The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Bearing Fault Detection by a Novel Condition-Monitoring Scheme Based on Statistical-Time Features and Neural Networks
Open accessAbstract
Bearing degradation is the most common source of faults in electrical machines. In this context, this work presents a novel monitoring scheme applied to diagnose bearing faults. Apart from detecting local defects, i.e., single-point ball and raceway faults, it takes also into account the detection of distributed defects, such as roughness. The development of diagnosis methodologies considering both kinds of bearing faults is, nowadays, subject of concern in fault diagnosis of electrical machines. First, the method analyzes the most significant statistical-time features calculated from vibration signal. Then, it uses a variant of the curvilinear component analysis, a nonlinear manifold learning technique, for compression and visualization of the feature behavior. It allows interpreting the underlying physical phenomenon. This technique has demonstrated to be a very powerful and promising tool in the diagnosis area. Finally, a hierarchical neural network structure is used to perform the classification stage. The effectiveness of this condition-monitoring scheme has been verified by experimental results obtained from different operating conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Curvilinear component analysis: a self-organizing neural network for nonlinear mapping of data sets
Demartines, P., & Herault, J. (1997) · IEEE Transactions on Neural Networks · doi:10.1109/72.554199 · Cited by 649
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Comparisons Among Clustering Techniques for Electricity Customer Classification
Chicco, G., Napoli, R., & Piglione, F. (2006) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2006.873122 · Cited by 513
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Statistical analysis of sound and vibration signals for monitoring rolling element bearing condition
Heng, R. B. W., & Nor, M. J. M. (1998) · Applied Acoustics · doi:10.1016/s0003-682x(97)00018-2 · Cited by 333
Stack, J. R., Habetler, T. G., & Harley, R. G. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.827454 · Cited by 290
A Probabilistic Fault Detection Approach: Application to Bearing Fault Detection
Zhang, B., Sconyers, C., Byington, C., Patrick, R., Orchard, M. E., & Vachtsevanos, G. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2058072 · Cited by 269
Frosini, L., & Bassi, E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026770 · Cited by 254
Machine Condition Prediction Based on Adaptive Neuro–Fuzzy and High-Order Particle Filtering
Chen, C., Zhang, B., Vachtsevanos, G., & Orchard, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098369 · Cited by 250
Garcia-Perez, A., Romero-Troncoso, R. D. J., Cabal-Yepez, E., & Osornio-Rios, R. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051398 · Cited by 235
Immovilli, F., Cocconcelli, M., Bellini, A., & Rubini, R. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025288 · Cited by 201
Lau, E. C. C., & Ngan, H. W. (2010) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2045927 · Cited by 178
Yu, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2167893 · Cited by 167
Cirrincione, M., Pucci, M., Cirrincione, G., et al. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816565 · Cited by 158
Self-citationCascade Neural-Network-Based Fault Classifier for Three-Phase Induction Motor
Ghate, V. N., & Dudul, S. V. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2053337 · Cited by 149
Fault Detection of Linear Bearings in Brushless AC Linear Motors by Vibration Analysis
Bianchini, C., Immovilli, F., Cocconcelli, M., Rubini, R., & Bellini, A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098354 · Cited by 126
Diagnosis of Three-Phase Electrical Machines Using Multidimensional Demodulation Techniques
Choqueuse, V., Benbouzid, M., Amirat, Y., & Turri, S. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2160138 · Cited by 122
A Simple Real-Time Fault Signature Monitoring Tool for Motor-Drive-Embedded Fault Diagnosis Systems
Akin, B., Choi, S., Orguner, U., & Toliyat, H. A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051936 · Cited by 113
Martins, L. A. O., Padua, F. L. C., & Almeida, P. E. M. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675519 · Cited by 101
Chacon-Murguia, M. I., & Gonzalez-Duarte, S. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2106093 · Cited by 90
Improving Elman Network using genetic algorithm for bearing failure diagnosis of induction motor
Mahamad, A. K., & Hiyama, T. (2009) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2009.5292794 · Cited by 16
Diagnosis by pattern recognition for PMSM used in more electric aircraft
Ondel, O., Boutleux, E., & Clerc, G. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119867 · Cited by 12
Currents and vibrations in asynchronous motor with externally induced vibration
Immovilli, F., Bianchini, C., Cocconcelli, M., Bellini, A., & Rubini, R. (2011) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2011.6063682 · Cited by 6
Cited by
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
“After feature extraction and selection by a nonlinear manifold learning technique, Prieto et al. [101] use a hierarchical neural network to perform classification for bearing fault detection.”
MethodZhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925
Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
Machine Health Monitoring Using Local Feature-Based Gated Recurrent Unit Networks
Zhao, R., Wang, D., Yan, R., Mao, K., Shen, F., & Wang, J. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733438 · Cited by 877
Metadata
- Authors
- Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-08
- Volume
- 60
- Issue
- 8
- Pages
- 3398-3407
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2058983449
- Cited by
- 461
- References
- 25
- FWCI
- 32.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.