The DOI matches its Crossref record.
Novel Isolated High-Step-Up DC–DC Converter With Voltage Lift
Abstract
A novel two-switch high-step-up isolated converter with voltage lift is proposed in this paper. The proposed isolated converter utilizes a transformer with low turn ratio to achieve high step-up gain. The secondary winding charges two boosting capacitors in parallel as switches during the switch-on period, and two boosting capacitors are discharged in series during the switch-off period. Thus, the converter has high voltage gain with appropriate duty ratio. In addition, by using two clamping diodes and a capacitor on the primary side, leakage energy is recycled, and the voltage spikes of the two active switches are clamped, thereby improving conversion efficiency. Finally, experimental results based on a prototype implemented in the laboratory with an input voltage of 24 V, an output voltage of 200 V, and an output power of 200 W verify the performance of the proposed isolated converter; full-load efficiency is nearly 93%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Ajami, A., Ardi, H., & Farakhor, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2360495 · Cited by 406
Banaei, M. R., & Sani, S. G. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2799876 · Cited by 276
Metadata
- Authors
- Liang, T.-J., Lee, J.-H., Chen, S.-M., Chen, J.-F., & Yang, L.-S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-04
- Volume
- 60
- Issue
- 4
- Pages
- 1483-1491
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2152251954
- Cited by
- 223
- References
- 0
- FWCI
- 3.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.