The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Bearing Fault Detection by a Novel Condition-Monitoring Scheme Based on Statistical-Time Features and Neural Networks
Open accessAbstract
Bearing degradation is the most common source of faults in electrical machines. In this context, this work presents a novel monitoring scheme applied to diagnose bearing faults. Apart from detecting local defects, i.e., single-point ball and raceway faults, it takes also into account the detection of distributed defects, such as roughness. The development of diagnosis methodologies considering both kinds of bearing faults is, nowadays, subject of concern in fault diagnosis of electrical machines. First, the method analyzes the most significant statistical-time features calculated from vibration signal. Then, it uses a variant of the curvilinear component analysis, a nonlinear manifold learning technique, for compression and visualization of the feature behavior. It allows interpreting the underlying physical phenomenon. This technique has demonstrated to be a very powerful and promising tool in the diagnosis area. Finally, a hierarchical neural network structure is used to perform the classification stage. The effectiveness of this condition-monitoring scheme has been verified by experimental results obtained from different operating conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Curvilinear component analysis: a self-organizing neural network for nonlinear mapping of data sets
Demartines, P., & Herault, J. (1997) · IEEE Transactions on Neural Networks · doi:10.1109/72.554199 · Cited by 649
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Comparisons Among Clustering Techniques for Electricity Customer Classification
Chicco, G., Napoli, R., & Piglione, F. (2006) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2006.873122 · Cited by 513
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Statistical analysis of sound and vibration signals for monitoring rolling element bearing condition
Heng, R. B. W., & Nor, M. J. M. (1998) · Applied Acoustics · doi:10.1016/s0003-682x(97)00018-2 · Cited by 333
Stack, J. R., Habetler, T. G., & Harley, R. G. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.827454 · Cited by 290
A Probabilistic Fault Detection Approach: Application to Bearing Fault Detection
Zhang, B., Sconyers, C., Byington, C., Patrick, R., Orchard, M. E., & Vachtsevanos, G. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2058072 · Cited by 269
Frosini, L., & Bassi, E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026770 · Cited by 254
Cited by
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
“After feature extraction and selection by a nonlinear manifold learning technique, Prieto et al. [101] use a hierarchical neural network to perform classification for bearing fault detection.”
MethodZhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925
Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
Machine Health Monitoring Using Local Feature-Based Gated Recurrent Unit Networks
Zhao, R., Wang, D., Yan, R., Mao, K., Shen, F., & Wang, J. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733438 · Cited by 877
Data-Driven Methods for Predictive Maintenance of Industrial Equipment: A Survey
Zhang, W., Yang, D., & Wang, H. (2019) · IEEE Systems Journal · doi:10.1109/jsyst.2019.2905565 · Cited by 732
A novel deep autoencoder feature learning method for rotating machinery fault diagnosis
Shao, H., Jiang, H., Zhao, H., & Wang, F. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.03.034 · Cited by 684
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Self-citationRiera-Guasp, M., Antonino-Daviu, J. A., & Capolino, G.-A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2375853 · Cited by 573
Machine Learning for industrial applications: A comprehensive literature review
Bertolini, M., Mezzogori, D., Neroni, M., & Zammori, F. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.114820 · Cited by 553
Jia, F., Lei, Y., Guo, L., Lin, J., & Xing, S. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.07.032 · Cited by 517
Electric Locomotive Bearing Fault Diagnosis Using a Novel Convolutional Deep Belief Network
Shao, H., Jiang, H., Zhang, H., & Liang, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745473 · Cited by 488
Rolling element bearing fault diagnosis using convolutional neural network and vibration image
Hoang, D.-T., & Kang, H.-J. (2019) · Cognitive Systems Research · doi:10.1016/j.cogsys.2018.03.002 · Cited by 450
DCNN-Based Multi-Signal Induction Motor Fault Diagnosis
Shao, S., Yan, R., Lu, Y., Wang, P., & Gao, R. X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2925247 · Cited by 442
Motor Bearing Fault Diagnosis Using Trace Ratio Linear Discriminant Analysis
Jin, X., Zhao, M., Chow, T. W. S., & Pecht, M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273471 · Cited by 423
Heterogeneous Feature Models and Feature Selection Applied to Bearing Fault Diagnosis
Rauber, T. W., de Assis Boldt, F., & Varejao, F. M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327589 · Cited by 365
Ali, M. Z., Shabbir, M. N. S. K., Liang, X., Zhang, Y., & Hu, T. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2895797 · Cited by 349
Liu, R., Meng, G., Yang, B., Sun, C., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2645238 · Cited by 345
Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification
Luo, B., Wang, H., Liu, H., Li, B., & Peng, F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2807414 · Cited by 307
Wang, X.-B., Yang, Z.-X., & Yan, X.-A. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2787686 · Cited by 296
Sensor Fault Classification Based on Support Vector Machine and Statistical Time-Domain Features
Jan, S. U., Lee, Y.-D., Shin, J., & Koo, I. (2017) · IEEE Access · doi:10.1109/access.2017.2705644 · Cited by 291
Leite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274
“monitoring mechanical faults [8], [10], [11], [16]–[20].”
BackgroundFrosini, L., Harlisca, C., & Szabo, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2361115 · Cited by 264
Tran, M.-Q., Elsisi, M., Mahmoud, K., Liu, M.-K., Lehtonen, M., & Darwish, M. M. F. (2021) · IEEE Access · doi:10.1109/access.2021.3105297 · Cited by 158
“The method based on the curve component analysis was proposed to analyze vibration characteristics and to establish nonlinear data for the training dataset [11].”
MethodVan, M., & Kang, H.-J. (2016) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1177/0954406215573976 · Cited by 46
Metadata
- Authors
- Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-08
- Volume
- 60
- Issue
- 8
- Pages
- 3398-3407
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2058983449
- Cited by
- 461
- References
- 25
- FWCI
- 32.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.