotor position/speed senseless control is realized. Simulation and experimental results demonstrate the feasibility and effectiveness of the proposed control methods, which shows that the estimation error of rotor position based on the identified permanent magnet flux is limited within a very low level.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame
Morimoto, S., Kawamoto, K., Sanada, M., & Takeda, Y. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.800777 · Cited by 680
Extended kalman filter tuning in sensorless PMSM drives
Bolognani, S., Tubiana, L., & Zigliotto, M. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.818991 · Cited by 578
Online Parameter Estimation and Adaptive Control of Permanent-Magnet Synchronous Machines
Underwood, S. J., & Husain, I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2036029 · Cited by 502
Ichikawa, S., Tomita, M., Doki, S., & Okuma, S. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.870875 · Cited by 383
Rashed, M., MacConnell, P. F. A., Stronach, A. F., & Acarnley, P. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.895136 · Cited by 258
Piippo, A., Hinkkanen, M., & Luomi, J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911949 · Cited by 201
Robustness study of a model-based technique for mechanical sensorless PMSM
Nahid‐Mobarakeh, B., Meibody‐Tabar, F., & Sargos, F. M. (2002) · PESC record · doi:10.1109/pesc.2001.954219 · Cited by 31
A sensorless PMSM drive using a two stage extended Kalman estimator
Akrad, A., Hilairet, M., & Diallo, D. (2008) · doi:10.1109/iecon.2008.4758398 · Cited by 30
Cited by
Industrial Applications of the Kalman Filter: A Review
Auger, F., Hilairet, M., Guerrero, J. M., Monmasson, E., Orlowska-Kowalska, T., & Katsura, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236994 · Cited by 590
Foo, G. H. B., Zhang, X., & Vilathgamuwa, D. M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2244537 · Cited by 369
Zhang, X., & Hou, B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2691776 · Cited by 317
Rafaq, M. S., & Jung, J.-W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2944413 · Cited by 266
Kivanc, O. C., & Ozturk, S. B. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2018.2817246 · Cited by 264
Metadata
- Authors
- Shi, Y., Sun, K., Huang, L., & Li, Y.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-11
- Volume
- 59
- Issue
- 11
- Pages
- 4169-4178
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1996216641
- Cited by
- 353
- References
- 8
- FWCI
- 8.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.