The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Analysis and Implementation of a New SEPIC-Based Single-Switch Buck–Boost DC–DC Converter With Continuous Input Current
Abstract
In this paper, a novel buck-boost dc-dc converter with continuous input current is proposed. The voltage gain of the presented converter is higher than conventional converters, such as buck-boost, single-ended primary-inductance converter, Cuk, and Zeta converters. This converter works only by one switch and voltage stress across the switch is low. Input current of the proposed converter is continuous so a large filter at the input is not needed. Furthermore, continuous input current has made this converter suitable for renewable energy and fuel cell applications. In this converter, noninverting output voltage is obtained and high gain of voltage is achieved as well. So it can operate at wide output voltage range only by changing the duty cycle of the power switch pulse. The presented converter can easily controlled in continuous conduction mode operation, because of using only one power switch. In the following, the principle of operation and the mathematical analyses of the proposed converter are explained, finally, validity of the proposed dc-dc converter is verified by the experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
High-Efficiency DC-DC Converter With High Voltage Gain and Reduced Switch Stress
Wai, R.-J., Lin, C.-Y., Duan, R.-Y., & Chang, Y.-R. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888794 · Cited by 450
Buck-Boost Converter for Sensorless Power Optimization of Piezoelectric Energy Harvester
Lefeuvre, E., Audigier, D., Richard, C., & Guyomar, D. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904230 · Cited by 439
Power Electronic Converters Modeling and Control: with Case Studies
Bacha, S., Munteanu, I., & Bratcu, A. I. (2014) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-5478-5 · Cited by 395
Novel High Step-Up DC–DC Converter for Fuel Cell Energy Conversion System
Changchien, S.-K., Liang, T., Chen, J.-F., & Yang, L.-S. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026364 · Cited by 369
A Hybrid Fuel Cell Power System
Jin, K., Ruan, X., Yang, M., & Xu, M. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2008336 · Cited by 331
Novel Isolated High-Step-Up DC–DC Converter With Voltage Lift
Liang, T.-J., Lee, J.-H., Chen, S.-M., Chen, J.-F., & Yang, L.-S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2177789 · Cited by 223
A Novel Structure for Single-Switch Nonisolated Transformerless Buck–Boost DC–DC Converter
Banaei, M. R., & Bonab, H. A. F. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2608321 · Cited by 213
Self-citationZhang, N., Zhang, G., See, K. W., & Zhang, B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2717462 · Cited by 204
Cited by
Wu, X., Wang, J., Zhang, Y., Du, J., Liu, Z., & Chen, Y. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00163-z · Cited by 42
Metadata
- Authors
- Banaei, M. R., & Sani, S. G.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2018-12
- Volume
- 33
- Issue
- 12
- Pages
- 10317-10325
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2786091483
- Cited by
- 276
- References
- 18
- FWCI
- 9.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis and Implementation of a New SEPIC-Based Single-Switch Buck–Boost DC–DC Converter With Continuous Input Current. https://app.cochat.ai/papers/10.1109/tpel.2018.2799876
- The paper
- Banaei, M. R., & Sani, S. G. (2018). Analysis and Implementation of a New SEPIC-Based Single-Switch Buck–Boost DC–DC Converter With Continuous Input Current. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2018.2799876
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.